Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Filtrete™ Allergen Reduction HEPA-Type Room Air Purifier Filter, model FAPF-F1-A (also known as F1). This filter is designed to work with Filtrete Room Air Purifier Devices FAP-C01-F1 and FAP-T02-F1, helping to reduce airborne particles and improve indoor air quality.
Figure 1: A new Filtrete F1 Allergen Reduction HEPA-Type Room Air Purifier Filter, still sealed in its protective packaging, ready for installation.
Setup Instructions
Before installing the filter, ensure your air purifier is unplugged from the power outlet. This filter is compatible with Filtrete Room Air Purifier Devices FAP-C01-F1 and FAP-T02-F1.
- Locate the filter compartment on your Filtrete air purifier. This is typically found by removing a cover on the side or back of the unit.
- Gently remove the old filter by pulling on the designated tabs. Dispose of the used filter responsibly.
- Unpack the new Filtrete F1 filter. Note the foam border on the filter, which ensures a snug fit.
- Insert the new filter into the compartment, ensuring it is oriented correctly according to the air purifier's design. The filter should slide in easily and fit securely.
- Replace the air purifier's cover securely.
- Plug the air purifier back into the power outlet.
For a visual guide on filter replacement, please refer to the video below:
Video: High Performance HEPA F1 air filter replacement. This video provides a step-by-step guide on how to replace the F1 air filter in a compatible air purifier, demonstrating the ease of installation.
Operating Instructions
The Filtrete air purifier, when equipped with the F1 filter, offers various settings for optimal air purification.
- Power Button: Press to turn the unit on or off.
- Fan Speed: Select from multiple fan speeds (e.g., 1, 2, 3) to adjust airflow and purification intensity. Higher speeds provide faster air cleaning.
- Timer: Set the air purifier to operate for a specific duration (e.g., 2, 4, 8 hours) before automatically turning off.
- Filter Indicator: A light will illuminate to indicate when the filter needs to be replaced.
- Light Button: This button controls the illumination of the indicator lights on the control panel. Press it to turn the lights on or off, which can be useful in dark environments.
Refer to your air purifier's specific manual for detailed control panel functions.
Maintenance
Regular filter replacement is crucial for maintaining the efficiency of your Filtrete air purifier and ensuring clean air.
- Filter Replacement Frequency: It is recommended to change your Filtrete F1 filter every 6 months, or when the filter indicator light on your air purifier illuminates.
- Replacing the Filter: Follow the steps outlined in the 'Setup Instructions' section to replace the filter. Always ensure the air purifier is unplugged before performing maintenance.
- Resetting the Filter Indicator: After replacing the filter, press and hold the 'Reset' button (often labeled 'Filter Reset') on the control panel for a few seconds until the indicator light turns off. This resets the internal timer for the new filter.
Figure 2: A close-up view of the pleated F1 filter, showing its intricate design for capturing fine particles.
Figure 3: The back of the Filtrete F1 filter packaging, illustrating its capabilities in allergen reduction, true HEPA filtration, and odor removal.
Additional videos demonstrating filter features:
Video: F1 Filter Allergen Reduction+Odor Removal. This video demonstrates the features of the F1 filter, highlighting its allergen reduction and odor removal capabilities.
Video: F1 Filter Allergen Reduction, F1 True HEPA Filter - H11. A brief overview of the F1 True HEPA Filter (H11), emphasizing its allergen reduction properties.
Troubleshooting
- Filter Indicator Light Remains On: If the filter indicator light remains on after replacing the filter, ensure you have pressed and held the 'Reset' button on the air purifier's control panel until the light turns off.
- Reduced Airflow: Check if the filter is installed correctly and not obstructed. If the filter is old, replace it.
- Unusual Odors: If new odors are present, ensure the filter is new and properly installed. If the filter is old, it may be saturated and require replacement.
Specifications
| Feature | Detail |
|---|---|
| Brand Name | Filtrete |
| Model Info | Filter F1 |
| Item Weight | 10.5 ounces (0.3 Kilograms) |
| Product Dimensions | 12 x 6.75 x 1.75 inches (12"L x 6.75"W x 1.75"Th) |
| Item Model Number | Filter F1 |
| Part Number | FAPF-F1-A |
| Color | White |
| Compatible Devices | Air Cleaner, Air Purifier (FAP-C01-F1 and FAP-T02-F1) |
| Material Type | Polypropylene |
| Air Filter Construction | Pleated |
| Number of Items | 1 |
| UPC | 638060162545 |
Warranty and Support
Filtrete products are backed by over 25 years of filtration experience, ensuring quality and reliability.
For further assistance, product information, or to explore other Filtrete products, please visit the official Filtrete Store:
