jedi lighting JE700104

jedi lighting iDual LED Table Lamp JE700104

User Manual

1. Introduction

Thank you for purchasing the jedi lighting iDual LED Table Lamp JE700104. This manual provides essential information for the safe and efficient use of your new LED lamp. Please read these instructions carefully before installation and operation, and retain them for future reference.

The jedi lighting iDual LED Table Lamp JE700104 is a modern, energy-efficient lighting solution designed for indoor use, offering versatile illumination with its LED technology and touch control.

2. Safety Instructions

  • Ensure the power supply voltage matches the lamp's requirements before connecting.
  • Do not expose the lamp to water or excessive moisture. This product is for indoor use only.
  • Avoid placing the lamp near heat sources or in direct sunlight, as this may damage components.
  • Do not attempt to disassemble or modify the lamp. This may void the warranty and pose a safety risk.
  • Keep the lamp out of reach of children and pets.
  • If the power cable is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
  • Clean the lamp only with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Package Contents

Please check the package for the following items:

  • 1 x jedi lighting iDual LED Table Lamp JE700104
  • 1 x Power Cable

If any items are missing or damaged, please contact your retailer.

4. Setup

  1. Unpack the Lamp: Carefully remove all components from the packaging. Retain packaging materials for future transport or storage.
  2. Placement: Place the lamp on a stable, flat surface, such as a table or desk. Ensure there is adequate space around the lamp for proper ventilation and to avoid obstruction of light.
  3. Connect Power: Insert the power cable into the lamp's power input port. Then, plug the power cable into a standard electrical outlet.
jedi lighting iDual LED Table Lamp JE700104

Image: The jedi lighting iDual LED Table Lamp JE700104. This image shows the lamp's modern design with a white rounded light head and a grey metal base. The light head is illuminated with a gradient of warm white and pink light, indicating its color-changing capabilities.

5. Operating Instructions

The jedi lighting iDual LED Table Lamp JE700104 features a tactile switch for easy control.

  • Power On/Off: Gently touch the tactile switch located on the lamp to turn the light on or off.
  • Adjusting Light: The iDual system allows for various light settings. Repeatedly touching or holding the tactile switch may cycle through different light colors, brightness levels, or preset scenes. Refer to the specific iDual system guide for detailed instructions on advanced light adjustments, if applicable.

6. Maintenance

  • Cleaning: Disconnect the lamp from the power supply before cleaning. Use a soft, dry, lint-free cloth to wipe the surface of the lamp. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the finish or internal components.
  • LED Light Source: The LED light source in this lamp is designed for long-term use and is not user-replaceable. Do not attempt to replace the LEDs.

7. Troubleshooting

  • Lamp does not turn on:
    • Ensure the power cable is securely plugged into both the lamp and the electrical outlet.
    • Check if the electrical outlet is functioning by plugging in another device.
    • Verify that the tactile switch is being pressed correctly.
  • Light flickers or is dim:
    • Ensure the power connection is stable.
    • If the issue persists, disconnect the lamp for a few minutes and then reconnect it.

If you encounter problems not listed here or if troubleshooting steps do not resolve the issue, please contact customer support or your retailer.

8. Specifications

FeatureSpecification
Brandjedi lighting
Model NumberJE700104
Number of Items1
StyleModern
ColorNeutral
MaterialMetal
Finish TypePolished
Number of Bulbs1
Included ComponentsPower Cable
Shade ColorMulticolor
Shade MaterialPlastic
Light AngleLED
Plug TypeElectric Cable
Switch StyleTactile
Installation TypeTable Mount
Bulb TypeLED
Energy LabelEnergy-saving (LED)
Spare Parts AvailabilityInformation unavailable
Software Updates Guaranteed UntilInformation unavailable
ASINB07NL9V5XY
Date First Available on Amazon.com.beFebruary 27, 2020
Base MaterialMetal
Light Source TypeLED

9. Warranty and Support

Information regarding specific warranty terms for the jedi lighting iDual LED Table Lamp JE700104 was not available in the provided product data. Please refer to the documentation included with your purchase or contact your retailer for warranty details.

For technical support or further assistance, please contact jedi lighting customer service or your point of purchase.

© 2023 jedi lighting. All rights reserved.