DRELD Replacement RTD Temperature Probe Sensor User Manual

1. Introduction and Overview

This manual provides comprehensive instructions for the DRELD Replacement RTD Temperature Probe Sensor. This high-quality sensor is designed to accurately monitor temperatures in your wood pellet grill, ensuring optimal cooking results. It serves as a direct replacement part for compatible Pit Boss models.

Image 1.1: The DRELD Replacement RTD Temperature Probe Sensor, showing the probe and connecting wires.

2. Product Features

• Compatibility: Specifically designed for Pit Boss 700 and 820 series wood pellet grills with digital control meat probe capability. Please verify your grill's spade connector style before purchase.
• Durable Construction: Made from waterproof and healthy materials, ensuring longevity and safe use with food.
• High Accuracy: Built and tested to strict quality control standards, exceeding OEM requirements for reliable temperature readings.
• Easy Installation: Can be easily spliced to thermostat leads without the need for special tools.
• Optimal Dimensions: Features a 3.5-inch (10.5 cm) internal grill sensor and 23-inch (60 cm) heat-woven wires for flexible placement.
• Thin Probe Tip: Designed with an extra-thin tip to leave a smaller puncture hole when sampling food temperatures.
• Versatile Use: Suitable for monitoring both meat temperature and ambient (smoker/grill) temperature.

Image 2.1: Detailed view of the probe sensor components, highlighting the quality of materials used.

3. Compatibility

The DRELD Replacement RTD Temperature Probe Sensor is compatible with the following models:

• All Pit Boss 700 series wood pellet grills.
• All Pit Boss 820 series wood pellet grills.

Important Note:

Ensure your grill has digital control meat probe capability and verify the spade connector style matches the sensor's connector before installation.

Image 3.1: Visual representation of the probe's compatibility with Pit Boss 700 and 820 series grills.

4. Specifications

Image 4.1: Diagram illustrating the key dimensions of the temperature probe sensor.

5. Setup and Installation

Follow these steps to install your new DRELD RTD Temperature Probe Sensor:

1. Power Off Grill: Ensure your Pit Boss pellet grill is completely powered off and unplugged from the electrical outlet before beginning installation.
2. Locate Existing Probe: Identify the location of the existing RTD temperature probe within your grill.
3. Disconnect Old Probe: Carefully disconnect the old probe from its thermostat leads. Note the spade connector style for reference.
4. Insert New Probe: Insert the new DRELD probe into the designated opening in your grill.
5. Connect Wires: Easily splice the new probe's wires to the thermostat leads. No special tools are typically required for this connection. Ensure a secure connection.
6. Secure Probe (if applicable): If your grill model requires it, secure the probe using any existing mounting hardware. (Note: Screws and nuts are not included with this replacement part).
7. Verify Connection: Double-check all connections to ensure they are firm and correctly aligned.
8. Power On Grill: Plug in and power on your grill. The digital display should now register temperature readings from the new probe.

Safety Precaution:

Always ensure the grill is cool and unplugged before handling internal components.

Image 5.1: Emphasizing the importance of checking the connector style for proper installation.

6. Operation

Once installed, the DRELD RTD Temperature Probe Sensor operates in conjunction with your grill's digital control system to provide accurate temperature readings.

• Monitoring Grill Temperature: The probe continuously monitors the ambient temperature inside your grill, allowing the grill's controller to maintain the set cooking temperature.
• Monitoring Food Temperature: For precise cooking, insert the thin tip of the probe into the thickest part of the food, avoiding bone. The internal food temperature will be displayed on your grill's control panel, enabling you to cook to desired doneness.

Image 6.1: The probe sensor can be used for both BBQ and food temperature monitoring, highlighting its utility.

7. Maintenance

Proper care and maintenance will extend the life of your temperature probe sensor:

• Cleaning: The tip of the probe tube can be cleaned by running it under a faucet or wiping it with a damp rag. Avoid submerging the entire probe or the wire connections in water.
• Storage: When not in use, store the probe in a clean, dry place to prevent damage.
• Inspection: Periodically inspect the probe and its wires for any signs of wear, kinks, or damage.

Product Care Instructions: Wipe Clean.

8. Troubleshooting

If you experience issues with your DRELD RTD Temperature Probe Sensor, consider the following:

• Inaccurate Readings: Ensure the probe is fully inserted into the grill or food. Check for any kinks or damage in the wire that might affect conductivity.
• No Reading/Error Message: Verify that the probe is securely connected to the grill's thermostat leads. Ensure the spade connectors are properly seated. If the issue persists, the probe may have failed.

If the probe sensor fails or you are unable to resolve an issue, please refer to the Warranty and Support section for assistance.

9. Warranty and Support

The DRELD Replacement RTD Temperature Probe Sensor comes with a One-year Warranty from the date of purchase.

If your probe sensor fails within the warranty period, or if you encounter any issues that cannot be resolved through troubleshooting, please contact DRELD customer support for assistance. We are committed to providing replacements or refunds for defective products.

For support, please visit the DRELD store on Amazon or contact us directly through the platform where you made your purchase.

Visit the Official DRELD Store on Amazon