POWE-tech AC/DC Adapter PP-02 for PoweRoll SW-120150 Electric Cigarette Rolling Maker Instruction Manual

1. Introduction

This manual provides instructions for the safe and effective use of the POWE-tech AC/DC Adapter PP-02. This adapter is designed to power the PoweRoll SW-120150 TOP-O-Matic Electric Cigarette Rolling Maker.

2. Safety Information

• Read all instructions before use.
• Do not expose the adapter to water or excessive moisture.
• Do not disassemble or attempt to repair the adapter.
• Use only with compatible devices as specified.
• Ensure proper ventilation around the adapter during use.
• Unplug the adapter from the power outlet when not in use for extended periods.
• Keep out of reach of children.

3. Product Features

• Compatibility: Specifically designed for the PoweRoll SW-120150 TOP-O-Matic Electric Cigarette Rolling Maker.
• Input Voltage: Supports a wide range of input voltages from 100V to 240V AC, suitable for worldwide use.
• Output Wattage: Provides 10 watts of power.
• Cable Length: Features a 5-foot cable for flexible placement.
• Safety Features: Incorporates an intelligent switching circuit to prevent overcharging and includes short circuit protection. The plug is designed not to overheat.
• LED Light: Equipped with an LED indicator light.

4. Setup

1. Inspect the Adapter: Before connecting, visually inspect the adapter and its cable for any signs of damage.
2. Connect to Device: Insert the barrel connector of the adapter firmly into the power input port of your PoweRoll SW-120150 Electric Cigarette Rolling Maker.
3. Connect to Power Outlet: Plug the 2-pin main power connector into a standard wall outlet (100V-240V AC).
4. Verify Connection: The LED light on the adapter should illuminate, indicating that power is being supplied.

Figure 1: The POWE-tech AC/DC Adapter, showing its main body, the barrel connector for device input, and the 2-pin plug for wall outlet connection. The cable length is approximately 5 feet.

Figure 2: A close-up view of the POWE-tech AC/DC Adapter, highlighting its compact design and visible specifications or branding on the adapter body. This adapter is designed for efficient power delivery.

5. Operating Instructions

Once connected, the adapter continuously supplies power to the PoweRoll SW-120150 Electric Cigarette Rolling Maker.

The intelligent switching circuit manages power delivery to prevent overcharging if the connected device has a battery.

The LED indicator confirms active power supply.

6. Maintenance and Care

• Cleaning: Disconnect the adapter from both the power outlet and the device before cleaning. Wipe with a dry, soft cloth. Do not use liquid cleaners.
• Storage: Store the adapter in a cool, dry place when not in use. Avoid wrapping the cable too tightly.
• Handling: Do not pull the cable to disconnect the adapter; always grasp the plug.

7. Troubleshooting

If you encounter issues, refer to the following troubleshooting guide:

• No Power / LED Not Lit:
  • Ensure the adapter is securely plugged into both the wall outlet and the device.
  • Check if the wall outlet is functional by plugging in another device.
  • Inspect the cable and connectors for any visible damage. If damaged, discontinue use and replace the adapter.
• Device Not Functioning Correctly:
  • Verify that the adapter is the correct model for your PoweRoll SW-120150 Electric Cigarette Rolling Maker.
  • Consult the manual for your PoweRoll device for specific power requirements.
• Adapter Overheating:
  • Disconnect immediately. Ensure there is adequate ventilation around the adapter. If overheating persists, discontinue use.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact POWE-tech customer service.

Keep your purchase receipt for warranty claims.