LOCK SOCKET Charger Lock Original USB Cube

1. Product Overview

The LOCK SOCKET Charger Lock is designed to secure USB charging blocks and their associated cords to wall outlets, preventing unauthorized removal or accidental disconnection. This device enhances safety in various environments, including homes, offices, and public facilities, by keeping chargers firmly in place. It is compatible with both standard and Decora-style outlet plates.

Image 1: The LOCK SOCKET Charger Lock installed, highlighting its child-proof, sleek, Made in USA, and anti-theft features.

2. Package Contents

Your LOCK SOCKET Charger Lock package includes:

• 1 x LOCK SOCKET Charger Lock unit
• 1 x Security screw
• 1 x Allen key for installation

3. Installation Instructions

Follow these steps to properly install your LOCK SOCKET Charger Lock:

1. Step 1: Slide your charger cord through the designated slot on the LOCK SOCKET unit.
2. Step 2: Plug your cord into the charger block, then slide the LOCK SOCKET onto the charger block. Ensure the USB slot on the charger block is positioned towards the top of the block as shown in the diagram.
3. Step 3: Remove the existing screw from your wall outlet plate.
4. Step 4: Plug the charger block with the attached LOCK SOCKET into the wall outlet.
5. Step 5: Secure the LOCK SOCKET unit to the wall by inserting the provided security screw through the LOCK SOCKET and into the outlet plate's screw hole. Tighten with the Allen key.

Image 2: Visual guide for the three main installation steps of the LOCK SOCKET Charger Lock.

For a visual demonstration of the installation process, please watch the video below:

Product Dimensions for Compatibility

Ensure your charger block fits within the dimensions of the LOCK SOCKET for proper installation. Refer to the diagram below for detailed measurements:

Image 3: Detailed product dimensions of the LOCK SOCKET Charger Lock for compatibility assessment.

4. Operating Instructions

Once installed, the LOCK SOCKET Charger Lock operates passively by keeping your USB charging block and cord securely fastened to the wall outlet. No further action is required for its anti-theft and child-safe functionality. The charger remains ready for use whenever needed.

Image 4: The LOCK SOCKET Charger Lock securing a charger and cable in a wall outlet, ready for use.

5. Maintenance

The LOCK SOCKET Charger Lock is constructed from durable, fire-resistant ABS material (CYCOLAC FR15U-NA1000) and requires minimal maintenance. To clean, simply wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the material.

6. Troubleshooting

• Charger block does not fit: Verify the dimensions of your charger block against the product specifications (refer to Image 3). The LOCK SOCKET is designed for standard USB charging cubes. Larger or unusually shaped blocks may not be compatible.
• USB cable end does not fit through the slot: Ensure the cable end is small enough to pass through the opening. Some thicker or custom-designed cable connectors may not fit.
• Difficulty tightening the security screw: Ensure the LOCK SOCKET is properly aligned with the outlet plate's screw hole. Do not overtighten the screw, as this can damage the outlet plate or the LOCK SOCKET unit.
• Charger feels loose after installation: Double-check that the security screw is fully tightened and that the charger block is correctly seated within the LOCK SOCKET unit.

7. Specifications

8. Warranty and Support

The LOCK SOCKET Charger Lock is proudly Made in USA, reflecting a commitment to quality and durability. For any questions, technical assistance, or support regarding your product, please refer to the contact information provided with your purchase or visit the official LOCK SOCKET website. Please retain your proof of purchase for warranty claims.