KETOSCAN V2 Mini Breath Ketone Meter Instruction Manual

1. Product Overview

The KETOSCAN V2 Mini is a portable breath acetone analyzer designed to measure ketone levels and calculate body fat burning rates from your exhaled breath. This non-invasive device provides real-time data to help you monitor your progress on low-carb, ketogenic, or any nutrition and fitness program.

• Non-Invasive: No finger pricking required.
• Mobile App Connectivity: Record and monitor acetone levels, weight, and track calories.
• PPM Results: Displays results in Parts Per Million (PPM) on the device and in the mobile app.
• Body Fat Burning Rate: Helps determine optimal ketosis state and fat burning efficiency.

Image 1: KETOSCAN V2 Mini Breath Ketone Meter in use. A person is shown using the device to track ketosis, with accompanying icons illustrating features like fat decomposition tracking, app synchronization, and sensor test cycles.

2. Setup

2.1. Download the KETOSCAN App

For enhanced functionality and easy recording of your test results, download the KETOSCAN Mini mobile app. It is available on both the App Store and Google Play.

2.2. Device Pairing

1. Enable Bluetooth on your smartphone.
2. Open the KETOSCAN Mini app.
3. Press and hold the power button on the KETOSCAN Mini unit for 2 seconds to turn it on.
4. In the app, select "KETOSCAN Mini" from the list of available Bluetooth devices to complete pairing.
5. Ensure location services (GPS) are enabled on your smartphone and allow location sharing for proper app functionality.

2.3. Prepare for Testing

Extend the built-in mouthpiece. If you are the only user, you can use the built-in mouthpiece. For multiple users, it is recommended that each person use a disposable mouthpiece (available separately). Clean the mouthpiece with a new cotton swab or cloth. Do not use alcohol to clean the mouthpiece as it may interfere with the sensor.

3. Operating Instructions

3.1. Self-Diagnostic Test

The KETOSCAN Mini performs a patented self-diagnostic test to adjust the sensor's baseline using your exhaled breath, ensuring test accuracy. This test does not count towards the sensor's 300-test limit. The device may perform this test frequently, even for each test, which is normal for a sensitive medical device.

For accurate results, avoid the following situations for at least 30 minutes before testing:

• Brushing teeth or using mouthwash.
• Consuming candy or gum.
• Smoking.
• Eating food.
• Drinking coffee, tea, or any beverage other than water.

Additionally, avoid testing if you have consumed a lot of alcohol in the past 24 hours, or if you are testing the morning after heavy drinking, as this may affect test results.

3.2. Main Test

1. After successful pairing and self-diagnostic mode completion, the app will prompt you to analyze your breath.
2. Take a small, normal breath.
3. Gently blow into the mouthpiece for 3 seconds. The app will display an indicator bar to guide you.
4. When the indicator bar reaches the top, stop blowing. Excessive blowing can lead to abnormally high readings.
5. If the sample was obtained correctly, the unit will beep twice and the app will vibrate to confirm.

3.3. Tips for Accurate Readings

• Environment: Avoid testing in environments with strong smells or gases (e.g., kitchen during cooking, bathroom after using aerosols). Keep the device in a clean, neutral environment.
• Breath Technique: Always take a normal, shallow breath before blowing. Maintain a consistent blowing force for each test to ensure comparable results. Avoid holding your breath for extended periods before blowing, as this can increase acetone concentration.

4. Understanding Your Results

The KETOSCAN Mini displays your breath acetone concentration in Parts Per Million (PPM) on both the device's built-in white dot matrix display and the mobile app. The app also provides your approximate body fat burning rate and a brief comment about your ketosis level.

Image 2: KETOSCAN Level Guide. This chart explains the different breath acetone concentration levels (PPM) and their corresponding ketosis states and body fat burning rates.

4.1. App Features for Data Tracking

The KETOSCAN app allows you to:

• Record and monitor your acetone levels and weight daily, weekly, and monthly.
• Track your calories with photos of food consumed and note calories burned from exercise.
• Sync data with Apple Health and Google Fit.
• Set test reminders.
• Share your data via email with your doctor or health coach.
• Add friends to compare results and motivate each other.

5. Maintenance

5.1. Mouthpiece Cleaning

If you are the sole user of the device, you can clean the built-in mouthpiece with a new cotton swab or cloth. For hygiene, consider replacing the mouthpiece periodically or using disposable mouthpieces if sharing the device.

5.2. Sensor Replacement and Recalibration

To maintain optimal precision, the KETOSCAN Mini's sensor requires replacement and recalibration after 300 test cycles or 12 months, whichever comes first. The unit will lock after 300 tests, requiring you to send it back to the company for sensor replacement and recalibration. This service typically costs around $30.

Image 3: KETOSCAN Mini Precise Sensor. This image highlights the device's sensor, which is crucial for accurate readings and requires periodic maintenance.

6. Troubleshooting

If you experience inconsistent readings or frequent self-diagnostic mode prompts, consider the following:

• Environmental Interference: Ensure you are testing in a clean environment free from strong odors, gases, or aerosols (e.g., avoid kitchens during cooking or bathrooms after using hairspray).
• Breath Technique: Maintain a consistent and normal breath when blowing into the device. Avoid deep breaths or holding your breath before testing, as this can skew results.
• Sensor Accuracy: If readings remain inconsistent despite following guidelines, the sensor may require recalibration or replacement. Contact customer support for assistance.

7. Specifications

• Brand: KETOSCAN
• Model Name: KETOSCAN Mini
• Product Dimensions: 2.12"L x 0.72"W x 4.33"H
• Item Weight: 74 Grams
• Battery Cell Composition: Lithium Ion
• Manufacturer: SENTECH USA INC
• UPC: 804030731909, 804030731862

8. Warranty and Support

The KETOSCAN Mini is manufactured by SENTECH USA INC. For any product inquiries, technical support, or sensor recalibration services, please contact the manufacturer directly. Information regarding warranty coverage and service center details can typically be found in the user manual included with your device or on the official KETOSCAN website.

As noted in the maintenance section, sensor recalibration is required after 300 tests or 12 months, with a service fee of approximately $30.