1. Product Overview
The S-Union MP22YA Electric Range Burner Element Unit Set provides replacement heating elements for various electric range stoves. This set includes two (2) MP15YA 6-inch elements and two (2) MP21YA 8-inch elements, designed to restore efficient heating to your appliance.
Image 1: S-Union MP22YA Electric Range Burner Element Unit Set.
Key Features:
- Material: Constructed from durable metal, featuring upgraded Nickel-chromium electric heating wire and 304 stainless steel for enhanced performance and longevity.
- Quick Heating: Designed to heat up quickly, contributing to energy efficiency.
- Durability: Features a Teflon-sprayed center disc cap and insulating magnesium oxide powder inside for stable and durable use, resisting deformation at high temperatures.
- Set Contents: Two (2) MP15YA 6-inch elements (1500 Watt, 230V, 4 coils) and two (2) MP21YA 8-inch elements (2100 Watt, 230V, 5 coils).
Image 2: Internal components and material composition of the burner elements.
2. Compatibility
This burner element set is designed to fit most electric ranges. It is crucial to verify compatibility with your specific stove model and drip pan sizes before installation.
Important Compatibility Notes:
- Exclusions: This set does not fit GE and Hotpoint electric ranges.
- Y-Bracket Size: Ensure your stove's 'Y' bracket size matches the dimensions provided for MP15YA and MP21YA elements to ensure proper fit.
- Drip Pan Size: Verify your drip pan sizes. For 8-inch elements, drip pans should be at least 8.1 inches. For 6-inch elements, drip pans should be at least 6.2 inches.
Image 3: MP15YA and MP21YA element dimensions and Y-bracket sizes.
Image 4: Drip pan size guide for proper fit.
Compatible Brands and Part Numbers:
This set is compatible with many models from brands such as Hardwick, Kenmore, Maytag, Norge, and Whirlpool. Refer to the image below for a detailed list of compatible models and replacement part numbers.
Image 5: Compatible range models and brands.
Common Replacement Part Numbers: 484782, 9761347, 12001231, S46Y15, 5304431014, 484783, SU204, 04000034, 0045546, 0051088, 0054794, 0067069, 0071930, 3374, AP3075808, PS340571, EAP340571.
Image 6: Detailed replacement part numbers for MP21YA and MP15YA.
3. Safety Instructions
Always prioritize safety when handling and installing electrical components. Read and follow all safety instructions carefully to prevent injury or damage.
Image 7: Essential Safety Instructions.
- This product is intended for indoor household use only.
- ALWAYS disconnect all electrical equipment from the power source before replacing the item or performing any maintenance.
- DO NOT use the product if the cord or the product appears damaged.
- DO NOT pour flammable materials on the product.
- DO NOT use this product for any purpose other than its intended use as a range burner element.
- When using any electrical appliance, basic safety precautions should always be observed.
- This product is intended to warm and heat foods. When young children or infirm persons use this product, close supervision is necessary. Children should be supervised to ensure that they do not play with the product.
- Make sure other people do not touch the switch during product use.
- To avoid hazard, this Electric Range Burner Element Unit MUST NOT be used to dry towels or any other articles that have been in contact with oil, petroleum-based products, or dry cleaning fluids.
- Use this product only with the voltage specified on the rating label, or elsewhere in these instructions.
WARNING: In order to avoid hazard to people, please switch this item off when not in use.
4. Installation Guide
Follow these steps for safe and proper installation of your new S-Union burner elements.
- Prepare the parts and turn off energy: Ensure your stove is completely unplugged from the power outlet or the circuit breaker is turned off before beginning. Gather your new burner elements.
- Unplug the old burner: Carefully pull out the old burner element from its receptacle.
- Plug the new burner element back: Align the prongs of the new burner element with the receptacle and push it firmly into place. Ensure a secure connection.
- Installation complete: Once all elements are replaced, restore power to the stove.
Image 8: Step-by-step installation process.
Installation Tips:
- If the stove burner does not sit flat on your stove, ensure the connection bolts are parallel and pushed slightly down.
5. First Use & Operation
Understanding the initial behavior of new burner elements is important for a smooth experience.
Initial Use (Protective Coating Burn-off):
When using the new burner elements for the first time, a protective coating on the surface will volatilize due to the high temperature. This may cause a small amount of smoke (smog) to be emitted. This is a normal occurrence and is caused by the protective layer of the new burner element.
- To complete the burn-off process, continue to use the product for approximately 20 minutes during its first operation.
- After this initial period, there should be no more smoke during subsequent uses.
Image 9: Illustration of initial burn-off and heat test.
6. Maintenance & Care
Proper care helps extend the life and maintain the performance of your burner elements.
- Cleaning: Ensure the elements are completely cool before cleaning. Wipe down with a damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish or material.
- Regular Inspection: Periodically inspect the elements for any signs of wear, damage, or loose connections.
- Drip Pans: Keep drip pans clean to prevent residue buildup that could affect element performance or cause odors.
7. Troubleshooting
This section addresses common issues you might encounter with your burner elements.
Common Symptoms Addressed by Replacement:
- Element Doesn't Heat Up: If an element fails to heat, ensure it is properly seated in its receptacle and that power is supplied to the stove.
- Uneven Heating: New elements are designed for even heat distribution. If uneven heating occurs, check for proper seating and ensure the element is not bent or damaged.
- Old Damage: Replace elements showing signs of old damage, such as corrosion, warping, or visible breaks in the coil.
Image 10: Symptoms fixed by replacing burner elements.
General Troubleshooting Tips:
- Element Not Sitting Flat: If a burner element does not sit flat on your stove, ensure the connection bolts are parallel and pushed down slightly into the receptacle.
- Smoke During First Use: As noted in Section 5, a small amount of smoke is normal during the first 20 minutes of operation due to the protective coating burning off. This is not a defect.
- No Power: If no elements are heating, check your stove's power cord connection and the household circuit breaker.
8. Product Specifications
| Specification | Detail |
|---|---|
| Product Name | Electric Range Burner Element Unit Set |
| Model Number | MP22YA |
| Manufacturer | S-Union |
| Material | Metal (Nickel-chromium, 304 Stainless Steel) |
| Item Weight | 3.25 pounds |
| Package Dimensions | 9.8 x 8.03 x 4.09 inches |
| MP15YA Element Size | 6 inches (4 coils) |
| MP15YA Wattage/Voltage | 1500 Watt, 230V |
| MP21YA Element Size | 8 inches (5 coils) |
| MP21YA Wattage/Voltage | 2100 Watt, 230V |
| Quantity | 4 elements (2 x 6-inch, 2 x 8-inch) |
9. Warranty and Customer Support
S-Union is committed to providing high-quality products and excellent customer service.
Warranty Information:
This product comes with an 18-month warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product meets specified quality standards.
Customer Support:
If you encounter any problems with your S-Union Electric Range Burner Element Unit Set, please do not hesitate to contact our customer support team. We aim to provide prompt assistance and will reply to your inquiries within 24 hours.
Image 11: After-sales service commitment.
For support, please visit the official S-Union store on Amazon or use the contact information provided with your purchase documentation.