1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Mr. Steam MS-Super1-E Steam Bath Generator. The MS-Super1-E is a 10kW steam generator designed for residential steam showers up to 475 cubic feet, offering a luxurious spa experience. It features durable stainless steel construction, electronic controls, an AromaSteam head for aromatherapy, and the AutoFlush system for enhanced longevity.
2. Safety Information
Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.
- Electrical Safety: Ensure the generator is installed by a qualified electrician in accordance with all local and national electrical codes. Disconnect power before servicing.
- Plumbing Safety: Installation should be performed by a licensed plumber. Ensure all water connections are secure to prevent leaks.
- Steam Hazard: Steam is hot and can cause burns. Exercise caution when using the steam shower. Keep children and individuals with health conditions away from the steam head.
- Ventilation: Ensure adequate ventilation in the installation area as specified by local codes.
3. Package Contents
Verify that all components are present in your Mr. Steam MS-Super1-E package:
- MS-Super1-E Steam Generator Unit (10kW)
- Electronic Control (e.g., iTempo/E-Tempo, specific model may vary)
- AromaSteam Steam Head (Polished Nickel Finish)
- AutoFlush System
- Installation and Operation Manual (this document)
Image of the Mr. Steam MS-Super1-E Steam Bath Generator package, showing the generator unit and associated components.
4. Setup and Installation
The Mr. Steam MS-Super1-E generator is designed for flexible installation in locations such as closets, vanities, or basements, up to 60 feet away from the steam shower enclosure. Professional installation by a licensed electrician and plumber is strongly recommended to ensure compliance with all safety standards and proper functionality.
4.1. Location Requirements
- Choose a dry, accessible location for maintenance.
- Ensure adequate space around the unit for ventilation and servicing.
- The generator must be installed on a level surface.
4.2. Electrical Connections
Connect the generator to a dedicated electrical circuit as per the wiring diagram provided with the unit and local electrical codes. Ensure proper grounding.
4.3. Plumbing Connections
Connect the water supply, steam line, and drain line according to the plumbing diagram. The AutoFlush system requires a connection to the drain.
4.4. Control Installation
Install the electronic control (e.g., iTempo/E-Tempo) inside the steam shower enclosure or at a convenient location outside, following the specific instructions for the control model.
5. Operating Instructions
The Mr. Steam MS-Super1-E is operated via its electronic control panel, such as the iTempo or E-Tempo control. Refer to the specific control's manual for detailed instructions.
5.1. Starting a Steam Session
- Ensure the main power supply to the generator is on.
- Press the 'ON' button on your electronic control.
- Set your desired temperature and duration using the control's interface.
- The generator will begin producing steam after a short pre-heating period.
5.2. Using the AromaSteam Head
The AromaSteam head allows for the integration of aromatherapy into your steam bath. Add a few drops of Mr. Steam essential oils to the reservoir on the steam head before starting your session.
5.3. Ending a Steam Session
The generator will automatically shut off after the set duration. You can manually end a session by pressing the 'OFF' button on the control panel.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Mr. Steam generator.
6.1. AutoFlush System
The integrated AutoFlush system automatically drains the generator tank after each use, reducing mineral buildup and extending the life of the heating elements. No manual intervention is typically required for this process.
6.2. Cleaning the Steam Head
Periodically wipe down the AromaSteam head with a soft, damp cloth to remove any residue. Do not use abrasive cleaners.
6.3. Descaling (if necessary)
While AutoFlush minimizes mineral buildup, in areas with extremely hard water, occasional descaling may be required. Consult a qualified technician or Mr. Steam customer support for descaling procedures.
7. Troubleshooting
If you encounter issues with your Mr. Steam generator, refer to the following common troubleshooting steps. For persistent problems, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| No steam production | No power, water supply off, control not activated, low water level sensor issue. | Check circuit breaker, ensure water supply valve is open, activate control, contact service if sensor suspected. |
| Insufficient steam | Generator undersized for room, mineral buildup, steam line obstruction. | Verify room size vs. generator capacity, consider descaling, check steam line for kinks. |
| Water leak | Loose plumbing connection, faulty component. | Inspect all connections, tighten as needed. If leak persists, contact a plumber or service. |
| Control panel not responding | Power issue, loose connection to generator, control malfunction. | Check power, verify control cable connection, reset power to generator. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Mr. Steam |
| Model Number | MS-Super1-E (Package: MS-Super1-EC1 Betterdf Package) |
| Power Output | 10 kW |
| Maximum Room Size | Up to 475 Cubic Feet |
| Construction Material | Stainless Steel |
| Control Type | Electronic (e.g., iTempo/E-Tempo compatible) |
| Special Features | AromaSteam Head, AutoFlush System |
| UPC | 691032879810 |
| ASIN | B07NVV21BF |
9. Warranty Information
For detailed warranty information regarding your Mr. Steam MS-Super1-E Steam Bath Generator, please refer to the warranty card included with your product or visit the official Mr. Steam website. Keep your proof of purchase for warranty claims.
10. Customer Support
If you require assistance with installation, operation, maintenance, or troubleshooting that is not covered in this manual, please contact Mr. Steam customer service:
- Website: Visit the official Mr. Steam website for support resources, FAQs, and contact information.
- Phone: Refer to the contact details provided on the Mr. Steam website or product packaging.
When contacting support, please have your model number (MS-Super1-E) and serial number ready.