PDP Gaming Faceoff Deluxe+ Wired Switch Pro Controller Instruction Manual

Introduction

This manual provides instructions for the setup, operation, and maintenance of your PDP Gaming Faceoff Deluxe+ Wired Switch Pro Controller. This controller is officially licensed by Nintendo and designed for use with Nintendo Switch, Switch Lite, and Switch OLED consoles. It features customizable buttons, audio capabilities, and a wired connection for reliable performance.

Image: The PDP Gaming Faceoff Deluxe+ Wired Switch Pro Controller, highlighting its official Nintendo licensing.

Package Contents

• PDP Gaming Faceoff Deluxe+ Wired Switch Pro Controller
• 10-foot Detachable USB Cable

Setup

Connecting to Nintendo Switch

1. Ensure your Nintendo Switch console is docked or connected to a power source.
2. Connect the USB-A end of the detachable USB cable to an available USB port on the Nintendo Switch dock.
3. Connect the micro-USB end of the cable to the port on the top of the PDP Gaming Faceoff Deluxe+ Controller.
4. The controller will automatically be recognized by the Nintendo Switch system.

Image: Top-down view of the PDP Gaming Faceoff Deluxe+ Wired Switch Pro Controller, showing its buttons and analog sticks.

Operating Instructions

Audio Features

The controller includes a 3.5mm audio jack located at the bottom. Plug your headset into this jack to enable in-game audio for all compatible games and USB chat for supported titles. This allows for private listening and communication during gameplay.

Image: A user connecting a headset to the 3.5mm audio jack on the controller.

Adjusting Audio Volume

You can adjust the audio volume directly from the controller. While holding the Function button (located below the right analog stick), press the Up or Down directions on the D-pad to increase or decrease the headset volume independently from the Switch system volume.

Image: Detail of the D-pad and Function button, indicating their use for audio control.

Customizable Paddle Buttons

The controller features dual programmable paddle-style buttons on the back. These buttons can be remapped to other controller inputs to enhance gameplay and provide quicker reactions. Refer to the controller's specific programming instructions for detailed remapping steps.

Image: The back of the controller, highlighting the two programmable paddle buttons.

Interchangeable Faceplates

The controller features an interchangeable design, allowing you to swap out and snap in different Faceoff faceplates (sold separately) to customize its appearance.

Dual Vibration

The controller provides dual vibration feedback, enhancing immersion during gameplay by providing tactile responses to in-game events.

Maintenance

• To clean the controller, use a soft, dry cloth. Do not use liquid cleaners or solvents.
• Avoid exposing the controller to extreme temperatures or direct sunlight.
• Store the controller in a clean, dry place when not in use.
• Do not attempt to disassemble the controller, as this may void the warranty.

Troubleshooting

• Controller not recognized by Switch: Ensure the USB cable is securely connected to both the controller and the Nintendo Switch dock. Try a different USB port on the dock.
• No audio through headset: Verify that your headset is fully plugged into the 3.5mm jack. Check the volume settings on the controller using the D-pad and the overall audio settings on your Nintendo Switch. Some games or applications may have specific audio chat configurations.
• Microphone not working: Confirm your headset's microphone is functional. Check in-game or system settings for microphone input and ensure it is enabled. Note that some games may have specific requirements or limitations for USB chat.
• Accidental paddle button presses: If you are accidentally pressing the back paddle buttons, you can remap them to an unused input or effectively disable them by mapping them to themselves, if the controller's software allows.
• Controller feels unresponsive: Ensure the USB cable is not damaged and is securely connected. A wired connection minimizes latency.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the official PDP website or contact PDP customer service directly. Keep your proof of purchase for warranty claims.