1. Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your new Fetcus Remote Control. This remote is specifically designed as a replacement or spare for various OSIM iMedic Massage Chair models, including OS-757IV, OS-757, OS-777, FMC-150, and FMC-900.
Please read this manual thoroughly before using the remote control to ensure proper function and longevity of the device.
2. Setup
The Fetcus Remote Control is a wired device designed for direct connection to your compatible OSIM massage chair. No batteries are required for its operation.
2.1 Unpacking
Carefully remove the remote control from its packaging. Inspect the remote and its cable for any signs of damage. The package typically includes the remote control unit with its integrated cable.
2.2 Connecting the Remote Control
- Locate the remote control port on your OSIM iMedic Massage Chair. This port is typically found on the side or front of the chair.
- Align the connector at the end of the remote control's cable with the chair's port.
- Gently push the connector into the port until it is securely seated. Do not force the connection.
- Ensure the cable is not kinked or pinched, which could damage the wiring.
Figure 2.1: The Fetcus Remote Control with its integrated connection cable.
3. Operating Instructions
The remote control features a clear display and intuitively organized buttons for easy operation of your massage chair's functions. Familiarize yourself with the button layout before use.
Figure 3.1: The Fetcus Remote Control with its protective flap open, revealing advanced control options.
3.1 Basic Controls
- POWER: Press to turn the massage chair on or off.
- FOOTREST UP/DOWN: Adjusts the position of the footrest.
- RECLINING UP/DOWN: Adjusts the recline angle of the chair back.
3.2 Healthcare Programs
Select from a range of pre-programmed massage routines designed for specific therapeutic benefits. Press the corresponding numbered button (1-5) to activate a program:
- 1. FULL BODY RELIEF: A comprehensive massage targeting the entire body.
- 2. STIFF SHOULDERS: Focuses on relieving tension in the shoulder area.
- 3. LOWER BACK TENSION: Targets the lower back for pain and tension relief.
- 4. LEGS & HIPS FATIGUE: Designed to alleviate fatigue in the legs and hips.
- 5. ACUPRESSURE: Applies pressure to specific points for therapeutic effects.
3.3 Well-Being Programs
These programs are tailored for different times of the day or specific states of relaxation:
- MORNING: An invigorating program to start your day.
- NIGHT: A relaxing program to prepare for sleep.
- SEAT: Focuses massage on the seat area.
3.4 Manual Selection Mode (Under Flap)
Lift the protective flap on the remote to access advanced manual controls for customized massage experiences:
- Massage Types: Select specific massage techniques such as Kneading, Tapping, Rolling, Dual, or Rhythmic Acupressure.
- Intensity Adjustment: Use the UP/DOWN buttons to increase or decrease the massage intensity.
- Speed Adjustment: Adjust the speed of the massage rollers (Fast/Slow).
- Width Adjustment: Modify the width of the massage rollers to target different areas (Narrow, Medium, Wide).
- Lower Body Focus: Select specific lower body areas for massage: Legs, Seat, or Legs & Seat combined.
4. Maintenance
Proper care and maintenance will ensure the longevity and optimal performance of your remote control.
4.1 Cleaning
To clean the remote control, use a soft, dry cloth. For stubborn marks, lightly dampen the cloth with water. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the surface and internal components. The manufacturer recommends to "Wipe Clean" the product.
4.2 Storage
When not in use, store the remote control in a safe place where it will not be subjected to extreme temperatures, direct sunlight, or excessive moisture. Avoid placing heavy objects on the remote or tangling its cable.
Figure 4.1: Rear view of the Fetcus Remote Control, showing its durable casing.
5. Troubleshooting
If you experience issues with your remote control, please refer to the following common troubleshooting steps:
- Remote Not Responding: Ensure the remote control's cable is securely plugged into the massage chair's port. Check for any visible damage to the cable or connector.
- Intermittent Function: Verify that the cable connection is stable and not loose. Avoid bending the cable sharply.
- Display Issues: If the remote's display is not functioning, ensure the chair is powered on and the remote is correctly connected.
If the problem persists after performing these checks, please contact the seller or manufacturer for further assistance.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | OS-757IV |
| Brand | Calvas (Manufacturer: Fetcus) |
| Compatible Models | OSIM iMedic Chair OS-757IV, OS-757, OS-777, FMC-150, FMC-900 Massage Chairs |
| Wireless Communication | Infrared (IR) |
| Channel | 4 |
| Frequency | 433 MHz |
| Item Weight | Approx. 99.79 g (3.52 oz) |
| Material Type | Other (Plastic) |
| Power Source | Wired (No batteries included/required) |
7. Warranty and Support
Specific warranty information for this product may vary. Please refer to the product listing or contact your point of purchase (seller) for details regarding warranty coverage and return policies.
For technical support or further inquiries, please reach out to the seller or the manufacturer, Fetcus, directly. Ensure you have your product model number (OS-757IV) and purchase details ready when contacting support.
