INTECHING R017/R016 Projector Remote Control Instruction Manual

1. Introduction

This manual provides instructions for the INTECHING R017/R016 Projector Remote Control. This remote is designed as a direct replacement for various Hitachi projector models, offering immediate functionality without the need for programming or pairing. Please read this manual carefully to ensure proper use and maintenance of your remote control.

2. Product Overview

The INTECHING R017/R016 remote control features a standard layout for projector functions. Familiarize yourself with the buttons and their respective actions.

Figure 1: Front View of the Remote Control. This image displays the front face of the black remote control, showing all buttons and their labels, including the power button, input selection, navigation, and function keys.

Figure 2: Angled View of the Remote Control. This image shows the remote control from a slight angle, highlighting its ergonomic design and the arrangement of buttons from a different perspective.

Figure 3: Back View of the Remote Control with Battery Cover. This image displays the rear side of the remote control, showing the battery compartment cover securely in place.

Figure 4: Back View of the Remote Control with Battery Cover Removed. This image shows the remote control's battery compartment with the cover removed, revealing the slots for two AA batteries and the spring contacts.

3. Setup: Battery Installation

The remote control requires two (2) AA batteries (not included) for operation. Follow these steps to install the batteries:

1. Locate the battery compartment on the back of the remote control.
2. Press down on the tab and slide the battery cover downwards to remove it (refer to Figure 3 and Figure 4).
3. Insert two AA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. Slide the battery cover back into place until it clicks securely.

Once batteries are installed, the remote is ready for use with compatible projectors.

4. Operating Instructions

This remote control is designed for immediate use with compatible Hitachi projectors. No programming, pairing, or complex setup is required. Simply point the remote at the projector and press the desired function button.

4.1 Basic Functions

• Power Button (⏻): Turns the projector on or off.
• VIDEO / COMPUTER / MY SOURCE / DOC.CAMERA Buttons: Selects the corresponding input source.
• VOLUME +/-: Adjusts the audio output level of the projector.
• MUTE: Silences the projector's audio output.
• MENU: Accesses the projector's on-screen menu.
• ENTER: Confirms selections within the menu.
• ESC: Exits the current menu or function.
• Navigation Arrows (◄ ► ▲ ▼): Navigates through menu options.

4.2 Advanced Functions

• ASPECT: Changes the aspect ratio of the projected image.
• AUTO: Automatically adjusts the image settings.
• SEARCH: Initiates an automatic search for input signals.
• BLANK: Temporarily blanks the screen.
• MAGNIFY ON/OFF: Zooms in or out on a portion of the image.
• FREEZE: Pauses the current image on the screen.
• PAGE UP/DOWN: Navigates through presentations or documents.
• KEYSTONE +/-: Corrects trapezoidal distortion of the image.
• MY BUTTON 1 / MY BUTTON 2: Customizable function buttons (refer to your projector's manual for configuration).
• FOCUS +/-: Adjusts the image focus.
• D-ZOOM +/-: Digitally zooms the image.
• POSITION: Adjusts the image position on the screen.
• RESET: Resets projector settings to default.

4.3 Compatibility

This remote control is compatible with the following Hitachi projector models:

• HL02772, R017
• CP-A220N/NM, CP-A300N/NM, CP-AW250N/NM, iPJ-AW250N, iPJ-AW250NME/NG
• HL02771, R016
• CP-RX79, CP-RX82, CP-RX93, CP-RX94
• CP-WX3014WN, CP-WX4021N, CPWX8
• CP-X2020, CP-X2021WN, CP-X2514WN, CP-X2520, CP-X2521WN
• CP-X3014WN, CP-X3020, CP-X3021WN, CP-X4014WN, CP-X4021N, CP-X5021N
• CPX7, CPX8, CPX9

Important Note: Ensure there is no physical obstruction between the remote control and the projector when operating the device to guarantee proper signal transmission.

5. Maintenance

• Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or abrasive materials.
• Battery Replacement: Replace batteries when the remote's responsiveness decreases. Always replace both batteries at the same time with new ones of the same type (AA).
• Storage: If the remote will not be used for an extended period, remove the batteries to prevent leakage and potential damage. Store in a cool, dry place.
• Avoid Damage: Do not drop the remote, expose it to extreme temperatures, or immerse it in water.

6. Troubleshooting

If you experience issues with your remote control, please refer to the following common solutions:

• Remote Not Responding:
  • Check if the batteries are inserted correctly with the correct polarity (+/-).
  • Replace old batteries with new AA batteries.
  • Ensure there are no obstructions between the remote control's infrared emitter and the projector's receiver.
  • Make sure you are within the effective operating range of the projector.
• Specific Button Not Working:
  • Clean the button area with a soft, dry cloth to remove any debris.
  • If only one button is unresponsive, it might indicate a specific internal issue.

If the problem persists after trying these steps, please contact customer support.

7. Specifications

8. Customer Support

For any questions, concerns, or assistance with your INTECHING R017/R016 Projector Remote Control, please contact our customer service team. Messages will be replied to by our support team within 24 hours.

Please refer to your purchase documentation or the seller's contact information for specific support channels.