1. Introduction
Thank you for purchasing the JAPANNEXT JN-3275-JRSA Mobile TV Stand. This stand is designed to provide a versatile and stable mounting solution for LCD TVs and PC monitors ranging from 32 to 65 inches. It features height adjustment, tilt functionality, and locking casters for easy mobility. Please read this manual thoroughly before assembly and use to ensure proper installation and safe operation.
2. Safety Information
- Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or faulty.
- This stand is designed for monitors and TVs between 32 and 65 inches, with a maximum load capacity of 50 kg. Do not exceed this weight limit.
- For safety reasons, it is not recommended to adjust the height of the stand with a monitor installed. Always remove the monitor before making height adjustments.
- The top plate (shelf) can only be attached when a monitor of 55 inches or less is installed. If your monitor is larger than 55 inches, do not attach the top plate.
- Ensure all screws are securely tightened during assembly. Loose connections can lead to instability.
- Always engage the locks on the casters when the stand is in a stationary position to prevent accidental movement.
- Keep children and pets away from the stand during assembly and when moving it.
3. Package Contents
Please verify that all the following parts are included in your package:
- Main stand frame components (vertical poles, base, mounting bracket)
- Casters (with locks)
- Shelf/Table component
- Hardware kit (screws, washers, nuts, Allen wrench, etc.)
- Instruction Manual
4. Assembly and Setup
Follow these steps carefully to assemble your JAPANNEXT JN-3275-JRSA Mobile TV Stand.
4.1. Attaching the Casters to the Base
Attach the casters to the base of the stand. Ensure that at least two of the casters with locking mechanisms are installed on the front side for stability.
4.2. Assembling the Vertical Poles
Connect the vertical pole sections according to the diagrams in the included assembly guide. Secure them firmly with the provided screws.
4.3. Attaching the Monitor Mounting Bracket
Secure the VESA mounting bracket to the vertical poles. This stand supports VESA patterns including 100x100mm, 200x100mm, 200x200mm, 300x300mm, 400x200mm, and 600x400mm.
Image: Detail of the VESA mounting bracket, showing various screw hole patterns for monitor attachment.
4.4. Installing the Shelf/Table
Attach the shelf to the desired height on the vertical poles. This shelf can be used to hold media players, laptops, or other accessories.
Image: The mobile TV stand featuring an adjustable shelf for additional equipment.
4.5. Mounting Your Monitor/TV
Carefully attach your monitor or TV to the VESA mounting bracket using the appropriate screws from the hardware kit. Ensure the monitor is centered and securely fastened.
Image: The JAPANNEXT JN-3275-JRSA mobile TV stand, fully assembled and ready for a monitor.
5. Operation
5.1. Moving the Stand
To move the stand, unlock the casters by flipping their levers. Gently push the stand to your desired location. Once in position, engage the caster locks to prevent unintended movement.
Image: Close-up of the stand's casters, highlighting the locking mechanism for secure positioning.
5.2. Adjusting Height
The stand offers 4 levels of height adjustment. To adjust the height, first remove the monitor from the mounting bracket. Then, loosen the securing bolts on the vertical poles, adjust to the desired height, and re-tighten the bolts firmly. Reattach the monitor.
5.3. Adjusting Tilt Angle
The monitor mounting bracket allows for a tilt adjustment of +5° to -12°. Loosen the tilt adjustment knobs on the side of the bracket, set the monitor to your preferred viewing angle, and then re-tighten the knobs to secure the position.
6. Maintenance
- Regularly check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
- Clean the stand with a soft, dry cloth. Avoid abrasive cleaners or solvents that may damage the finish.
- Inspect casters periodically for smooth operation and ensure locks are functioning correctly.
7. Troubleshooting
7.1. Stand is unstable or wobbly
- Ensure all assembly screws are fully tightened.
- Verify that the monitor weight does not exceed the 50 kg load capacity.
- Check that the monitor is properly centered on the mounting bracket.
7.2. Casters do not move smoothly or lock properly
- Clean any debris from the caster wheels.
- Ensure the locking mechanism is fully engaged or disengaged.
7.3. Difficulty adjusting height or tilt
- For height adjustment, ensure the monitor is removed before attempting to change the height.
- Ensure all adjustment knobs/bolts are sufficiently loosened before attempting to move the components.
8. Specifications
Image: Detailed diagram showing the dimensions of the JAPANNEXT JN-3275-JRSA mobile TV stand.
| Feature | Description |
|---|---|
| Model Number | JN-3275-JRSA |
| Brand | JAPANNEXT |
| Mounting Type | Tabletop Mount |
| Movement Type | Tiltable |
| Material | Alloy Steel |
| Color | Black |
| Compatible Monitor Sizes | 32 - 65 inches |
| VESA Compatibility | 100x100mm, 200x100mm, 200x200mm, 300x300mm, 400x200mm, 600x400mm |
| Load Capacity | 50 kg |
| Tilt Angle | +5° to -12° |
| Height Adjustment | 4 levels |
| Product Weight | 10 kg |
| Country of Origin | China |
9. Warranty and Support
9.1. Warranty Information
This JAPANNEXT product is covered by a 2-year warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
9.2. Customer Support
If you encounter any issues with your JAPANNEXT JN-3275-JRSA Mobile TV Stand or have questions not covered in this manual, please contact JAPANNEXT customer support. Please have your model number and proof of purchase ready when contacting support.
For the latest support information and contact details, please visit the official JAPANNEXT website or refer to the contact information provided with your purchase.