Wagner & Stern UV Toothbrush Sanitizer (Model B200)

Introduction

Thank you for choosing the Wagner & Stern UV Toothbrush Sanitizer, Model B200. This device utilizes advanced UV-C LED technology to sanitize toothbrush heads, promoting better oral hygiene. Its compact, wireless design and rechargeable battery make it suitable for both home and travel use. Please read this manual thoroughly before operating the device to ensure proper use and maintenance.

Image: The Wagner & Stern UV Toothbrush Sanitizer, featuring a vibrant travel-themed pattern on its lid. This compact device is designed for sterilizing toothbrush heads.

Important Safety Information

• Do not look directly at the UV-C light when the device is operating.
• Keep out of reach of children.
• The device is designed to automatically shut off when the cover is opened during a cycle.
• Use only the provided charging cable or a compatible USB charger.
• Do not immerse the device in water or other liquids.
• This product is intended for toothbrush head sanitation only.

Image: A label displaying the EPA Est. No. 98259-CHN-1 and EPA Product Registration No. 98259-DV-2, along with a warning that it is a violation of Federal law to use this product in a manner inconsistent with its labeling.

Setup and Installation

The Wagner & Stern UV Toothbrush Sanitizer can be used freestanding or mounted on a wall. For wall mounting, follow these steps:

1. Step 1: Clean the Surface. Ensure the wall surface where you intend to mount the sanitizer is clean and dry.
2. Step 2: Prepare the Adhesive. Peel off the protective backing from one side of the adhesive pad.
3. Step 3: Attach to Mount. Apply the adhesive pad firmly to the back of the wall mount bracket.
4. Step 4: Prepare Wall Mount. Peel off the remaining protective backing from the adhesive pad on the wall mount bracket.
5. Step 5: Mount to Wall. Press the wall mount bracket firmly onto the cleaned wall surface. Hold for a few seconds to ensure adhesion.
6. Step 6: Attach Sanitizer. Slide the toothbrush sanitizer onto the wall mount bracket until it clicks securely into place.

Image: A visual guide showing six steps for wall-mounting the toothbrush sanitizer. This includes cleaning the surface, applying adhesive to the bracket, and attaching the sanitizer.

The device is completely wireless once charged, allowing for flexible placement around sink vanities or for travel.

Image: The Wagner & Stern UV Toothbrush Sanitizer mounted on a tiled bathroom wall, positioned above a sink. A toothbrush is inserted into the sanitizer.

Operating Instructions

The Wagner & Stern UV Toothbrush Sanitizer is designed for simple and effective operation.

1. Charge the Device: Before first use, fully charge the device using the provided USB cable. The advanced lithium-ion battery provides up to 28 sanitizing cycles on a single charge.
2. Insert Toothbrush Head: After brushing, wipe off any excess water from your toothbrush head. Open the sanitizer's cover and insert the toothbrush head into the designated slot. The sanitizer is compatible with all brush heads, including both adult and kids' toothbrushes.
3. Start Sanitization Cycle: Close the cover and press the power button. The UV-C light will activate, initiating a 6-minute automatic sanitizing cycle.
4. Automatic Shut-off: The device will automatically shut off after the 6-minute cycle is complete. It also features a safety mechanism that automatically shuts off the UV-C light if the cover is opened during operation.

It is recommended to sanitize brush heads once every 3 days for optimal hygiene.

Image: The Wagner & Stern UV Toothbrush Sanitizer demonstrating its compatibility with different kinds of toothbrush heads, including manual and electric brush heads.

Care and Maintenance

• Cleaning: The brush head holder is removable for easy cleaning. Wipe the exterior of the sanitizer with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
• Battery: Recharge the lithium-ion battery as needed. A full charge supports approximately 28 sanitizing cycles.
• Storage: Store the sanitizer in a dry place when not in use.

Troubleshooting

If you encounter any issues with your Wagner & Stern UV Toothbrush Sanitizer, please consider the following:

• Device not turning on: Ensure the device is fully charged. Connect it to a power source using the USB cable and allow it to charge for a few hours.
• UV-C light not activating: Confirm the cover is fully closed and the toothbrush head is properly seated. The safety mechanism prevents activation if the cover is open.
• Reduced battery life: Battery performance can decrease over time. Ensure the device is charged regularly.

If problems persist, please contact customer support for assistance.

Specifications

Warranty and Support

This Wagner UV-C sanitizer includes a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support, warranty inquiries, or any questions regarding your product, please contact Wagner Stern customer service. Refer to the product packaging or the official Wagner Stern website for contact details.