Walk W105 Rose Gold Wireless Headphones User Manual

1. Introduction

Thank you for purchasing the Walk W105 Rose Gold Wireless Headphones. This manual provides essential information for setting up, operating, and maintaining your headphones to ensure optimal performance and longevity. Please read this manual thoroughly before use and retain it for future reference.

2. Package Contents

Please check the package for the following items:

• Walk W105 Rose Gold Wireless Headphones
• USB Charging Cable
• User Manual

3. Product Overview

The Walk W105 headphones feature a stylish rose gold design with comfortable padded ear cups and an adjustable headband. Key controls are located on the earcup for easy access.

Figure 3.1: Front view of the Walk W105 Rose Gold Wireless Headphones, showcasing the overall design and padded earcups.

Controls and Indicators

Figure 3.2: Close-up view of the right earcup, detailing the control buttons for power, playback, volume, and mode selection.

• Power Button (⏻): Press and hold to power on/off. Short press for play/pause.
• Volume Up / Next Track (▶▶|): Short press to increase volume. Long press to skip to the next track.
• Volume Down / Previous Track (◀◀|): Short press to decrease volume. Long press to go to the previous track.
• Mode Button (M): Press to switch between different modes (e.g., Bluetooth, FM Radio if supported).
• Microphone: Built-in for hands-free calls.
• LED Indicator: Displays status (e.g., charging, pairing, connected).
• USB Charging Port: For connecting the charging cable.

Foldable Design

The headphones feature a foldable design for easy storage and portability.

Figure 3.3: The headphones in their folded position, demonstrating their compact design for travel and storage.

4. Setup

4.1 Charging the Headphones

1. Connect the small end of the USB charging cable to the USB charging port on the headphones.
2. Connect the larger end of the USB charging cable to a USB power source (e.g., computer USB port, USB wall adapter).
3. The LED indicator will illuminate, typically red, to show that the headphones are charging.
4. Charging typically takes 2-3 hours. The LED indicator will change color or turn off when charging is complete.

Note: Ensure the headphones are fully charged before first use for optimal battery life.

4.2 Bluetooth Pairing

1. Power On: Press and hold the Power button (⏻) for approximately 3-5 seconds until the LED indicator flashes blue and red alternately, indicating pairing mode.
2. Activate Bluetooth: On your Bluetooth-enabled device (smartphone, tablet, computer), go to the Bluetooth settings and ensure Bluetooth is turned on.
3. Select Device: In the list of available Bluetooth devices, locate and select "W105" or "Walk Headphones".
4. Confirm Connection: Once successfully paired, the LED indicator on the headphones will typically flash blue slowly or turn solid blue. A voice prompt may also confirm the connection.
5. Reconnect: The headphones will automatically attempt to reconnect to the last paired device when powered on, if the device's Bluetooth is active and within range (up to 10 meters).

5. Operating Instructions

5.1 Music Playback

• Play/Pause: Short press the Power button (⏻).
• Volume Up: Short press the Volume Up / Next Track button (▶▶|).
• Volume Down: Short press the Volume Down / Previous Track button (◀◀|).
• Next Track: Long press the Volume Up / Next Track button (▶▶|).
• Previous Track: Long press the Volume Down / Previous Track button (◀◀|).

5.2 Phone Calls

With the built-in microphone and in-line controls, you can manage phone calls directly from your headphones.

• Answer Call: Short press the Power button (⏻) when an incoming call rings.
• End Call: Short press the Power button (⏻) during a call.
• Reject Call: Long press the Power button (⏻) when an incoming call rings.
• Redial Last Number: Double-press the Power button (⏻) when not on a call.

6. Maintenance and Care

• Cleaning: Use a soft, dry cloth to clean the headphones. Do not use abrasive cleaners or solvents.
• Water Resistance: These headphones are NOT water resistant. Avoid exposure to water, moisture, rain, or sweat to prevent damage.
• Storage: When not in use, store the headphones in a cool, dry place, away from direct sunlight and extreme temperatures. The foldable design allows for compact storage.
• Battery Care: To preserve battery life, charge the headphones regularly, even if not used frequently. Avoid fully depleting the battery for extended periods.

7. Troubleshooting

If you encounter issues with your headphones, please refer to the following common solutions:

• Headphones won't turn on: Ensure the headphones are fully charged. Connect them to a power source and try again after a few minutes.
• Cannot pair with device:
  • Ensure the headphones are in pairing mode (LED flashing blue and red).
  • Make sure Bluetooth is enabled on your device.
  • Move the headphones closer to your device (within 10 meters).
  • Turn off and on both the headphones and your device's Bluetooth.
  • Clear the Bluetooth device list on your device and try pairing again.
• No sound or low volume:
  • Check the volume levels on both the headphones and your connected device.
  • Ensure the headphones are properly paired and connected.
  • Try playing audio from a different application or source.
• Charging issue:
  • Verify the charging cable is securely connected to both the headphones and the power source.
  • Try using a different USB charging cable or power adapter.
  • Ensure the charging port on the headphones is clean and free of debris.

8. Specifications

Refer to the table below for detailed technical specifications of the Walk W105 Rose Gold Wireless Headphones.

Figure 8.1: Rear view of the product packaging, displaying key specifications and compliance information.

9. Warranty and Support

For warranty information and customer support, please refer to the documentation provided at the point of purchase or contact the retailer. You may also visit the official Walk brand website for further assistance.