Costzon Portable 1600W 2-Way Powered PA Speaker System User Manual

1. Introduction

Thank you for purchasing the Costzon Portable 1600W 2-Way Powered PA Speaker System. This system is designed to provide high-quality audio for various applications, including parties, speeches, performances, and social gatherings. It features an active speaker, a passive speaker, a wired microphone, a wireless remote control, and two tripod stands for versatile setup. Please read this manual thoroughly before operating the system to ensure proper use and to maximize its performance and longevity.

This PA system offers multiple connectivity options including Bluetooth, USB, SD card, FM radio, and line inputs, making it a versatile solution for your audio needs.

2. Safety Instructions

• Read all instructions before using the product.
• Retain this manual for future reference.
• Do not expose this equipment to rain or moisture to prevent fire or shock hazards.
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug damage, liquid spillage, or objects falling into the apparatus, or if it has been exposed to rain or moisture, does not operate normally, or has been dropped.

3. Package Contents

Upon unpacking, please verify that all items listed below are present and in good condition:

• 1 x Active PA Speaker
• 1 x Passive PA Speaker
• 1 x Wired Microphone
• 1 x Wireless Remote Control
• 1 x 16ft Speaker Cable (for connecting active to passive speaker)
• 2 x Tripod Speaker Stands
• 1 x Power Cord
• 1 x User Manual

Image: The complete Costzon Portable PA Speaker System package, including two speakers, two tripod stands, a wired microphone, a remote control, and connecting cables.

4. Product Overview

4.1. Speaker Features

The Costzon PA Speaker System includes an active speaker with a built-in amplifier and a passive speaker. Both speakers feature high-power long-throw 10" woofers and high-performance 1" tweeters for optimal sound reproduction. The active speaker houses the control panel and all input/output connections.

Image: A cutaway view of the speaker highlighting the High-Power Long-Throw 10" Woofers and High-Performance 1" Tweeters, which contribute to high-quality sound reproduction.

4.2. Control Panel (Active Speaker)

The active speaker's rear panel provides all the necessary controls and input/output ports. Refer to the diagram below for a detailed overview:

Image: The control panel of the active speaker, showing various inputs, outputs, and adjustment knobs. Key components are numbered for easy identification.

1. SD Card/USB/MIC Input: Slots for SD card and USB drive, and a 6.35mm microphone input.
2. LCD Display & MP3 Player Control: Digital display for mode, track information, and buttons for MP3 playback (Play/Pause, Stop, Next, Previous, Mode).
3. Output Level Control: Adjusts the overall output volume.
4. RCA Phone Line/XLR Line Input: Inputs for connecting external audio sources (e.g., mixer, CD player).
5. 6.35 mm Line Output & 8 ohm Speaker Output: Output to connect to another active speaker or the passive speaker.
6. Treble/Bass Control: Knobs to adjust high and low frequencies for sound equalization.
7. 110V/220V Switch: Voltage selector switch. Ensure this is set correctly for your region before powering on.
8. Power Switch & AC Port: Main power switch and port for the AC power cord.

5. Setup

5.1. Speaker Placement

The speakers can be placed directly on the ground or mounted on the included tripod stands. Using the stands helps to project sound more effectively over a larger area.

• On Ground: Ensure speakers are on a stable, flat surface.
• On Tripod Stands: Extend the tripod legs for stability. Place the speaker onto the pole of the stand and secure it with the locking mechanism. The stands feature three levels of adjustable height from 3.5ft to 4.5ft.

Image: Demonstrates the portable design with side carrying handles and the stable tripod stand with adjustable height, suitable for various setups.

5.2. Connecting Speakers

1. Locate the 16ft speaker cable provided.
2. Connect one end of the speaker cable to the 8 ohm Speaker Output on the active speaker.
3. Connect the other end of the speaker cable to the input port on the passive speaker.

5.3. Power Connection

1. Ensure the 110V/220V Switch on the active speaker is set to the correct voltage for your region.
2. Connect the power cord to the AC Port on the active speaker.
3. Plug the other end of the power cord into a suitable power outlet.
4. Ensure the Power Switch is in the OFF position before plugging into the wall outlet.

6. Operating Instructions

6.1. Powering On/Off

Flip the Power Switch to the ON position to turn on the system. The LCD display will illuminate. To turn off, flip the switch to the OFF position.

6.2. Adjusting Volume and Tone

• Use the Output Level Control knob to adjust the overall volume of the system.
• Use the Treble and Bass control knobs to fine-tune the high and low frequencies of the audio output.

6.3. Bluetooth Connection

This system supports wireless Bluetooth connectivity for streaming audio from compatible devices.

1. Press the Mode button on the control panel or remote control until "Bluetooth" appears on the LCD display.
2. On your Bluetooth-enabled device (smartphone, tablet, laptop), search for available Bluetooth devices.
3. Select "Costzon PA Speaker" (or similar name) from the list.
4. Once paired, you will hear a confirmation tone, and you can now play audio from your device through the speakers.

Image: Illustrates the high compatibility of the speaker system, showing a smartphone, tablet, laptop, iPad, and desktop PC connecting via Bluetooth for audio playback.

6.4. USB/SD Card Playback

The system can play MP3 audio files directly from a USB flash drive or SD card.

1. Insert a USB flash drive into the USB Input or an SD card into the SD Card Input.
2. The system should automatically switch to USB/SD mode and begin playback. If not, press the Mode button to select USB or SD.
3. Use the MP3 player controls (Play/Pause, Next, Previous) on the control panel or remote control to manage playback.

6.5. FM Radio

To use the built-in FM radio function:

1. Press the Mode button until "FM" appears on the LCD display.
2. Press the Play/Pause button to initiate an automatic scan for available radio stations. The system will save found stations.
3. Use the Next/Previous buttons to navigate through the saved stations.

6.6. Microphone Usage

Connect the wired microphone to the MIC Input on the active speaker. Adjust the microphone volume using the dedicated microphone level control (if available, otherwise use the main output level). Ensure the microphone is pointed away from the speakers to prevent feedback.

6.7. Line Input (RCA/XLR)

For connecting external audio devices such as mixers, CD players, or other audio sources:

1. Connect your audio source to the RCA Phone Line Input or XLR Line Input on the active speaker.
2. Press the Mode button to select the appropriate line input.
3. Adjust the volume from your source device and the speaker's Output Level Control.

6.8. Remote Control

The wireless remote control provides convenient access to various functions from a distance, including mode selection, volume adjustment, track control (for USB/SD/Bluetooth), and FM radio functions.

7. Maintenance

• Cleaning: Wipe the speaker cabinets with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Storage: When not in use for extended periods, store the system in a cool, dry place, away from direct sunlight and extreme temperatures.
• Cables: Regularly check all cables for signs of wear or damage. Replace any damaged cables immediately.
• Ventilation: Ensure that the ventilation openings on the active speaker are not blocked to prevent overheating.

8. Troubleshooting

9. Specifications

Image: A visual representation of the speaker dimensions (12" L x 10.5" W x 16.5" H) and the adjustable height range of the tripod stand (3.5' - 4.5').

10. Warranty and Support

Costzon products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or contact Costzon customer support directly. If you encounter any issues or have questions regarding the operation or maintenance of your PA speaker system, please reach out to our customer service team for assistance.

For further support, please visit the official Costzon website or contact their customer service department.