ABUSVEX Original Galaxy S10 Screen Replacement Kit User Manual

1. Product Overview

This product is a high-quality replacement outer lens glass for the Samsung Galaxy S10 G9730 series. It is designed to replace a cracked or scratched front glass lens only and does not include the OLED digitizer or LCD screen. The kit provides the necessary glass and specialized tools for the replacement procedure.

Compatibility:

• Samsung Galaxy S10 G9730
• Samsung Galaxy S10 G973F
• Samsung Galaxy S10 G973U
• Samsung Galaxy S10 G973N
• Samsung Galaxy S10 G973
• Samsung Galaxy S10 G973D/S

2. Safety Information and Important Considerations

WARNING: This is an extremely technical and delicate repair procedure. Attempting this repair without proper knowledge, experience, and caution can result in permanent damage to your device, including the OLED screen. The manufacturer cannot accept responsibility for any damage incurred during the replacement process.

• Professional Installation Recommended: This procedure is favored by professional technicians. It is strongly recommended that individuals without prior experience in smartphone screen repair seek professional assistance.
• Glass Handling: The replacement glass is fragile. Handle with extreme care to prevent breakage or injury.
• Heat Application: A hairdryer or heat gun is required. Use caution to avoid overheating the device, which can damage internal components or cause burns.
• Battery Safety: Ensure the device is powered off and disconnected from any power source before beginning the repair.
• Eye Protection: Consider wearing eye protection to guard against small glass fragments.

3. Package Contents

Verify that all items listed below are present in your kit:

• 1 x Replacement Glass Lens Cover (for Samsung Galaxy S10)
• 1 x Set of Repair Tools (various screwdrivers, pry tools, suction cup, picks)
• 1 x Metallic Wire (for separating glass from OLED)
• 1 x Tweezers
• 1 x Cleaning Cloth

Figure 3.1: Contents of the ABUSVEX Galaxy S10 Screen Replacement Kit, including the glass lens, various screwdrivers, pry tools, a suction cup, picks, metallic wire, and tweezers.

4. Additional Tools and Materials Required (Not Included)

The following items are essential for a successful repair and are not supplied with this kit:

• Hairdryer or Heat Gun: Necessary to soften the adhesive holding the original glass.
• Packing Tape / Scotch Tape: Recommended to cover the cracked screen to prevent small glass fragments from falling onto the digitizer during removal.
• B7000 or T7000 Adhesive: For re-attaching the new glass lens.
• Clean, Dust-Free Workspace: To prevent dust or debris from getting under the new screen.

5. Installation Instructions (Glass-Only Replacement)

This section outlines the general steps for replacing the outer glass lens. This procedure requires patience and precision. If you are unsure at any point, please consult a professional.

Preparation:

1. Power Off Device: Completely power off your Samsung Galaxy S10.
2. Secure Cracked Glass: Apply packing tape or scotch tape over the entire cracked screen surface. This helps contain glass fragments and provides a more stable surface for removal.
3. Heat Application: Use a hairdryer or heat gun to gently heat the edges of the phone screen. Focus on one section at a time to soften the adhesive. Do not overheat.

Removing the Old Glass:

4. Initial Separation: Carefully use the suction cup to create a small gap between the glass and the frame. Insert a thin pry tool or plastic pick into this gap.
5. Wire Separation (Professional Method): This kit includes a metallic wire for separating the glass from the OLED. Once a small gap is created, carefully slide the metallic wire between the glass and the OLED panel. Slowly and gently move the wire across the entire screen, cutting through the adhesive. This step is critical and requires extreme care to avoid damaging the delicate OLED.
6. Remove Glass: Once the adhesive is sufficiently cut, carefully lift and remove the old, cracked glass.
7. Clean OLED: Thoroughly clean the underlying OLED panel to remove any remaining adhesive residue or glass fragments. Ensure the surface is pristine and dust-free.

Figure 5.1: Illustration of the replacement glass lens positioned over a Samsung Galaxy S10, demonstrating the precise fit and camera cutout alignment.

Installing the New Glass:

8. Apply Adhesive: Apply a thin, even layer of B7000 or T7000 adhesive (not included) around the edges of the phone frame where the glass will sit. Be careful not to apply too much or get it on the OLED.
9. Position New Glass: Carefully align the new replacement glass lens with the phone frame, ensuring the camera cutout and edges match perfectly.
10. Secure Glass: Gently press the new glass into place. Apply light, even pressure around the edges to ensure proper adhesion.
11. Curing: Allow the adhesive to cure for the recommended time (typically 24-48 hours), ideally using clamps or rubber bands to hold the screen firmly in place during this period.
12. Final Cleaning: Once the adhesive is fully cured, clean any excess adhesive from the edges and wipe the new screen with the provided cleaning cloth.

Figure 5.2: A detailed view of the replacement glass lens, highlighting its precise dimensions and the cutout for the front camera, ensuring a perfect fit for the Samsung Galaxy S10.

6. Troubleshooting

This section addresses common issues that may arise during or after the glass replacement.

7. Specifications

• Product Type: Front Outer Lens Glass Screen Replacement Kit
• Compatibility: Samsung Galaxy S10 G9730, G973F, G973U, G973N, G973, G973D/S Series (6.1-inch)
• Material: High-Quality Tempered Glass
• Color: Black
• Package Dimensions: 6.81 x 3.39 x 1.06 inches
• Item Weight: 2.89 ounces
• Manufacturer: ABUSVEX
• Country of Origin: China
• ASIN: B07RZB1KJY

8. Warranty and Support

Information regarding specific warranty terms for this product is not provided in the available documentation. For any product-related inquiries, technical support, or warranty claims, please contact the seller directly through the platform where the purchase was made.

Please note that damage incurred during the installation process is typically not covered under warranty due to the technical nature of the repair.

9. Official Product Videos

There are no official product videos provided by the seller for this item in the available data. For visual guidance on the repair process, it is recommended to search for independent repair tutorials specific to "Samsung Galaxy S10 glass-only replacement" on video-sharing platforms. Exercise caution and verify the credibility of any third-party content.