Godox Xpro-C & X1R-C Wireless Flash System User Manual

1. Product Overview

The Godox Xpro-C TTL Wireless Flash Trigger and X1R-C Receiver system is designed for seamless integration with Canon EOS cameras, offering comprehensive flash control. This system supports TTL autoflash, 1/8000s high-speed sync, multi-flash, manual flash, Flash Exposure Compensation (FEC), TCM Transform Function, Magnetic Function, One-Shoot & Multi-Shoot Setting, Group Modeling Lamp Control, Group Zooming, and simultaneous adjustment of all groups' output values.

It can function as a wireless Godox flash trigger for camera, outdoor, and studio flashes, a wireless Canon Speedlites trigger, or a wireless shutter release trigger. It also supports flash triggering via a 2.5mm sync cord jack for flashes without the Godox X system.

Figure 1.1: Godox Xpro-C Transmitter and two X1R-C Receivers.

2. What's in the Box

Your package should contain the following items:

• 1 x Godox Xpro-C TTL Wireless Flash Trigger Transmitter
• 2 x Godox X1R-C Controller Receiver
• 1 x User Manual

Figure 2.1: Versatile Usage Methods of the Godox 2.4G Wireless X System.

3. Setup

3.1 Installing Batteries

The Xpro-C transmitter requires two AA batteries for operation. The X1R-C receivers also require batteries (typically AA, check receiver manual for specifics). Ensure batteries are inserted with correct polarity.

3.2 Mounting the Transmitter and Receiver

1. Mount the Xpro-C transmitter onto your camera's hot shoe. Secure it by tightening the locking ring.
2. Attach the X1R-C receiver to your compatible Canon flash unit's hot shoe.
3. For studio flashes or other lighting equipment, connect the X1R-C receiver to the flash's 2.5mm sync cord jack if direct hot shoe mounting is not applicable.

Figure 3.2: Xpro-C Transmitter mounted on camera and X1R-C Receiver on a flash.

4. Operating Instructions

4.1 Powering On and Basic Interface

Turn on both the Xpro-C transmitter and the X1R-C receivers. The Xpro-C features an extra-large LCD panel for clear display of settings. Use the 5 group buttons and 4 function buttons for navigation and control.

Figure 4.1: Xpro-C Transmitter LCD and controls.

4.2 Wireless Control and Triggering

The Godox Xpro-C supports 16 groups and 32 channels for wireless control and triggering. This allows for precise management of multiple flash units. Adjust settings such as TTL autoflash, manual flash power, and high-speed sync directly from the Xpro-C transmitter.

• TTL Autoflash: Automatically adjusts flash output for correct exposure.
• Manual Flash: Allows precise control over flash power output.
• High-Speed Sync (HSS): Enables flash synchronization at shutter speeds up to 1/8000s.
• Multi Flash (Stroboscopic): Fires a series of rapid flashes for creative effects.
• Flash Exposure Compensation (FEC): Adjusts flash output relative to the metered exposure.
• TCM Function: Converts TTL flash values into manual output values for consistent results.
• Group Control: Independently control up to 5 groups (A, B, C, D, E) of flashes.

4.3 Focus Assist Lamp

The Xpro-C transmitter includes a focus assist lamp to aid in achieving sharp focus in low-light conditions.

4.4 Firmware Upgrade

The Xpro-C supports firmware upgrades via its Type-C USB port. Visit the official Godox website for the latest firmware and instructions.

5. Maintenance

• Keep the devices clean by wiping them with a soft, dry cloth.
• Avoid exposing the units to extreme temperatures, humidity, or direct sunlight.
• Remove batteries if the units will not be used for an extended period to prevent leakage and damage.
• Store in a cool, dry place, preferably in a protective case.

6. Troubleshooting

7. Specifications

8. Warranty & Support

For detailed warranty information and technical support, please refer to the official Godox website or contact their customer service. This product includes a user manual for comprehensive guidance.

You can also visit the GODOX Store on Amazon for additional product information and accessories.