Introduction
This manual provides essential information for the safe and efficient operation of your Neatfi XL 2200 Lumens LED Task Lamp. Please read these instructions thoroughly before use and retain for future reference.
Image: The Neatfi XL LED Task Lamp, a sleek, black, adjustable desk lamp with a wide head, clamped to a desk.
Safety Information
- Ensure the power source matches the lamp's requirements (110V~, 60Hz).
- Do not attempt to disassemble or modify the lamp.
- Keep the lamp away from water or other liquids.
- Avoid direct eye exposure to the LED light for prolonged periods.
- Always unplug the lamp before cleaning or if it will be unused for an extended period.
- Ensure the clamp is securely fastened to a stable surface to prevent tipping.
What's in the Box
- Neatfi XL LED Task Lamp (Model: 9501LED)
- Clamp
- Power Adapter
Setup Instructions
- Attach the Clamp: Securely fasten the clamp to the edge of a stable horizontal surface, such as a desk or table. Ensure the surface thickness is within the clamp's capacity (up to 2.5 inches).
- Insert the Lamp Arm: Insert the bottom stem of the lamp arm into the hole in the clamp bracket. The arm should slide in smoothly and be able to swivel.
- Connect Power: Connect the power cable to the lamp and then plug the adapter into a standard electrical outlet. The power cable features a split design for easy assembly and disassembly.
- Adjust the Lamp Head: Adjust the lamp head to your desired position. The multi-position head joint allows for flexible angling of the light.
Image: A close-up view of the sturdy clamp mechanism securely attached to the edge of a white desk, ready to hold the lamp arm.
Setup Video Guide
Video: An official Neatfi video demonstrating the assembly and setup of the XL 2200 Lumens LED Task Lamp, including clamping to a desk and adjusting the arm and head.
Operating Instructions
Power and Brightness Control
The Neatfi XL LED Task Lamp features a single touch-sensitive button for power and brightness control.
- Power On/Off: Press the power button once to turn the lamp on. Press it twice quickly to turn it off.
- Adjust Brightness: With the lamp on, press the power button repeatedly to cycle through the 4 dimmable brightness levels (25%, 50%, 75%, 100%). The lamp will remember your last brightness setting when turned off and on again.
Image: A visual representation of the four distinct brightness levels (25%, 50%, 75%, 100%) available on the Neatfi XL LED Task Lamp, illustrating the dimmable feature.
Adjusting the Lamp Position
The lamp's adjustable arm and multi-position head joint allow for versatile positioning to suit various tasks and workspaces.
- Arm Adjustment: The articulated arm can be extended, retracted, and angled to direct light precisely where needed.
- Head Adjustment: The lamp head can be swiveled and tilted to optimize illumination and minimize glare.
- 360° Rotation: The base of the lamp arm can rotate 360 degrees within the clamp for maximum flexibility.
Image: The Neatfi XL LED Task Lamp showcasing its fully adjustable design, including a wide 20-inch head, flexible arm, and secure clamp, highlighting its extensive reach and positioning capabilities.
Maintenance
- Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the lamp. Do not use abrasive cleaners or solvents.
- LED Lifespan: The integrated LED lights are designed for long-term use (up to 30,000 hours) and do not require replacement.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Power cable not connected or outlet not working. | Check all power connections. Try a different outlet. |
| Light flickers. | Loose connection or power supply issue. | Ensure all connections are secure. If flickering persists, contact customer support. |
| Cannot adjust brightness. | Incorrect operation of the touch button. | Press the touch button repeatedly to cycle through brightness levels. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | LED Lamp Clamp Silver |
| Item Model Number | 9501LED |
| Brand | Neatfi |
| Light Source Type | LED |
| Brightness | 2200 Lumens |
| Wattage | 24 Watts |
| Color Temperature | 6500 Kelvin |
| Color Rendering Index (CRI) | 80.00 |
| Product Dimensions | 37.4"D x 19.69"W x 32.28"H |
| Item Weight | 4.85 Pounds |
| Power Source | Corded Electric |
| Switch Type | Touch |
| Special Feature | Dimmable |
| Included Components | Adapter, Clamp |
Warranty Information
The Neatfi XL 2200 Lumens LED Task Lamp includes a full 3-year warranty. Please retain your proof of purchase for warranty claims.
Customer Support
For further assistance, troubleshooting, or warranty inquiries, please visit the official Neatfi store or contact their customer service directly.
Official Neatfi Store: Neatfi Store on Amazon