1. Product Overview
The KEMIMOTO UTV Cover (Model UC006) is designed to provide all-weather protection for 2-3 seater UTVs. Constructed from durable Oxford cloth with a waterproof PU and UV-resistant coating, this cover safeguards your vehicle from various environmental elements.
Key Features:
- All-Weather Protection: Waterproof, UV-resistant, windproof, snow-proof, dust-proof, and scratch-resistant.
- Secure Fit: Features an elastic hem, one windproof buckle, and four additional straps for wheel fastening to ensure stability in winds up to 40 MPH.
- Enhanced Visibility: Long reflective strips on both sides improve visibility during nighttime parking.
- Medium Size: Dimensions of 124 x 58 x 71 inches, suitable for various 2-3 seater UTV models.
Compatibility: This cover is compatible with models such as Polaris Ranger XP 1000, Mule, Pioneer, Wolverine, CFMOTO UForce, Defender, Massimo, Hisun, Axis, and Coleman UTVs.
Important Note: This cover is not suitable for use during trailer transport.
Image: The KEMIMOTO UTV Cover (Model UC006) draped over a red UTV, providing full coverage. A smaller image of an uncovered black UTV is shown in the bottom right corner for comparison.
2. Setup Instructions
Follow these steps to properly install your KEMIMOTO UTV Cover:
- Unpack the Cover: Carefully remove the UTV cover from its compression bag. Unfold it completely.
- Position the Cover: Drape the cover over your UTV, ensuring it is centered and covers the entire vehicle from front to back and side to side. The reflective strips should be visible on the sides.
- Secure the Elastic Hem: The elastic hem at the bottom of the cover should fit snugly around the base of your UTV. Adjust as needed for a tight fit.
- Fasten the Windproof Buckle: Locate the central windproof buckle and connect it underneath the UTV. Tighten the strap to secure the cover firmly.
- Attach Wheel Straps: Use the four additional straps provided to fasten the cover to each of your UTV's wheels. This provides extra security against strong winds.
Image: A close-up view illustrating the windproof features of the KEMIMOTO UTV Cover, including fastening buckles, extra straps, and holes for fixing to wheels, with wind blowing around a covered UTV.
Image: An illustration showing the dimensions of the KEMIMOTO UTV Cover (126in/320cm length, 70in/180cm width, 75in/190cm height) and how it fits over a UTV, with examples of compatible 2-3 seater UTVs.
3. Operating (Usage)
The KEMIMOTO UTV Cover is designed for straightforward use to protect your vehicle from various elements.
- Daily Protection: Place the cover over your UTV whenever it is parked outdoors for extended periods to shield it from sun, rain, dust, and debris.
- Weather Resistance: The cover's material is engineered to withstand harsh conditions, including heavy rain (water pressure up to 3000 Pa), strong winds (up to 40 MPH when properly secured), and harmful UV rays.
- Nighttime Visibility: The integrated reflective strips on the sides of the cover increase your UTV's visibility to others, especially when parked in low-light conditions, helping to prevent accidental collisions.
- Easy Removal: To remove the cover, unfasten the wheel straps and the central buckle, then lift the cover off the UTV. Fold it neatly for storage.
Image: The KEMIMOTO UTV Cover being subjected to a water pressure test, demonstrating its waterproof capabilities with water beading on the surface and waterproof seam tape visible.
Image: A covered UTV in a grassy field, illustrating the cover's ability to withstand strong winds, highlighting the elastic hem design, 4 lock holes, and adjustable elastic cord.
Image: A UTV covered with the KEMIMOTO cover at night, showcasing the bright reflective strips that enhance visibility in dark conditions.
4. Maintenance
Proper maintenance will extend the life and effectiveness of your UTV cover.
- Cleaning: To clean the cover, wipe it down with a damp cloth. For stubborn dirt, use a mild soap solution and rinse thoroughly with water. Avoid using harsh detergents, bleach, or abrasive cleaners, as these can damage the waterproof coating and fabric.
- Drying: Always ensure the cover is completely dry before folding and storing it. Storing a damp cover can lead to mildew growth and unpleasant odors.
- Storage: When not in use, fold the cover neatly and store it in the provided compression bag. Keep it in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the cover for any signs of wear, tears, or damage, especially along seams and around attachment points. Promptly repair any small damages to prevent them from worsening.
5. Troubleshooting
If you encounter any issues with your KEMIMOTO UTV Cover, refer to the following common problems and solutions:
- Cover not staying on in strong winds:
- Ensure the central windproof buckle is securely fastened and tightened.
- Verify that all four wheel straps are properly attached to the wheels and adjusted for a snug fit.
- Check that the elastic hem is fully encompassing the base of your UTV.
- Water seepage or dampness underneath the cover:
- Inspect the cover for any tears, punctures, or damage to the fabric or seams. Even small holes can allow water to penetrate.
- Confirm the cover is correctly positioned and fully extends over all parts of the UTV, leaving no exposed areas.
- Ensure the cover is not pooling water in any areas, which can stress the fabric.
- Cover does not fit properly:
- Double-check your UTV's dimensions against the cover's specified size (124 x 58 x 71 inches).
- Refer to the compatibility list in the Product Overview section to ensure your UTV model is supported.
If these steps do not resolve your issue, please contact KEMIMOTO customer support for further assistance.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | KEMIMOTO |
| Model | UC006 (UTV Cover 2-3 Seater) |
| Color | Black |
| Material | Oxford Cloth with PU and UV-resistant coating |
| Item Dimensions (L x W x H) | 124 x 58 x 71 inches (315 x 147 x 180 cm) |
| Water Resistance Level | Waterproof (up to 3000 Pa pressure) |
| Wind Resistance | Up to 40 MPH (when properly secured) |
| Coverage | Full coverage (entire UTV) |
| Item Weight | 4.45 pounds (2.02 kg) |
| Automotive Fit Type | Universal Fit (for compatible 2-3 seater UTVs) |
7. Warranty and Support
Information regarding specific warranty terms for the KEMIMOTO UTV Cover (Model UC006) is not provided in this manual. For warranty details, product support, or to address any concerns not covered in this manual, please contact KEMIMOTO customer service directly.
You can find more information and contact details by visiting the official KEMIMOTO store:
Visit the KEMIMOTO Store on Amazon
No relevant official product videos from the seller were found for embedding in this manual.