Instruction Manual

Introduction

Thank you for purchasing the 1797 S25 1157 RGB LED Bulb Kit. This product is designed to provide versatile lighting options for your vehicle's brake, tail, turn signal, reverse, or rear fog lights. Featuring 16 color options and 5 dynamic modes, these bulbs offer enhanced customization and visibility. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your LED bulbs.

Safety Information

• Professional Installation: Professional installation is recommended to ensure correct wiring and prevent damage to the bulbs or vehicle's electrical system.
• Voltage Compatibility: Ensure your vehicle's electrical system is DC 12V. Using incorrect voltage may damage the bulbs.
• Handling Precautions: Avoid touching the LED chips directly with bare hands. Oils and contaminants can reduce lifespan or cause burnout.
• Heat Dissipation: Ensure adequate space for heat dissipation around the bulbs. Restricted airflow can lead to overheating and premature failure.
• CANBUS Systems: For some European vehicles equipped with CANBUS systems, an additional decoder or load resistor may be required to prevent error codes or flickering. These bulbs may not function correctly in certain vehicle models (e.g., Volkswagen, Hyundai Sonata, KIA K3 and K5, some newest or European vehicles) without such modifications.
• Installation Space: Verify available installation space in your vehicle's light housing. Some vehicles may require minor modifications for proper fitment.

Package Contents

Upon opening the package, please verify that all components are present and undamaged:

• 2 x S25 1157 RGB LED Bulbs
• 1 x Remote Control (Ensure to remove the plastic tab from the battery compartment before first use.)

Image: The package contents, including two LED bulbs and their accompanying remote control.

Specifications

Image: Detailed specifications and dimensions of the S25 1157 RGB LED bulb.

Installation Guide

The 1797 S25 1157 RGB LED bulbs are designed for plug-and-play installation. However, always ensure safety precautions are followed.

1. Vehicle Preparation: Turn off your vehicle's ignition and ensure all lights are off. Disconnect the negative terminal of your vehicle's battery for added safety.
2. Access Bulb Socket: Locate the light housing for the bulb you intend to replace (e.g., brake light, turn signal). Access the bulb socket, which may require removing a cover or panel depending on your vehicle model.
3. Remove Old Bulb: Carefully twist or pull out the existing bulb from its socket.
4. Insert New LED Bulb: Align the base of the 1797 S25 1157 RGB LED bulb with the socket. Insert the bulb and twist or push it firmly into place until it is securely seated. Ensure the bulb fits perfectly into the same size socket.
5. Test Functionality: Reconnect the vehicle's battery. Turn on the ignition and test the newly installed LED bulbs. Verify that they light up and respond to the remote control.
6. Secure Components: Once confirmed operational, reassemble any covers or panels removed during installation.

Important Note: If the bulbs do not light up or flicker upon initial installation, especially in European vehicles with CANBUS systems, it may indicate a compatibility issue. In such cases, installing a compatible decoder or load resistor (not included) may be necessary to resolve the issue. These bulbs are not compatible with certain vehicle models such as Volkswagen, Hyundai Sonata, KIA K3, and K5, or some newer European vehicles without additional modifications.

Operating Instructions

The 1797 S25 1157 RGB LED bulbs are controlled using the included remote control. Ensure the plastic tab is removed from the remote's battery compartment before first use.

Remote Control Functions:

Image: Layout of the remote control, highlighting buttons for brightness, power, static colors, and dynamic modes.

• Brightness Control: Use the Sun Up and Sun Down buttons to adjust the brightness level of the bulbs.
• Power ON/OFF: Press the ON button to turn the lights on, and the OFF button to turn them off.
• Static Color Selection: The remote features 16 color buttons (e.g., Red, Green, Blue, White, Amber, Yellow, etc.). Press any color button to set the bulbs to that specific static color.
• Dynamic Modes:
  • FLASH: Activates a rapid flashing mode.
  • STROBE: Initiates a quick, intermittent flashing effect.
  • FADE: Transitions smoothly between colors.
  • SMOOTH: Provides a gradual, continuous color change.

Usage Tip: For optimal remote control response, point the remote directly towards the bulbs within a 5-meter range.

Troubleshooting

Maintenance

The 1797 S25 1157 RGB LED bulbs are designed for long-term durability with minimal maintenance. Follow these guidelines to ensure their continued performance:

• Cleaning: If necessary, gently wipe the bulbs with a soft, dry, lint-free cloth. Avoid using harsh chemicals or abrasive materials that could damage the LED chips or housing.
• Inspection: Periodically inspect the bulbs for any signs of damage or loose connections. Ensure they remain securely seated in their sockets.
• Storage: If storing the bulbs for an extended period, keep them in their original packaging or a protective container in a cool, dry place away from direct sunlight and extreme temperatures.

Warranty and Support

For any questions, concerns, or support regarding your 1797 S25 1157 RGB LED Bulb Kit, please refer to the following:

• Customer Service: Please contact the seller or manufacturer directly through the platform where the product was purchased for assistance with product issues, returns, or warranty claims.
• Online Resources: Visit the official 1797 Store on Amazon for additional product information and support: 1797 Official Store.

Please retain your proof of purchase for any warranty-related inquiries.