DR.PREPARE Boot and Shoe Dryer with Ozone Function

1. Introduction

Thank you for choosing the DR.PREPARE Boot and Shoe Dryer. This device is designed to efficiently dry and deodorize various types of footwear and gear using controlled heat circulation and an optional ozone function. Please read this manual thoroughly before operation to ensure proper use and to maintain the product's longevity.

Safety Information

• Always unplug the dryer when not in use or before cleaning.
• Do not immerse the unit in water or other liquids.
• Ensure the power cord is not damaged and is placed away from heat sources.
• Keep out of reach of children.
• Do not block the air vents during operation.
• Use only on a stable, flat surface.
• This appliance is for household use only.

This image highlights the safety features of the DR.PREPARE Boot Dryer, including fire-resistant materials, air vents for proper circulation, and over-current protection.

2. Product Overview

Familiarize yourself with the components of your DR.PREPARE Boot and Shoe Dryer.

This image displays the DR.PREPARE Boot Dryer with key components labeled: Warm Air Vent, Stretchable Rack, Button To Shrink Rack, Smart Control Panel, and Vent. The dryer is shown in its upright, ready-to-use position.

Key Features:

• Heat Circulation: Provides constant, optimal heat (104-122°F) for effective drying.
• Ozone Function: Optional feature to eliminate odors caused by sweat. Operates for 20 minutes per use.
• Intelligent Timer: Adjustable drying timer (1-99 minutes) and reservation timer (0.5-24 hours).
• Folding Design: 90-degree folding for compact storage and portability.
• Adjustable Racks: Telescoping tubes extend up to 14.1 inches to reach into various footwear types.

3. Setup

1. Unpack: Carefully remove the dryer from its packaging.
2. Position: Place the dryer on a flat, stable, and heat-resistant surface. Ensure adequate ventilation around the unit.
3. Unfold: Gently unfold the drying racks to their upright position (90 degrees).
4. Extend Racks: Press the button on the side of each rack to extend the telescoping tubes to the desired length, accommodating your footwear or gear.
5. Connect Power: Plug the power cord into a standard electrical outlet. The display will illuminate.

This image shows the DR.PREPARE Boot Dryer in its fully assembled, upright position, ready for use. The black unit features two drying racks and a control panel at the base.

4. Operating Instructions

Placing Items for Drying

• Place shoes, boots, gloves, hats, or socks onto the drying racks. Ensure the items are positioned to allow warm air to circulate freely inside.
• For optimal drying, ensure the opening of the footwear or gear is aligned with the warm air vents.

This image illustrates the correct and incorrect ways to place shoes on the dryer for efficient drying. The correct method shows shoes inverted with openings over the vents, while the incorrect method shows them upright, blocking airflow.

Using the Control Panel

This image details the 'SMART TIMERS' feature, showing a close-up of the control panel with a digital display set to '99' minutes. Text explains the Drying timer (1-99 minutes), Reservation feature (0.5-24 hours), and optional Ozone function (20 minutes per time).

1. Power On/Off: Press the power button to turn the unit on or off.
2. Set Drying Timer: Press the 'TIMER' button to activate the drying timer. Use the '+' and '-' buttons to adjust the drying duration from 1 to 99 minutes. The dryer will automatically shut off once the timer expires.
3. Activate Ozone Function: Press the 'OZONE' button to enable the odor elimination feature. The ozone function will run for 20 minutes and then automatically turn off. This can be used independently or concurrently with the drying function.
4. Reservation Feature: To set a delayed start, press the 'TIME' button (often labeled with a clock icon). Use the '+' and '-' buttons to set the activation time from 0.5 to 24 hours. The dryer will begin its operation after the set reservation time has elapsed.

Drying Process

• The dryer circulates warm air at a temperature range of 104-122°F (40-50°C) to gently dry items without causing damage.
• Drying times vary based on material, wetness, and ambient conditions.

This image illustrates the 'OZONE + HEAT CIRCULATION' feature of the boot dryer, showing red arrows indicating warm air and O3 molecules circulating to remove wetness and odors. Icons for 'no wet' and 'no bacteria' are also present.

This image highlights the 'ALL-PURPOSE' functionality of the boot dryer, showing various items it can dry: Work Boots, Soccer Cleats, Sneakers, Gloves, Hat, and Socks. The dryer is centrally placed.

5. Maintenance

Cleaning

• Before cleaning, ensure the dryer is unplugged and completely cool.
• Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Do not allow water to enter the air vents.

Storage

• When not in use, unplug the dryer.
• Fold the drying racks down to their compact position for easy storage.

This image shows the DR.PREPARE Boot Dryer in its folded position, demonstrating its compact design for convenient storage or travel.

6. Troubleshooting

7. Specifications

• Model Number: DSD-0N3200W-US
• Product Dimensions: 10.63 x 3.54 x 6.89 inches
• Item Weight: 2.27 pounds
• Manufacturer: DR.PREPARE
• Form Factor: Freestanding
• Access Location: Top Load
• Drying Temperature: 104-122°F (40-50°C)
• Drying Timer: 1-99 minutes
• Reservation Timer: 0.5-24 hours
• Ozone Cycle: 20 minutes per use

8. Warranty and Support

DR.PREPARE provides a 12-month warranty for this product from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use.

For any problems, concerns, or warranty claims, please contact DR.PREPARE customer support. Our team is committed to providing a satisfying shopping experience and prompt assistance.

Contact Information: Please refer to the product packaging or the official DR.PREPARE website for the most current customer support contact details.