1. Introduction
Thank you for purchasing the MoriMori W Speaker FWS-1701-GR. This product is a set of two portable Bluetooth speakers equipped with LED lights, designed to deliver an immersive stereo audio experience. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your device. Keep this manual for future reference.
2. Safety Information
To prevent damage to the product or injury to yourself and others, please observe the following safety precautions:
- Do not expose the speakers to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the speakers to strong impacts.
- Do not attempt to disassemble, repair, or modify the speakers. This will void the warranty.
- Use only the provided Micro USB cables for charging.
- Keep out of reach of children.
- Do not operate the speakers in areas where electronic device usage is restricted.
3. Package Contents
Verify that all items are present in the package:
- MoriMori W Speaker (x2)
- Micro USB Charging Cable (x2)
- Dedicated Carrying Case (x1)
- Instruction Manual (this document)
Image: The MoriMori W Speakers, Micro USB cables, and carrying case as they appear when unboxed.
4. Product Overview
Each MoriMori W Speaker features a compact design with integrated controls for both audio and lighting functions.
Image: Front view of two MoriMori W Speakers with LED lights on. Note the power, LED, and Bluetooth buttons.
Controls and Indicators:
- Power Button (ON/OFF): Press and hold to power on/off the speaker.
- LED Button (LED): Press to cycle through LED brightness levels (Low, High, Off).
- Bluetooth Button (Ⓘ): Press and hold to enter pairing mode. Short press to disconnect/reconnect.
- Charging Port: Micro USB port for charging.
- LED Indicator: Shows charging status and Bluetooth connection status.
5. Setup
5.1 Initial Charging
Before first use, fully charge both speakers. Connect the Micro USB charging cables to the charging ports on each speaker and to a 5V-1A USB power adapter (not included). The LED indicator will show charging status and turn off when fully charged. Charging takes approximately 4 hours.
5.2 Powering On/Off
- To power on: Press and hold the Power Button on each speaker until the LED indicator lights up.
- To power off: Press and hold the Power Button on each speaker until the LED indicator turns off.
6. Operating Instructions
6.1 Bluetooth Pairing (Single Speaker)
- Ensure the speaker is powered on.
- Press and hold the Bluetooth Button (Ⓘ) until the LED indicator flashes rapidly, indicating pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "MoriMori W Speaker" from the list.
- Once connected, the LED indicator will stop flashing and remain solid.
6.2 Stereo Pairing (Two Speakers)
To enjoy true wireless stereo sound, pair both speakers together first, then connect them to your device.
- Power on both MoriMori W Speakers.
- Ensure neither speaker is currently connected to any Bluetooth device. If they are, short press the Bluetooth button to disconnect.
- On one speaker (this will be the primary speaker), press and hold the Bluetooth Button (Ⓘ) until the LED indicator flashes rapidly.
- On the second speaker, short press the Bluetooth Button (Ⓘ). The two speakers will automatically attempt to pair with each other.
- Once successfully paired in stereo mode, one speaker's LED will flash slowly (primary), and the other's LED will be solid (secondary).
- Now, on your device, enable Bluetooth and search for available devices.
- Select "MoriMori W Speaker" from the list. Your device will connect to the primary speaker, and audio will play in stereo through both.
6.3 LED Light Operation
Each speaker has an independent LED light function:
- Press the LED Button once for low brightness.
- Press the LED Button a second time for high brightness.
- Press the LED Button a third time to turn the LED light off.
7. Maintenance
Proper care ensures the longevity of your MoriMori W Speakers:
- Clean the speakers with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Store the speakers in their dedicated carrying case when not in use to protect them from dust and scratches.
- Avoid prolonged exposure to direct sunlight or heat sources.
- If the speakers will not be used for an extended period, charge them fully every 3 months to maintain battery health.
8. Troubleshooting
If you encounter issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery. | Charge the speaker fully. |
| Cannot pair with Bluetooth device. | Speaker not in pairing mode; device Bluetooth off; too far from device. | Ensure speaker is in pairing mode (flashing LED). Turn on device Bluetooth. Move closer to the speaker (within 10m). Forget previous connections on your device. |
| No sound or distorted sound. | Volume too low; poor Bluetooth connection; audio source issue. | Increase volume on both speaker and device. Re-pair the speakers. Check audio source. |
| LED light not working. | LED function turned off. | Press the LED button to cycle through brightness levels. |
| Stereo pairing fails. | Speakers already connected to another device; incorrect pairing sequence. | Ensure both speakers are disconnected from all devices. Follow the stereo pairing instructions carefully (Section 6.2). |
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | FWS-1701-GR |
| Communication Method | Bluetooth V4.2 |
| Frequency Range | 200 Hz – 20 kHz |
| Maximum Communication Distance | 10 meters (33 feet) |
| Light Source Type | 2-stage dimmable LED (2700K equivalent) |
| Brightness | 14 lm (maximum) |
| Power Consumption | 5W |
| Charging Method | DC 5V-1A Micro USB |
| Built-in Battery | Lithium-ion rechargeable battery 3.7V 1700mAh |
| Charging Time | Approximately 4 hours |
| Continuous Lighting Time | High brightness: 3 hours, Low brightness: 6 hours |
| Audio Playback Time | 7 hours (at medium volume) |
| Simultaneous Use Time (Light & Audio) | 5 hours (at low brightness, medium volume) |
| Body Size (per speaker) | H112mm x φ75mm (Height x Diameter) |
| Weight (per speaker) | 285g |
| Country of Manufacture | China |
| Compatible Devices | Smartphones, tablets, MP3 players, smart speakers (e.g., Amazon Echo) |
10. Warranty and Support
10.1 Warranty Information
This product comes with a 1-year warranty from the date of purchase. The warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.
10.2 Customer Support
For technical assistance, warranty claims, or any questions regarding your MoriMori W Speaker, please contact your retailer or the MoriMori customer support team. Refer to the contact information provided with your purchase or visit the official MoriMori website for support details.