VANCORE Transparent Wall Mounted Phone and Remote Holder

1. Product Overview

The VANCORE Transparent Wall Mounted Phone and Remote Holder is designed to provide a convenient and organized solution for storing your mobile devices and remote controls. Crafted from durable, environmentally friendly acrylic, this holder offers a clear view of its contents, making it easy to locate items. Its minimalist design integrates seamlessly into various home or office environments, helping to reduce clutter and keep essential items within reach.

This holder features three compartments, ideal for accommodating multiple phones, remote controls, or other small electronic devices. A dedicated cable hole at the bottom of each compartment allows for easy charging while devices are stored, preventing tangled cables and maintaining a tidy space.

Image 1.1: The VANCORE Transparent Wall Mounted Holder in use, holding a remote control, a power bank, and a smartphone, demonstrating its organizational capabilities and integrated charging access.

2. Package Contents

Please verify that all items listed below are included in your package. If any components are missing or damaged, please contact customer support.

• 1 x VANCORE Transparent Wall Mounted Phone and Remote Holder (3 Compartments)
• Screws and Nuts (for screw-based installation)
• Double-sided Adhesive Velcro Stickers (for adhesive-based installation)

Image 2.1: Included installation hardware: screws, nuts, and double-sided adhesive velcro stickers, offering flexible mounting options.

3. Setup and Installation

Before installation, please note that the holder comes with a protective film to prevent scratches during transit. This film should be removed before use to reveal the clear acrylic surface.

3.1 Removing Protective Film

1. Carefully locate the edge of the protective film on the acrylic surface.
2. Gently peel off the film from all surfaces of the holder.
3. Discard the film.

3.2 Mounting Options

The holder can be installed using either screws for a more permanent fixture or adhesive velcro stickers for a less invasive option.

Option A: Screw Installation (Recommended for heavier items or long-term use)

1. Choose a suitable wall location, ensuring it is a flat and stable surface.
2. Hold the holder against the wall at the desired height and mark the positions for the screw holes.
3. Drill pilot holes at the marked positions. Use appropriate drill bits for your wall material.
4. Insert the provided nuts (wall anchors) into the drilled holes if necessary.
5. Align the holder's screw holes with the wall holes and secure it using the provided screws. Tighten firmly but do not overtighten.

Option B: Adhesive Velcro Sticker Installation (For lighter items or temporary placement)

1. Ensure the wall surface is clean, dry, and smooth. Wipe away any dust or grease.
2. Peel one side of the protective backing from the double-sided adhesive velcro stickers.
3. Apply the stickers firmly to the designated areas on the back of the holder.
4. Peel the remaining protective backing from the stickers.
5. Press the holder firmly against the desired wall location for at least 30 seconds.
6. Allow the adhesive to cure for 24 hours before placing items in the holder to ensure maximum adhesion.

4. Operating Instructions

The VANCORE holder is designed for straightforward use, providing organized storage and convenient charging access.

4.1 Storing Devices and Remotes

• Place your smartphones, remote controls, or other small electronic devices into the individual compartments. The transparent design allows for easy identification of contents.
• Ensure devices fit securely within the compartments without excessive force.

Image 4.1: The empty holder, illustrating its three distinct compartments ready for use.

4.2 Charging Devices

Each compartment features a cable hole at the bottom, allowing for convenient charging while your device is stored.

1. Place your smartphone or other charge-compatible device into a compartment.
2. Thread your charging cable through the cable hole at the bottom of the compartment.
3. Connect the charging cable to your device and then to a power source.
4. This design helps keep cables tidy and prevents tangling on your desk or nightstand.

Image 4.2: A close-up view demonstrating how a charging cable is routed through the bottom hole of the holder, allowing for convenient device charging.

Image 4.3: This image illustrates the correct way to charge a phone using the holder's integrated cable management, contrasting it with common, less organized charging methods.

5. Maintenance

To ensure the longevity and clear appearance of your VANCORE Transparent Wall Mounted Holder, follow these simple maintenance guidelines:

• Cleaning: Wipe the holder regularly with a soft, damp cloth. For stubborn marks, a mild soap solution can be used. Avoid abrasive cleaners or harsh chemicals, as these can scratch or damage the acrylic surface.
• Dusting: Use a soft, dry cloth or a feather duster to remove dust from the surface.
• Avoid Impact: While durable, acrylic can crack or break under severe impact. Avoid dropping the holder or striking it with hard objects.
• Temperature: Do not expose the holder to extreme temperatures or direct heat sources, as this may cause warping or discoloration.

6. Troubleshooting

This section addresses common questions and minor issues you might encounter with your product.

6.1 Scratches on the Surface

Issue: The holder appears to have scratches upon unboxing.

Solution: The holder is protected by a thin, tearable film during shipping. These apparent scratches are likely on this protective film, not the acrylic itself. Please ensure you have completely removed the protective film from all surfaces before use. Once removed, the acrylic should be clear and scratch-free.

6.2 Holder Not Adhering to Wall (Adhesive Installation)

Issue: The holder falls off the wall when using adhesive stickers.

Solution:

• Ensure the wall surface was thoroughly cleaned and dried before application. Any dust, grease, or moisture can prevent proper adhesion.
• Verify that the surface is smooth and non-porous. Adhesive stickers may not work effectively on textured or uneven surfaces.
• Apply firm pressure for at least 30 seconds when attaching the holder to the wall.
• Allow the adhesive to cure for a full 24 hours before placing any items into the holder. This allows the adhesive to form a strong bond.
• For heavier items or a more secure hold, consider using the screw installation method.

7. Specifications

Image 7.1: Detailed dimensions of the VANCORE Transparent Wall Mounted Holder, indicating length, width, and height for accurate placement.

8. Warranty and Support

Specific warranty details and direct support contact information are not available in the provided product data. For any inquiries regarding warranty claims, product support, or technical assistance, please refer to the seller's information on the platform where the product was purchased or visit the official VANCORE brand store if available.

Please retain your proof of purchase for any warranty-related claims.