1. Introduction
Thank you for purchasing the Linq IS-U706 HDTV Adapter. This adapter allows you to mirror the screen of your Android or iOS smartphone/tablet to an HDMI-enabled display such as a TV, projector, or monitor, supporting up to 1080P resolution. Please read this manual carefully before use to ensure proper operation and to maximize the product's lifespan.
2. Safety Information
- Do not expose the adapter to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the adapter to strong impacts.
- Do not attempt to disassemble or modify the adapter. This will void the warranty.
- Use only compatible power sources (5V/1A or 5V/2A USB charger) to power the adapter.
- Keep out of reach of children.
3. Package Contents
- 1 x Linq IS-U706 HDTV Adapter
- 1 x User Manual (this document)
4. Product Overview
The Linq IS-U706 HDTV Adapter features multiple connectors for broad compatibility.
Image 1: Overview of the Linq IS-U706 HDTV Adapter. This image displays the main adapter unit with its HDMI output connector, the USB-A male cable for power, and the USB-A female input port for connecting your mobile device's charging cable.
- HDMI Output: Connects to your TV, monitor, or projector.
- USB-A Male (Power): Connects to a 5V/1A or 5V/2A USB power adapter.
- USB-A Female (Input): Connects to your smartphone's or tablet's charging cable (Lightning for iOS, Micro USB/USB-C for Android).
5. Setup Instructions
Follow these steps to connect your device to an external display:
- Connect Power: Plug the USB-A Male connector of the adapter into a 5V/1A or 5V/2A USB power source (e.g., a wall charger, power bank, or TV's USB port). Ensure the power source is active.
- Connect to Display: Plug the HDMI Output connector of the adapter into an available HDMI port on your TV, monitor, or projector. Select the corresponding HDMI input on your display.
- Connect Mobile Device:
- Take your smartphone's or tablet's original charging cable (Lightning for iOS, Micro USB or USB-C for Android).
- Plug the USB-A end of your device's charging cable into the USB-A Female Input port on the Linq adapter.
- Plug the other end of your device's charging cable (Lightning, Micro USB, or USB-C) into your smartphone or tablet.
- Confirmation: Your display should now show the screen of your mobile device. For iOS devices, you may need to confirm 'Trust This Computer' if prompted. For Android devices, ensure USB debugging or screen mirroring options are enabled if mirroring does not start automatically.
Image 2: Example of a smartphone successfully connected to a television using the Linq IS-U706 HDTV Adapter. The phone's screen content is mirrored onto the larger display, showing a photo gallery.
6. Operating Instructions
Once connected, the adapter functions as a direct screen mirror. No additional software or apps are typically required for basic mirroring.
- Screen Mirroring: The content displayed on your smartphone or tablet will be mirrored directly to the connected HDMI display.
- Resolution: The adapter supports video output up to 1080P Full HD. The actual resolution may depend on your source device and display capabilities.
- Audio Output: Audio will typically be transmitted along with the video to the HDMI display. Ensure your display's audio is unmuted and at an audible level.
7. Maintenance
- Clean the adapter with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Store the adapter in a cool, dry place when not in use.
- Avoid bending the cables excessively, especially near the connectors, to prevent damage.
8. Troubleshooting
- No Signal on Display:
- Ensure the adapter is properly powered (5V/1A or 5V/2A).
- Verify the HDMI cable is securely connected to both the adapter and the display.
- Check that the correct HDMI input source is selected on your TV/monitor.
- Try restarting your mobile device and reconnecting all cables.
- No Audio:
- Ensure the volume on your TV/monitor is turned up and not muted.
- Check your mobile device's audio settings.
- Flickering or Unstable Image:
- Ensure the power supply is stable and sufficient (5V/1A or 5V/2A).
- Try a different HDMI port on your display.
- Ensure your mobile device's charging cable is original or MFi certified (for iOS).
- iOS Device Not Mirroring / 'Trust' Prompt:
- When prompted, tap 'Trust' on your iOS device and enter your passcode if required.
- Ensure your iOS device is running a compatible version of iOS.
- Android Device Not Mirroring:
- Some Android devices may require 'USB Debugging' or 'Screen Mirroring' options to be enabled in Developer Options. Refer to your phone's manual for specific instructions.
- Ensure your Android device supports MHL or DisplayPort Alternate Mode over USB-C if using a USB-C cable.
9. Specifications
| Model | IS-U706 |
| Brand | Linq |
| Connector Type | HDMI, Lightning, Micro USB, USB |
| Compatible Devices | Projector, Smartphone, Tablet, Television |
| Compatible Phone Models | iPhone (and other Android smartphones/tablets) |
| Connector Gender | Male to Female |
| Output Resolution | Up to 1080P |
| Power Input | 5V/1A or 5V/2A USB |
Image 3: Angled view of the Linq IS-U706 HDTV Adapter, clearly showing the HDMI output, the USB-A male power input, and the USB-A female port for connecting a mobile device's charging cable.
10. Warranty and Support
This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact Linq customer support. For technical assistance or further inquiries, please visit the official Linq website or contact their customer service department.
