Bronsun Eyelash & Eyebrow Dye User Manual

1. Introduction

The Bronsun gel dye is formulated to create graphic and voluminous eyebrows, suitable for various hair types and eyebrow conditions. It provides intensive tinting to the skin, mimicking the effect of henna, while also gently tinting eyebrow hairs. This product is ammonia-free, making it gentle for use.

2. Product Contents

Each Bronsun Eyelash & Eyebrow Dye kit includes the following components:

• Dye for eyelashes and eyebrows (7ml)
• Milk cream developer (5ml)
• Plastic measuring cup
• Microbrush
• Instruction leaflet

Image: Bronsun Eyelash & Eyebrow Dye kit showing the dye tube, developer bottle, mixing cup, and application brush.

3. Safety Information

Before using this product, it is crucial to read and understand all safety warnings. This product contains ingredients that may cause skin irritation on certain individuals, and a preliminary patch test according to accompanying directions should first be made. Do not use to dye eyelashes or eyebrows if:

• You have a rash on your face or sensitive, irritated, or damaged scalp.
• You have ever experienced any reaction after dyeing your hair or eyelashes/eyebrows.
• You have experienced a reaction to a temporary 'black henna' tattoo in the past.

Patch Test: Apply a small amount of the mixed dye to a clean area of skin, such as behind the ear or on the inner forearm, 48 hours before full application. Observe for any redness, itching, or irritation. If any reaction occurs, do not use the product.

Avoid contact with eyes. If product gets into eyes, rinse immediately with plenty of water. Keep out of reach of children. For external use only. Professional use is recommended.

4. Setup and Preparation

1. Cleanse the eyebrow and eyelash area thoroughly to remove any makeup, oils, or residues.
2. Map your brows to the desired shape using a brow pencil or string method.
3. In the plastic measuring cup, mix a pea-sized amount of Bronsun tint with the milk cream developer. Stir until a homogeneous consistency is achieved.
4. Allow the mixture to stand for one minute before application.

5. Operating Instructions (Application)

Follow these steps for optimal application:

1. Using the provided microbrush or a MicroArtistry Academy Angled brow brush, apply a very thin layer of the mixed dye from the front/head of the brow towards the tail. Ensure even coverage.
2. Allow the first layer to dry slightly.
3. Apply a second thin layer, working from the tail upwards to ensure full saturation.
4. After approximately 5 minutes, gently remove the product from the front/head of the brows to check for desired saturation. Reapply if a darker shade is desired.
5. Allow the dye to process for a total of up to 15 minutes, depending on the desired intensity.
6. After the processing time, remove the product completely using a damp cotton pad or cloth.

Color Mixing Suggestions:

• Light brown + Graphite: Recommended for individuals with light hair and warm undertones.
• Chestnut + Graphite: Ideal for covering old tattooed brows.
• Chestnut + Dark brown: Suitable for individuals with dark skin and light brown hair.
• Brown + Chestnut: For those desiring a more intense color.
• Light brown + Dark brown: Creates a neutral light brown shade.
• Light brown + Chestnut: Best for individuals with light brown hair.
• Add Graphite #2: To cool down any color mixture.

6. Maintenance and Storage

To ensure the longevity and effectiveness of your Bronsun dye products:

• Store all components in a cool, dry place, away from direct sunlight and extreme temperatures.
• Ensure all caps and lids are tightly sealed after each use to prevent air exposure and product degradation.
• Clean the mixing cup and microbrush thoroughly after each use.

7. Troubleshooting

• Dye not lasting as long as expected: Ensure proper preparation of the skin (clean and oil-free). Verify that the dye and developer are mixed thoroughly and allowed to stand for the recommended time. Application of thin, even layers is crucial for optimal absorption and longevity. Individual skin type and hair porosity can also affect retention.
• Color not as expected: The final color can vary based on natural hair color, skin tone, and processing time. Refer to the color mixing suggestions for guidance. If the color is too light, increase processing time slightly in subsequent applications (after a patch test). If too dark, reduce processing time.
• Skin irritation or allergic reaction: Discontinue use immediately. If you experience itching, redness, swelling, or any discomfort, rinse the area thoroughly with water. Consult a medical professional if symptoms persist. Always perform a patch test 48 hours prior to full application to minimize risk.

8. Specifications

9. Warranty and Support

Specific warranty information for this product is not provided in the general product details. For any product-related inquiries, technical support, or warranty claims, please contact the retailer or the manufacturer, Innovator Cosmetics, directly through their official customer service channels. Retain your proof of purchase for any potential claims.