Anivia Gaming Headset AH28plus Instruction Manual

Introduction

Thank you for choosing the Anivia AH28plus Gaming Headset. This manual provides essential information for setting up, operating, and maintaining your headset to ensure an optimal gaming and audio experience. Please read these instructions carefully before use.

The Anivia AH28plus Gaming Headset, featuring a sleek purple and black design.

Product Features

• Ergonomic Design: Retractable headband and soft memory foam earmuffs for extended comfort during long gaming sessions.
• High-Quality Audio: 50mm large drive units deliver powerful stereo sound with clear bass.
• Noise-Cancelling Microphone: High-end noise cancellation ensures clear communication. The microphone can be flipped up to mute.
• In-line Controls: Convenient volume control and microphone on/off switch located on the cable.
• Wide Compatibility: Compatible with PC, PS4, Xbox One (newer models with 3.5mm jack, older models require an adapter), Nintendo Switch (audio only, mic invalid), and 3DS (audio only, mic invalid).

Detailed view of the headset highlighting its design and components.

Official product video showcasing the Anivia AH28plus Gaming Headset's features and design.

Package Contents

• Anivia AH28plus Gaming Headset
• PC Splitter 3.5mm cable (for separate headphone and microphone jacks)

The Anivia AH28plus Gaming Headset as packaged, including the headset and PC splitter cable.

Setup Instructions

Connecting to PC:

1. Locate the 3.5mm audio jack on your PC.
2. If your PC has separate ports for microphone and headphones, use the included PC splitter 3.5mm cable. Connect the headset's single 3.5mm jack to the splitter, then plug the green connector into your PC's headphone jack and the red connector into the microphone jack.
3. If your PC has a single combined 3.5mm audio jack, plug the headset's single 3.5mm jack directly into the port.
4. Adjust audio settings on your PC as needed.

Connecting to PS4/PS5 Controller:

1. Plug the headset's 3.5mm jack directly into the controller's audio port.
2. Go to System Settings > Devices > Audio Devices.
3. Set 'Output to Headphones' to 'All Audio'.

Connecting to Xbox One/Series X|S Controller:

1. For newer Xbox controllers with a 3.5mm audio jack, plug the headset directly into the controller.
2. For older Xbox One controllers without a 3.5mm jack, a Microsoft Stereo Headset Adapter (not included) is required. Plug the headset into the adapter, then the adapter into the controller.

Connecting to Nintendo Switch/3DS:

1. Plug the headset's 3.5mm jack directly into the console's audio port.
2. Note: For Nintendo Switch and 3DS, only audio output is supported. The microphone function is not compatible with these consoles.

Visual guide to connecting the headset to different gaming platforms, including PC, PlayStation, Xbox, and Nintendo devices.

Operating Instructions

Volume Control:

The headset features an in-line volume control wheel on the cable. Rotate the wheel up or down to adjust the audio volume to your desired level.

Microphone Usage:

The microphone is integrated into the left earcup and can be adjusted. To activate the microphone, pull it down into position. To mute the microphone, flip it upwards or use the in-line switch on the cable.

Close-up of the headset's in-line controls, including the volume wheel and microphone mute switch.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the headset. Do not use harsh chemicals or abrasive materials.
• Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
• Cable Care: Avoid sharp bends or excessive pulling on the cable to prevent damage.

Troubleshooting

Specifications

Warranty and Support

For warranty information and customer support, please refer to the product packaging or contact Anivia customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.