1. Product Overview
The Speakman SLV-1010 Neo Trim and Shower Combination is designed to provide a functional and integrated shower system. This combination includes the Shower Valve Trim (CPT-1001), the Neo Anystream 2.5 GPM Shower Head (S-3010), and the Neo Shower Arm and Flange (S-2540). Please note that the shower valve itself is not included and must be purchased separately.
This trim system is compatible with Speakman's Pressure Balancing Valve (CPV-PB) or Thermostatic/Pressure Balancing Valve (CPV-TP), which are available in three distinct connection types.
Image 1.1: The Speakman SLV-1010 Neo Trim and Shower Combination, featuring the shower head, trim, arm, and flange.
Key Features:
- Includes valve trim, Anystream shower head, shower arm, and flange.
- Shower head flow rate: 2.5 Gallons Per Minute (GPM).
- Designed for use with Speakman Pressure Balancing or Thermostatic Valves.
- Valve connection types supported: Sweat and Thread, PEX F1960 Cold-Expansion, or PEX F1807.
2. Important Safety Information
Read all instructions carefully before installation and use. Failure to follow these instructions may result in property damage or personal injury.
- Always turn off the main water supply before beginning any plumbing work.
- If you are unsure about any part of the installation process, consult a qualified plumber.
- Wear appropriate personal protective equipment (PPE) such as safety glasses and gloves during installation.
- Ensure all connections are secure and watertight to prevent leaks.
- Do not use harsh chemicals or abrasive cleaners on the product finish, as this may cause damage.
- Products with flow rates over 1.8 GPM cannot ship into the state of California due to local regulations. Verify local codes before purchase and installation.
3. Package Contents
Verify that all components are present before beginning installation.
- Shower Valve Trim (CPT-1001)
- Neo Anystream 2.5 GPM Shower Head (S-3010)
- Neo Shower Arm (S-2540)
- Flange for Shower Arm
Required Components (Not Included):
- Speakman Pressure Balancing Valve (CPV-PB) or Thermostatic/Pressure Balancing Valve (CPV-TP)
4. Installation Instructions
This section provides general guidance for installing the Speakman SLV-1010 Neo Trim and Shower Combination. Refer to the specific installation manual provided with your chosen Speakman shower valve for detailed valve installation steps.
4.1 Valve Compatibility and Connection Types
The SLV-1010 trim is designed to work with specific Speakman valves. Ensure you have the correct valve for your installation.
- Compatible Valves: Speakman Pressure Balancing Valve (CPV-PB) or Speakman Thermostatic/Pressure Balancing Valve (CPV-TP).
- Connection Types: These valves are available with Sweat and Thread, PEX F1960 Cold-Expansion, or PEX F1807 connections. Select the valve that matches your plumbing system.
4.2 General Installation Steps (Trim Components)
- Prepare the Valve: Install the Speakman shower valve (CPV-PB or CPV-TP) according to its specific instructions. Ensure the valve body is properly secured within the wall and plumbed to the water supply lines.
- Install Shower Arm and Flange:
- Apply plumber's tape to the threaded end of the shower arm.
- Thread the shower arm into the shower outlet pipe in the wall. Tighten securely.
- Slide the shower arm flange over the shower arm until it sits flush against the finished wall.
- Attach Shower Head:
- Apply plumber's tape to the threaded end of the shower arm.
- Thread the Neo Anystream Shower Head onto the shower arm. Hand-tighten, then use a wrench to tighten an additional quarter turn. Do not overtighten.
- Install Valve Trim:
- Follow the instructions provided with your specific Speakman valve trim (CPT-1001) for attaching the escutcheon, handle, and any other trim components to the installed valve body. This typically involves securing a mounting plate, then attaching the decorative trim and handle.
- Test for Leaks: Once all components are installed, slowly turn on the main water supply. Check all connections for leaks. If leaks are detected, turn off the water supply and re-tighten connections as necessary.
5. Operation
The operation of the Speakman SLV-1010 Neo Trim and Shower Combination is controlled by the installed Speakman shower valve. Refer to your valve's specific manual for detailed operating instructions.
5.1 Shower Head Functionality
The Neo Anystream Shower Head (S-3010) features a 2.5 GPM flow rate, providing a consistent water flow for showering. The Anystream technology allows for easy adjustment of spray patterns by rotating the outer ring of the shower head.
6. Maintenance and Care
Proper care and maintenance will ensure the longevity and appearance of your Speakman SLV-1010 Neo Trim and Shower Combination.
- Cleaning: Clean the product regularly with a soft cloth and mild soap and water. Rinse thoroughly and dry with a soft cloth to prevent water spots.
- Avoid Harsh Cleaners: Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, or any cleaners containing bleach, acids, or alcohol. These can damage the polished chrome finish.
- Shower Head Maintenance: Periodically check the shower head nozzles for mineral buildup. If necessary, gently rub the rubber nozzles to dislodge deposits or soak the shower head in a solution of white vinegar and water to remove hard water stains.
7. Troubleshooting
This section addresses common issues you might encounter. For more complex problems, consult a qualified plumber or contact Speakman customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water pressure from shower head | Mineral buildup in shower head nozzles; partially closed shut-off valve; debris in valve. | Clean shower head nozzles. Ensure shut-off valves are fully open. Consult valve manual for cleaning debris. |
| Water leaks from connections | Loose connections; insufficient plumber's tape. | Turn off water supply. Tighten connections. Reapply plumber's tape if necessary. |
| Water temperature issues | Issue with the installed shower valve. | Refer to the troubleshooting section of your Speakman shower valve manual. |
| Shower head drips after turning off | Residual water draining from the shower head and arm. | This is often normal. If dripping persists for an extended period, check valve for issues. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Speakman |
| Model Number | SLV-1010 |
| Color | Polished Chrome |
| Material | Metal, Plastic (Handle Material: Brass) |
| Finish Type | Polished |
| Number of Handles | 1 (on valve trim) |
| Included Components | Shower system (Valve trim, Anystream shower head, shower arm, flange) |
| Shower Head Flow Rate | 2.5 GPM |
| UPC | 671252147333 |
| Manufacturer | Speakman |
9. Warranty Information
The Speakman SLV-1010 Neo Trim and Shower Combination is backed by a Limited Lifetime Warranty. This warranty covers defects in material and workmanship under normal use and service. For full details regarding warranty coverage, terms, and conditions, please refer to the official Speakman warranty documentation or visit the Speakman website.
10. Customer Support
If you require assistance with your Speakman SLV-1010 Neo Trim and Shower Combination, or have questions not covered in this manual, please contact Speakman customer support.
- Website: Visit the official Speakman website for FAQs, product registration, and additional resources.
- Contact: Refer to the Speakman website for current contact information, including phone numbers and email support.