NYCE Power LampCharger Light Bulb Socket Adapter Instruction Manual

Introduction

The NYCE Power LampCharger Light Bulb Socket Adapter transforms any standard E26 light socket into a versatile power and charging station. This adapter allows you to continue using your light bulb while simultaneously providing two USB charging ports for various devices. It is designed for convenience and functionality, making it ideal for areas where power outlets are scarce.

Image: The NYCE Power LampCharger Light Bulb Socket Adapter, a white device with an E26 screw base at the bottom and an E26 socket at the top, featuring two USB ports and an on/off switch on its sides.

Important Safety Information

• Ensure power is turned off at the circuit breaker before installation or removal.
• Do not exceed the maximum wattage of 60 watts for the light bulb socket.
• This adapter is designed for indoor use or in outdoor fixtures that are fully enclosed and protected from direct weather exposure. If used outdoors, ensure the USB connections are waterproofed using the provided tape or other suitable methods.
• Do not disassemble the adapter. Refer servicing to qualified personnel.
• Keep away from water and excessive moisture.

Package Contents

Your package should contain the following items:

• NYCE Power LampCharger Light Bulb Socket Adapter (Model: B07P9SDHRY)
• Waterproof tape (for outdoor use)

Image: Retail packaging for the NYCE Power LampCharger, showing two adapters in clear plastic cases with product information.

Setup and Installation

1. Turn Off Power: Locate the light switch controlling the fixture where you intend to install the adapter. Turn it off. For added safety, turn off the power at the circuit breaker.
2. Remove Existing Bulb: Carefully unscrew and remove the existing light bulb from the socket.
3. Install Adapter: Screw the NYCE Power LampCharger adapter into the empty E26 light socket. Ensure it is screwed in firmly but do not overtighten.
4. Install Light Bulb: Screw your E26 light bulb (smart bulb recommended for optimal functionality) into the socket on the top of the LampCharger adapter. Ensure the bulb's wattage does not exceed 60W.
5. Connect USB Devices: Plug your USB-powered devices (e.g., security cameras, smartphones, tablets) into the USB ports on the side of the adapter.
6. Restore Power: Turn the power back on at the circuit breaker and then at the light switch.
7. Waterproofing (if applicable): If installing in an outdoor fixture, use the provided waterproof tape to seal the USB connection points to protect them from moisture.

Image: The LampCharger adapter installed in a table lamp, with a light bulb screwed into its top socket.

Image: The LampCharger adapter installed in an outdoor wall-mounted light fixture, with a USB cable connected to a smartphone.

Installation Video Example

Operating Instructions

• The light bulb socket on the adapter functions like a standard light socket. Use the existing light switch to turn the light bulb on or off.
• The USB charging ports provide continuous power (5V 2.4A Total) as long as the light fixture's power is on. The USB ports operate independently of the light bulb's on/off state if the adapter has a separate switch for the light. For models without a separate switch, the light fixture's power must remain on for USB charging.
• Connect your devices to the USB ports using their respective charging cables.

Image: The LampCharger adapter with two smartphones connected to its USB ports, illustrating its charging capability.

Usage Example Video

Compatibility

The LampCharger adapter is compatible with standard E26 light sockets and E26 base light bulbs. It is recommended to use smart bulbs (e.g., Wi-Fi functionality, Bluetooth functionality, motion sensing, sound sensing, or LED dusk-to-dawn features) for enhanced control and energy efficiency. The USB ports are compatible with most USB-powered devices, including:

• Smartphones
• Tablets
• Security Cameras (e.g., Ring, Blink, Nest, Wyze)
• USB-powered string lights
• Other small electronic devices requiring 5V USB power.

Image: The LampCharger adapter in a bedside lamp, charging a tablet and a smartphone, demonstrating its indoor utility.

Compatibility Video Example

Specifications

Maintenance

• Ensure power is off before cleaning.
• Wipe the adapter with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Regularly check the adapter and connected cables for any signs of wear or damage. Replace if necessary.

Troubleshooting

• Light bulb not working:
  • Ensure the adapter is screwed in firmly.
  • Check if the light bulb is screwed in correctly and is not faulty.
  • Verify the light fixture's power switch and circuit breaker are on.
  • Ensure the light bulb wattage does not exceed 60W.
• USB devices not charging:
  • Confirm the light fixture's power is on.
  • Check if the USB cable is securely connected to both the adapter and the device.
  • Test with a different USB cable or device to rule out cable/device issues.
  • Ensure the device's power requirements do not exceed 5V 2.4A.
• Adapter feels loose in socket:
  • Carefully tighten the adapter into the light socket. If it remains loose, the socket itself may be worn and require professional inspection.

Warranty and Support

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official NYCE Power website. Keep your purchase receipt for warranty claims.