1. Product Overview
This manual provides detailed instructions for assembling and maintaining your BANDAI SPIRITS HGBF 1/144 Crossbone Gundam X-1 Full Cloth (Ver. GBF) model kit. This kit is designed for enthusiasts aged 8 and up, offering a rewarding building experience with snap-fit assembly and multi-color runners.
Figure 1.1: Completed Crossbone Gundam X-1 Full Cloth (Ver. GBF) Model Kit.
What's Included:
- Plastic runners containing all parts for the Crossbone Gundam X-1 Full Cloth (Ver. GBF) HGBF model.
- Instruction booklet (this document serves as a digital equivalent).
- Sticker sheet for detailing.
2. Safety Information
WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.
- Keep all small parts and plastic bags away from young children to prevent accidental ingestion or suffocation.
- Use appropriate tools (e.g., plastic nippers) for detaching parts from runners to avoid injury.
- Exercise caution when handling sharp edges or pointed parts.
3. Assembly Instructions
This model kit features snap-fit assembly, requiring no glue. Parts are molded in multiple colors for easy recreation of the mobile suit's appearance.
Required Tools:
- Plastic nippers or hobby knife (recommended for clean cuts).
- Tweezers (optional, for applying small stickers).
Assembly Steps:
- Part Identification: Familiarize yourself with the different runners and parts. Each runner is labeled with a letter, and individual parts have numbers. Refer to the included diagram for part identification.
- Detaching Parts: Carefully detach each part from its runner using plastic nippers. Cut slightly away from the part first, then make a second, closer cut to remove any nubs. Avoid twisting or pulling parts directly from the runner to prevent damage.
Figure 3.1: Carefully detaching parts from the runner.
- Snap-Fit Assembly: Follow the numerical order in the instruction diagram. Align the pegs on one part with the corresponding holes on another part and gently press them together until they snap securely. Do not force parts if they do not fit; recheck the diagram for correct orientation.
- Color Recreation: The kit utilizes multi-color injection molding, allowing for accurate color separation without painting. Observe the different colored parts on the runners.
Figure 3.2: Example of multi-colored runners for easy color recreation.
- Sticker Application: Apply the included stickers to add fine details and markings. Use tweezers for precise placement. Ensure the surface is clean and dry before applying.
- Final Assembly: Once all individual sections (head, torso, arms, legs, weapons, backpack) are assembled, connect them according to the final steps in the diagram.
4. Operating and Display
Once assembled, your Crossbone Gundam X-1 Full Cloth model kit is ready for display and posing. The joints are designed for a range of motion, allowing for dynamic poses.
- Posing: Gently manipulate the joints to achieve desired poses. Avoid excessive force to prevent breakage.
- Accessory Attachment: Attach weapons and other accessories firmly to the designated hardpoints.
- Display: Place the model on a stable surface. Consider using an action base (sold separately) for more dynamic aerial poses.
Figure 4.1: Crossbone Gundam X-1 Full Cloth in an action pose.
Figure 4.2: Crossbone Gundam X-1 Full Cloth showcasing its articulation.
5. Maintenance
Proper care will ensure the longevity and appearance of your model kit.
- Cleaning: Dust the model regularly with a soft brush or a can of compressed air. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the model away from direct sunlight, extreme temperatures, and high humidity to prevent discoloration or material degradation.
- Handling: Handle the model by its main body parts rather than delicate accessories or thin antennas to avoid accidental breakage.
6. Troubleshooting
If you encounter any issues during or after assembly, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Parts do not fit together. | Incorrect part orientation or remaining plastic nubs. | Verify part orientation with the instruction diagram. Carefully trim any remaining nubs from the part. |
| Joints are too loose. | Wear and tear, or slight manufacturing variation. | Apply a thin layer of clear nail polish or hobby cement to the ball joint or peg, let it dry, then reassemble. This can add friction. |
| Parts fall off easily. | Incomplete snap-fit or damaged connection point. | Ensure parts are fully pressed together until they click. If a connection point is damaged, a small amount of plastic cement may be used as a last resort (this is permanent). |
7. Specifications
- Model Name: Gundam Build Fighters Try - #35 Crossbone Gundam X-1 Full Cloth (Ver. GBF) HGBF
- Model Number: 2301522
- Brand: BANDAI SPIRITS
- Scale: 1/144
- Material: Plastic
- Recommended Age: 8 years and up
- Product Dimensions: Approximately 1.65 x 10.7 x 5.98 inches (L x W x H)
- Item Weight: Approximately 12.6 ounces (358 Grams)
- Number of Pieces: 1 (referring to the complete kit, not individual parts)
- Release Date: December 1, 2024
8. Warranty and Support
BANDAI SPIRITS strives to deliver high-quality products. If you encounter any manufacturing defects or missing parts, please contact the retailer where you purchased the product or the official BANDAI SPIRITS customer support in your region.
Please retain your proof of purchase for any support inquiries.
For more information and product updates, visit the official BANDAI SPIRITS website or their Amazon store: BANDAI SPIRITS Store on Amazon.