1. Product Overview
This ReadyWired power cord cable is designed to provide electrical power to compatible Sony CFD series devices. It features a standard two-prong AC wall plug on one end and a two-slot non-polarized connector on the other, commonly known as an IEC C7 connector. The cable measures 6 feet in length, offering flexibility in device placement.
Key Features:
- Compatibility: Guaranteed for specified Sony CFD models.
- Length: 6 feet (approximately 1.83 meters).
- Connector Type: NEMA 1-15P (US standard 2-prong) to IEC C7 (figure-8) connector.
Figure 1: The ReadyWired power cord, showing the coiled cable, the standard two-prong wall plug, and the two-slot device connector.
2. Setup and Connection
Follow these steps to properly connect your ReadyWired power cord to your Sony CFD device and a power outlet.
- Identify the Power Input: Locate the power input port on your Sony CFD device. This port is typically a two-slot, figure-8 shape.
- Connect to Device: Insert the figure-8 end of the ReadyWired power cord firmly into the power input port of your Sony CFD device. Ensure a snug fit.
- Connect to Power Outlet: Plug the two-prong end of the ReadyWired power cord into a standard AC wall outlet (120V, 60Hz in North America).
- Verify Power: Once connected, your device should receive power. Check for any power indicator lights on your Sony CFD unit.
Important Note: Ensure the power cord's device connector matches the shape of your device's power input. Some Sony CFD-V177 models may have a power input with one flat side and one rounded side, which this cord is not designed for. Verify your device's port before connecting.
3. Operating Instructions
The ReadyWired power cord functions as a direct power supply for your compatible Sony CFD device. Once properly connected to both the device and a live electrical outlet, it continuously supplies power. There are no operational controls on the cord itself.
- To power on/off your device, use the power controls located on the Sony CFD unit itself.
- To disconnect power, unplug the cord from the wall outlet first, then from the device.
4. Maintenance and Care
Proper care of your power cord ensures longevity and safe operation.
- Storage: When not in use, coil the cable loosely. Avoid tight coiling or kinking, which can damage internal wires.
- Cleaning: Wipe the cord with a dry, soft cloth if it becomes dusty. Do not use liquid cleaners directly on the cord or connectors.
- Handling: Always grasp the plug housing when inserting or removing the cord from an outlet or device. Do not pull on the cable itself.
- Inspection: Periodically inspect the cord for any signs of damage, such as cuts, fraying, or bent prongs. Discontinue use immediately if damage is observed.
5. Troubleshooting
If you encounter issues with your ReadyWired power cord, refer to the following common solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. |
|
|
| Cord feels loose in the device port. |
|
|
| Visible damage to the cord. | Physical damage. | Immediately discontinue use and replace the cord. Do not attempt to repair damaged power cords. |
6. Specifications
Technical details for the ReadyWired Power Cord Cable.
- Brand: ReadyWired
- Color: Black
- Length: 6 Feet (1.83 meters)
- Connector Gender: Male-to-Male (referring to the plug and receptacle ends)
- Plug Format: Type A (NEMA 1-15P, 2-prong US standard)
- Device Connector: IEC C7 (Figure-8)
- Item Weight: Approximately 2.39 ounces (67.7 grams)
- Package Dimensions: 6.2 x 2.1 x 0.9 inches (15.7 x 5.3 x 2.3 cm)
- UL Listed: No
7. Warranty and Support
ReadyWired guarantees compatibility for the listed Sony CFD models. For specific warranty details or support inquiries, please refer to the seller's information at the point of purchase or contact ReadyWired directly through their official channels. This product is from a small business brand.
Note: Always ensure you are purchasing from authorized sellers to ensure product authenticity and eligibility for support.