Introduction
This manual provides essential information for the safe and effective use of your vhbw 1.6V 80mA replacement charger. Designed for various Philips Norelco grooming systems and beard trimmers, this charger ensures your device remains powered and ready for use. Please read these instructions carefully before using the product.
Image: General product banner for Philips Norelco Charger.
What's in the Box
- 1 x vhbw 1.6V 80mA Replacement Charger for Philips Norelco G370 (and compatible models)
Compatibility
This vhbw 1.6V 80mA charger is compatible with a wide range of Philips Norelco grooming systems and beard trimmers. Please verify your device's model number and the charger's connector type before use.
Compatible Models:
- Philips Norelco G370, G370/60 All-in-1 Grooming System Beard Hair Trimmer (4203-035-54870, 4203-035-78390, CRP386/01, CRP386, 4203-035-78410)
- Philips Norelco QC5015, QG3040, QG3080, QG3150, QG3020, QG3060, HQG164, QG3030, HQG267, HQG265 Trimmer Personal Groomer
- Philips Norelco Trimmer Multigroom Personal Groomer models: D350, G250, G270, G290, G380, G390, G470, G480 (part numbers 420303077990, 420303578420)
Important: This charger is NOT compatible with Philips Norelco MG3750 HQ840 or Philips HQ8505 series.
Image: A visual guide displaying several Philips Norelco trimmer models that are compatible with this replacement charger.
Image: A detailed close-up of the charger's barrel connector, highlighting its design for proper fit.
Setup
- Unpack the Charger: Carefully remove the vhbw replacement charger from its packaging.
- Inspect the Charger: Ensure the charger and its cable are free from any visible damage.
- Connect to Power: Plug the charger's AC adapter into a standard 100V-240V wall outlet.
- Connect to Device: Insert the barrel connector end of the charger cable firmly into the charging port of your compatible Philips Norelco grooming system or beard trimmer.
Image: The vhbw charger displaying its technical specifications: Input (110-240V), Output (1.6V 80mA), and Cable Length (5.9ft).
Image: The vhbw charger actively charging a Philips Norelco Multigroom trimmer, demonstrating typical use in a bathroom environment.
Video: This video demonstrates the general process of connecting a charger to a Philips Norelco trimmer. Please note that the specific trimmer model shown in the video may differ from your device, but the charging connection method is illustrative.
Operating Instructions
Once properly connected, your Philips Norelco device should begin charging. The charger is designed to provide a stable 1.6V DC output at 80mA. A full charge typically provides approximately 90 minutes of cordless operation for compatible devices. No oiling is required for the trimmer blades, simplifying maintenance.
Image: The vhbw charger positioned in the foreground, with a man in the background using a Philips Norelco trimmer, illustrating the product's purpose.
Safety Features
The vhbw charger is equipped with multiple safety mechanisms to protect your device and ensure safe operation:
- Over Current Protection: Prevents damage from excessive current flow.
- Over Voltage Protection: Safeguards against voltage spikes.
- Short Circuit Protection: Automatically cuts power in case of a short circuit.
- Over Temperature Protection: Monitors and regulates the charger's temperature to prevent overheating.
These features ensure a safe charging experience for your Philips Norelco grooming device. The charger is CE/FCC/RoHS listed, confirming its adherence to international safety standards.
Image: A graphic illustrating the comprehensive safety features of the vhbw charger, including protection against over-charge, short-circuit, over-heat, over-current, and over-voltage.
Specifications
| Brand | vhbw |
| Model Number | G370 |
| Input Voltage | AC 100V-240V |
| Output | DC 1.6V 80mA |
| Cable Length | 4.9 ft (1.5 m) |
| Connector Type | Barrel Connector |
| Color | Black |
| Product Dimensions | 2.85 x 1 x 1.68 inches |
| Item Weight | 2.89 ounces |
| Special Features | Over Current Protection, Over Voltage Protection, Short Circuit Protection, Over Temperature Protection |
Troubleshooting
- Device not charging:
- Ensure the charger is securely plugged into a working wall outlet.
- Verify that the charger's barrel connector is fully inserted into your device's charging port.
- Confirm your device is listed under the compatible models.
- Check for any visible damage to the charger cable or connector.
- Charger feels hot:
- A slight warmth during charging is normal. If the charger becomes excessively hot, unplug it immediately.
- Ensure adequate ventilation around the charger and device during charging.
- Device not holding a charge:
- This may indicate an issue with your device's battery rather than the charger. Consult your device's manual or manufacturer for battery replacement options.
Warranty and Support
For any questions, concerns, or warranty claims regarding your vhbw replacement charger, please contact the manufacturer or the seller directly. Keep your purchase receipt as proof of purchase.