Westmark Brasilia Plus Milk Frother 800ml

1. Introduction

Thank you for choosing the Westmark Brasilia Plus Milk Frother. This manual provides detailed instructions for the safe and efficient use of your new appliance. Designed for preparing delicious and firm milk foam for beverages like cappuccino and latte macchiato, this stainless steel frother has a capacity of 800 ml and is suitable for both cold and warm milk.

Image 1: Westmark Brasilia Plus Milk Frother

2. Safety Instructions

• Read all instructions carefully before first use and retain for future reference.
• This frother is designed for household use only.
• Always handle the frother by its heat-resistant handle when hot.
• Do not fill the frother beyond the maximum capacity mark to prevent overflow, especially when heating milk.
• Ensure the frother is placed on a stable, heat-resistant surface when used on a stovetop.
• Do not leave the frother unattended while heating milk.
• Keep out of reach of children.
• Avoid sudden temperature changes, such as placing a hot frother under cold water, which could damage the material.

3. Components

The Westmark Brasilia Plus Milk Frother consists of the following main components:

1. Stainless Steel Pitcher: The main container for milk.
2. Heat-Resistant Handle: For safe handling.
3. Lid: Covers the pitcher during frothing.
4. Plunger with Frothing Disc: The mechanism used to create milk foam, attached to the lid.
5. Lid Knob: For easy removal and handling of the lid/plunger assembly.

Image 2: Components of the Westmark Milk Frother

4. Setup

Before first use, wash all components (pitcher, lid, and plunger) thoroughly with warm soapy water, rinse, and dry completely. This ensures hygiene and removes any manufacturing residues.

5. Operating Instructions

The Westmark Brasilia Plus Milk Frother can be used to create both cold and warm milk foam.

5.1. For Cold Milk Foam

1. Pour cold milk into the stainless steel pitcher. For optimal frothing, fill the pitcher to approximately one-third of its total capacity (e.g., 250-300 ml). Do not exceed the maximum fill line if present.
2. Place the lid with the plunger assembly onto the pitcher, ensuring it is securely seated.
3. Hold the handle firmly and rapidly pump the plunger up and down for approximately 20-30 seconds, or until the milk has doubled in volume and reached your desired consistency.
4. Carefully remove the lid and plunger. Your cold milk foam is ready to serve.

5.2. For Warm Milk Foam

1. Pour cold milk into the stainless steel pitcher, filling to approximately one-third of its total capacity (e.g., 250-300 ml).
2. Place the pitcher directly onto a suitable stovetop (electric, ceramic, gas, or induction cooktop).
3. Heat the milk to your desired temperature. Do not allow the milk to boil. Remove from heat immediately once hot.
4. Carefully place the lid with the plunger assembly onto the hot pitcher.
5. Hold the handle firmly and rapidly pump the plunger up and down for approximately 20-30 seconds, or until the milk has doubled in volume and reached your desired consistency.
6. Carefully remove the lid and plunger. Your warm milk foam is ready to serve.

Image 3: Operating the Frothing Plunger

Image 4: Westmark Milk Frother in use, producing foam for coffee

6. Cleaning and Maintenance

Proper cleaning ensures the longevity and hygiene of your milk frother.

• After Each Use: Rinse all components immediately with warm water to prevent milk residue from drying.
• Dishwasher Safe: The Westmark Brasilia Plus Milk Frother is dishwasher safe. Place all components on the top rack of your dishwasher.
• Hand Washing: If washing by hand, use warm soapy water and a soft sponge or brush. Ensure all milk residue is removed from the frothing disc and pitcher. Rinse thoroughly and dry completely before storing.
• Do not use abrasive cleaners or scouring pads, as these can scratch the stainless steel surface.

7. Troubleshooting

• Milk not frothing or foam is thin:
  • Ensure you are using fresh, cold milk. Whole milk generally produces the best foam.
  • Check that the milk level is appropriate (approximately one-third of the pitcher's capacity).
  • Pump the plunger more vigorously or for a longer duration.
• Milk overflowing during frothing:
  • Reduce the amount of milk in the pitcher.
  • Ensure the lid is properly seated.
• Frother not heating on induction cooktop:
  • While the product is designed for induction, some induction cooktops have minimum base diameter requirements. Ensure your cooktop is compatible with the frother's base. Consult your cooktop's manual for specific requirements.

8. Specifications

9. Warranty and Support

For warranty information or product support, please refer to the documentation provided with your purchase or contact Westmark customer service directly. Contact details can typically be found on the manufacturer's official website or on the product packaging.