Chromadent Dental Dentamerica LITEX 686 LED Whitening & Curing System

1. Product Overview

The Litex 686 LED Bleaching And Curing Light is an advanced LED-based system designed for both composite curing and professional tooth whitening procedures. Its streamlined design allows for direct mounting to a dental unit, optimizing space within the operatory. Featuring a user-friendly control panel, the system offers easy access to its curing and whitening functions. It supports a fully customizable single-visit bleaching procedure when used with the Everbrite Tooth Whitening Kit and LED Whitening Arch.

The system incorporates a Soft-Start Ramping function to effectively prevent shrinkage of composite materials during polymerization. With high LED light intensity, it can cure a depth of 4mm in just 3 seconds. Designed for longevity and cost-effectiveness, the LED has an impressive life expectancy of 50,000 hours, eliminating the need for frequent bulb replacements. The LED Whitening Arch is specifically designed to whiten the entire anterior area of the patient’s mouth. Both the LED Probe and LED Whitening Arch are magnetically held and can be easily rotated 360° for optimal positioning. Operation is further simplified by a one-touch magnetic handpiece trigger ring. An optional bleaching stand with a 3-section bleaching arm and rotatable trays is available for enhanced versatility.

Figure 1.1: The Litex 686 LED Whitening and Curing System, shown with its optional mobile stand, illustrating its compact and ergonomic design.

2. Key Features

• High Intensity LED: Provides light output comparable to a plasma arc, with intensity up to 2,000mW/cm².
• Rapid Curing: Achieves a curing depth of 4mm in only 3 seconds.
• Soft-Start Ramping Function: Prevents shrinkage stress in composite materials by initiating polymerization with lower intensity.
• Long LED Life: Cost-effective operation with an LED lifespan of approximately 50,000 hours, eliminating bulb replacements.
• Versatile Whitening: LED Whitening Arch designed to whiten the entire anterior area of the patient's mouth.
• Magnetic Handpieces: LED Probe and LED Whitening Arch are magnetically held and can be rotated 360° for precise positioning.
• User-Friendly Control: Features a one-touch magnetic handpiece trigger ring and an intuitive control panel.
• Space-Saving Design: Streamlined unit directly mounts to dental units.
• Optional Bleaching Stand: Available with a 3-section flexible arm and rotatable trays for enhanced mobility and positioning.

3. Components and Accessories

The Litex 686 LED system comes with the following components and may include optional accessories:

• Litex 686 LED Main Unit
• LED Whitening Arch
• LED Probe
• Handpiece Cable / Fingertip Activator Ring
• Everbrite In-Office Tooth Whitening Kit
• Eye Protection Glasses
• Whitening Strip

Figure 3.1: Key components of the Litex 686 system, including the LED Whitening Arch, LED Probe, Handpiece Cable, Everbrite In-Office Tooth Whitening Kit, and Eye Protection Glasses.

4. Setup Instructions

Follow these steps to set up your Litex 686 LED Whitening & Curing System:

1. Mounting the Unit: The Litex 686 main unit is designed for direct mounting to a dental unit. Securely attach the unit according to your dental unit's specifications, ensuring it is stable and accessible. If using the optional bleaching stand, assemble the stand first, then mount the Litex 686 unit onto its designated arm.
2. Connecting Handpieces: Connect the LED Whitening Arch and the LED Probe to their respective magnetic ports on the main unit. Ensure a firm connection.
3. Connecting Handpiece Cable: Attach the handpiece cable with the fingertip activator ring to the appropriate port on the main unit.
4. Power Connection: Connect the power cord to the main unit and then plug it into a grounded electrical outlet. Ensure the power supply matches the unit's requirements.
5. Initial Check: Before first use, perform a visual inspection of all connections and ensure the unit is securely mounted.

5. Operating Instructions

The Litex 686 features a user-friendly control panel for easy operation:

Figure 5.1: The control panel of the Litex 686, displaying the digital timer and mode selection buttons, alongside the LED handpiece.

1. Power On/Off: Press the power button on the control panel to turn the unit on. The display will illuminate. Press again to turn off.
2. Mode Selection: Use the mode selection buttons (typically indicated by icons for curing or whitening) to choose the desired function.
3. Time Adjustment: Adjust the treatment time using the designated up/down arrows or rotary dial on the control panel. The display will show the selected time (e.g., '40' for 40 seconds).
4. Positioning: For curing, position the LED Probe directly over the composite material. For whitening, position the LED Whitening Arch to cover the anterior teeth. Both can be rotated 360° for optimal angle.
5. Initiating Treatment: Press the one-touch magnetic handpiece trigger ring to begin the light emission. The Soft-Start Ramping function will initiate the curing process with a lower intensity before reaching full power.
6. Monitoring: The display will count down the remaining treatment time. The unit will typically emit an audible signal upon completion.
7. Emergency Stop: In case of an emergency, release the trigger ring or press the power button to immediately stop light emission.

6. Maintenance and Care

Proper maintenance ensures the longevity and optimal performance of your Litex 686 system:

• Cleaning: After each use, wipe down the exterior surfaces of the unit, handpieces, and cables with a soft cloth dampened with a mild, non-abrasive disinfectant solution. Do not immerse any part of the unit in liquid.
• Disinfection: Follow standard dental practice guidelines for disinfection of all components that come into contact with patients or their environment. Ensure the unit is unplugged before cleaning.
• Storage: Store the unit in a clean, dry environment away from direct sunlight and extreme temperatures. Ensure handpieces are properly secured or placed in their designated holders to prevent damage.
• Cable Inspection: Regularly inspect all cables for any signs of wear, fraying, or damage. Do not use the unit if cables are damaged.
• Optical Surface Care: Keep the LED light emission surfaces of the probe and arch clean and free of debris or cured material, as this can affect light intensity and performance. Use a soft, lint-free cloth.

7. Troubleshooting

If you encounter issues with your Litex 686 system, refer to the following common troubleshooting steps:

If the issue persists after attempting these troubleshooting steps, please contact Chromadent Dental Equipments customer support for further assistance.

8. Technical Specifications

9. Warranty and Support

For warranty information, technical support, or service inquiries regarding your Chromadent Dental Dentamerica LITEX 686 LED Whitening & Curing System, please contact the seller, Chromadent Dental Equipments, or the manufacturer, Dentamerica, directly.

Please have your product model number (LITEX 686 LED WS) and purchase details ready when contacting support to facilitate a quicker resolution.

Manufacturer Contact Information:
Dentamerica
18688 E. San Jose Ave.
City of Industry, CA 91748 U.S.A.
Phone: (626) 913-1388
Fax: (626) 913-0510
Email: info@dentamerica.com
Website: www.dentamerica.com, www.dentamerica.asia