Trijicon SRO 2.5 MOA Adjustable LED Reflex Red Dot Sight User Manual

1. Introduction

Thank you for choosing the Trijicon SRO 2.5 MOA Adjustable LED Reflex Red Dot Sight. This manual provides essential information for the proper installation, operation, and maintenance of your new optic. Please read these instructions carefully before use to ensure safe and optimal performance.

The Trijicon SRO (Specialized Reflex Optic) is engineered for superior performance in pistol and rifle applications, offering a large, clear field of view and a crisp red dot for rapid target acquisition.

2. Safety Information

Always handle firearms and optics responsibly. Follow all local, state, and federal laws regarding firearm ownership and use. Ensure the firearm is unloaded and safe before installing, adjusting, or performing maintenance on the red dot sight.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

3. Product Features

• Large, Unobstructed Field of View: Designed to be parallax-free and compatible with suppressor-height iron sights.
• Clear, Crisp 2.5 MOA Red Dot: Features a fine-tuned, illuminated reticle and an exceptionally clear front lens for a precise sight picture.
• Easy, Adjustable Windage & Elevation: Tool-less design allows for hassle-free zeroing.
• Red Dot Pistol Ready: Compatible with many popular red-dot-ready pistol brands (mount not included).
• RMR Footprint: Mounts easily using the same base as the Trijicon RMR (mount not included).
• Durable Construction: Made from aluminum for robust performance.

Figure 3.1: Front view of the Trijicon SRO 2.5 MOA Red Dot Sight.

4. Package Contents

Upon opening your Trijicon SRO package, please verify that all components are present:

• Trijicon SRO 2.5 MOA Adjustable LED Reflex Red Dot Sight
• Product documentation (manual, warranty card)

5. Setup

5.1. Mounting the SRO

The Trijicon SRO utilizes the same mounting footprint as the Trijicon RMR. Ensure you have a compatible mounting plate or slide cut for installation. Refer to your firearm's manual or the mounting plate instructions for specific torque specifications and installation procedures.

• Align the SRO with the mounting plate or slide cut.
• Secure the SRO using the appropriate screws. Apply thread locker if recommended by the mount manufacturer.
• Tighten screws to the manufacturer's specified torque. Overtightening can damage the optic or mount.

Figure 5.1: The SRO shares the same mounting footprint as the RMR.

5.2. Battery Installation

The Trijicon SRO features a top-loading battery compartment, allowing for battery replacement without removing the optic from the firearm or losing zero.

• Locate the battery cap on the top of the SRO housing.
• Using a flathead screwdriver or coin, carefully unscrew the battery cap counter-clockwise.
• Insert a fresh CR2032 lithium battery with the positive (+) side facing up.
• Replace the battery cap and screw it clockwise until snug. Do not overtighten.

Figure 5.2: Top-loading battery compartment for easy replacement.

6. Operating Instructions

6.1. Power On/Off and Brightness Adjustment

The SRO features an automatic brightness mode and manual adjustment controls.

• Automatic Mode: The SRO will automatically adjust dot brightness based on ambient light conditions.
• Manual Mode: Press the '+' or '-' buttons located on the sides of the optic to cycle through the brightness settings. The SRO has multiple brightness levels, including super-bright settings for outdoor use and lower settings for night vision compatibility.
• To turn off the SRO, hold down the '-' button for approximately 3 seconds until the dot extinguishes.

Figure 6.1: Brightness adjustment buttons on the side of the SRO.

6.2. Windage and Elevation Adjustment

The SRO features tool-less windage and elevation adjustments. Each click adjusts the point of impact by 1 MOA (Minute of Angle).

• Elevation Adjustment: The elevation dial is located on the top of the optic. Turn the dial clockwise to move the point of impact UP, and counter-clockwise to move it DOWN.
• Windage Adjustment: The windage dial is located on the right side of the optic. Turn the dial clockwise to move the point of impact RIGHT, and counter-clockwise to move it LEFT.
• Perform adjustments carefully, making small changes and verifying impact shifts at the range.

Figure 6.2: Side view showing windage and elevation adjustment dials.

7. Maintenance

Proper maintenance ensures the longevity and reliability of your Trijicon SRO.

• Cleaning the Lenses: Use a soft, clean cloth and lens cleaning solution specifically designed for optics. Avoid abrasive materials or harsh chemicals. Gently wipe the lenses to remove dust and smudges.
• Cleaning the Housing: Wipe the exterior housing with a damp cloth to remove dirt and debris.
• Battery Replacement: Replace the CR2032 battery annually or when the dot appears dim or flickers.
• Storage: Store the SRO in a dry, temperature-controlled environment when not in use.

8. Troubleshooting

If you encounter issues with your Trijicon SRO, consider the following common troubleshooting steps:

• Dot Not Visible: Check if the battery is correctly installed and has sufficient charge. Replace the battery if necessary. Ensure the brightness is adjusted appropriately for ambient light conditions.
• Dot Flickering or Dim: This often indicates a low battery. Replace the CR2032 battery.
• Inaccurate Zero / Not Holding Zero: Ensure the SRO is securely mounted to the firearm. Check mounting screws for proper torque. Verify that the windage and elevation adjustments are not loose.
• Distorted Dot: While the SRO is designed for a crisp dot, individual astigmatism can sometimes cause the dot to appear distorted. Try viewing the dot through a rear iron sight or a small aperture to see if the distortion persists. If it does, and you suspect a product defect, contact Trijicon support.

For further assistance, please contact Trijicon customer support.

9. Specifications

10. Warranty and Support

The Trijicon SRO 2.5 MOA Adjustable LED Reflex Red Dot Sight comes with a 2 Year Manufacturer Warranty. Please retain your proof of purchase for warranty claims.

For warranty service, technical support, or additional product information, please visit the official Trijicon website or contact their customer service department directly.

Trijicon Official Website: www.trijicon.com