1. Introduction
The VAXIS Storm 1000S is a high-performance, zero-delay HD wireless video transmission system designed for professional film and video productions. It offers a robust solution for transmitting high-definition video signals over significant distances with minimal latency. This system is ideal for scenarios requiring a balance of long-range capability and a compact form factor, and it is compatible with other VAXIS STORM series models for flexible integration into existing setups.
Key features include cutting-edge built-in antennas, support for timecode, flags, and metadata pass-through, and a durable design with recessed ports to prevent common damage. The unit also features an OLED display for real-time monitoring of critical operational parameters.
2. Safety Information
Important: Before operating the VAXIS Storm 1000S wireless video transmission system, users must consult and adhere to the wireless frequency regulations of local authorities. VAXIS, its distributors, dealers, and rental partners are not liable for any violations of these local regulations. Use this product at your own discretion and in compliance with all applicable laws.
- Do not expose the device to extreme temperatures, moisture, or direct sunlight.
- Use only VAXIS-approved power adapters and cables.
- Avoid dropping the unit, as this can cause internal damage.
- Do not attempt to disassemble or modify the device. Refer all servicing to qualified personnel.
- Ensure proper ventilation during operation to prevent overheating.
3. Package Contents
The VAXIS Storm 1000S kit typically includes the following components:
- 1 x VAXIS Storm 1000S Transmitter (Tx)
- 1 x VAXIS Storm 1000S Receiver (Rx)
- Gold Mount Plates (pre-installed or included for attachment)
- Power Cables (e.g., D-Tap to 2-pin Lemo compatible)
- Mounting Bracket (for Tx unit)
- User Manual (this document)
4. Setup
Follow these steps to set up your VAXIS Storm 1000S system:
- Mounting the Transmitter (Tx):
Attach the Tx unit to your camera rig (e.g., camera, gimbal, drone, Steadicam) using the provided mounting bracket. The unique mounting design ensures a low-profile and streamlined setup.
- Mounting the Receiver (Rx):
Mount the Rx unit to your monitor, director's monitor, or video village setup. Ensure it is positioned for optimal line-of-sight with the Tx unit.
- Power Connection:
Connect power to both the Tx and Rx units. The Gold Mount plates allow for direct attachment of Gold Mount batteries. Alternatively, use the provided power cables to connect to a suitable power source (e.g., D-Tap from a camera battery or an AC adapter).
- Video Input/Output:
Connect your camera's video output (e.g., SDI or HDMI) to the video input port on the Tx unit. Connect the video output port on the Rx unit to your monitor's video input.
- Antennas:
The Storm 1000S features built-in antennas. Ensure there are no obstructions directly covering the antenna areas on both units for best performance.
5. Operating Instructions
Once the system is set up, follow these steps for operation:
- Power On:
Press and hold the power button on both the Tx and Rx units until the OLED display illuminates.
- OLED Display Monitoring:
The high-bright OLED display provides crucial information. Monitor the display for:
- Battery Voltage: Indicates remaining power.
- Video Formats: Confirms the detected video input format.
- Channel: Shows the current wireless transmission channel.
- Fan Speed: Indicates the cooling fan's operational status.
- Transmission Strength: Displays the signal quality between Tx and Rx.
- Channel Selection (if applicable):
If interference is detected or multiple systems are in use, you may need to manually select a different transmission channel. Refer to the device's menu system via the control buttons to change channels. Ensure both Tx and Rx are on the same channel.
- Video Transmission:
Once powered on and connected, the system will automatically establish a wireless link. The video signal from the camera will be transmitted to the receiver with zero delay. The system also passes through timecode, flags, and metadata.
- Power Off:
Press and hold the power button on both units until the OLED display turns off.
6. Maintenance
Proper maintenance ensures the longevity and reliable performance of your VAXIS Storm 1000S system:
- Cleaning: Use a soft, dry cloth to clean the exterior of the units. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the ports or vents. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the units in a cool, dry place, away from direct sunlight and extreme temperatures. Use a protective case during transport.
- Port Inspection: Periodically inspect all ports for dust or debris. Use compressed air to gently clear any obstructions.
- Firmware Updates: Check the official VAXIS website periodically for firmware updates. Follow the provided instructions carefully for any update procedures.
7. Troubleshooting
If you encounter issues with your VAXIS Storm 1000S, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No video signal on receiver. |
|
|
| Intermittent signal or poor quality. |
|
|
| Unit not powering on. |
|
|
If the problem persists after trying these solutions, please contact VAXIS customer support.
8. Specifications
- Model: VAXIS Storm 1000S
- Transmission Range: Up to 1000ft (approx. 300 meters) true line-of-sight
- Latency: Zero Delay
- Antennas: Built-in (on both Transmitter and Receiver)
- Mounting: Gold Mount Plate (for power), dedicated mounting bracket for Tx
- Video Formats: HD (specific formats depend on firmware and input)
- Data Pass-through: Timecode, flags, metadata
- Display: High-bright OLED (shows battery voltage, video formats, channel, fan speed, transmission strength)
- Compatibility: Compatible with other VAXIS STORM series models
- Design: Durable exterior with recessed ports, buttons and I/O on same side
9. Warranty and Support
For warranty information, please refer to the warranty card included with your product or visit the official VAXIS website. VAXIS provides technical support for its products. If you require assistance, have questions, or need to report an issue, please contact VAXIS customer support through their official channels.
Online Resources: For the latest drivers, firmware, and additional support documentation, please visit the official VAXIS website: www.vaxis.cn (Note: This is a placeholder URL, please verify the actual VAXIS support website).
10. Product Images and Videos
No relevant product images or official product videos were provided in the input data for this manual. Please refer to the product packaging or the official VAXIS website for visual references of the VAXIS Storm 1000S Wireless Video Transmission Kit.
