LectroFan Micro 2 Portable Bluetooth Speaker & White Noise Machine User Manual

Introduction

Thank you for choosing the LectroFan Micro 2, a versatile and compact device designed to enhance your sleep, focus, and relaxation. This portable unit combines a Bluetooth speaker with a white noise machine, offering 11 unique non-looping sounds. Its small size and rechargeable battery make it ideal for use at home or while traveling.

This manual provides essential information on setting up, operating, and maintaining your LectroFan Micro 2. Please read it thoroughly before use to ensure optimal performance and safety.

Image: The LectroFan Micro 2 in its upright position, showcasing its compact design and control buttons.

Safety Information

For safe operation of your LectroFan Micro 2, please adhere to the following guidelines:

• Use only with recommended batteries. Do not attempt to open or alter the battery compartment.
• Avoid using the device near water or in adverse weather conditions.
• This product is not a toy. Keep out of reach of children.
• Observe appropriate noise exposure limits to prevent hearing damage.

Product Features

The LectroFan Micro 2 offers a range of features designed for convenience and effective sound masking:

• Noise Masking: Produces soothing sounds to block distracting noises, aiding in sleep, focus, privacy, and relaxation.
• Bluetooth Stereo: Connect wirelessly to your device. Features a built-in microphone for speakerphone functionality. Two Micro 2 units can be paired for stereo sound.
• 11 Non-Looping Sounds: Includes 5 unique fan sounds, 4 white noise variations, and 2 ocean surf sounds.
• Portable Design: Compact and travel-friendly, suitable for various environments including home, camping, and travel.
• Rechargeable Battery: Provides 20-30 hours of operation per charge via USB-C.

Image: Visual representation of the 11 distinct sound options available on the LectroFan Micro 2.

Setup

Follow these steps to prepare your LectroFan Micro 2 for use:

1. Charge the Device: Before first use, fully charge the LectroFan Micro 2 using the provided USB-C to USB-A cable. Connect the USB-C end to the device and the USB-A end to a compatible power adapter (not included) or computer USB port. The charging indicator light will show charging status.
2. Power On: Locate the power switch on the device and slide it to the 'ON' position.

Image: The LectroFan Micro 2 connected to a USB-C charging cable.

Operating Instructions

Sound Selection and Volume Control

1. Select Sound: Press the sound selection button (often marked with a musical note or wave icon) to cycle through the 11 available sounds: 5 fan sounds, 4 white noise variations, and 2 ocean surf sounds.
2. Adjust Volume: Use the volume up (+) and volume down (-) buttons to set your desired sound level. The device offers precise volume control.
3. Directional Sound: The top speaker portion of the LectroFan Micro 2 can swivel, allowing you to direct the sound output as needed.

Bluetooth Pairing

To use the LectroFan Micro 2 as a Bluetooth speaker:

1. Activate Bluetooth: Ensure the device is powered on. The Bluetooth indicator light will flash, indicating it's in pairing mode.
2. Pair with Device: On your smartphone or other Bluetooth-enabled device, go to Bluetooth settings and select "LectroFan Micro 2" from the list of available devices.
3. Confirmation: Once paired, the Bluetooth indicator light will become solid, and you will hear an audible confirmation. You can now stream audio or use the built-in microphone for calls.

Image: A LectroFan Micro 2 paired with a smartphone, demonstrating its Bluetooth speaker functionality.

Stereo Pairing (with two LectroFan Micro 2 units)

For an enhanced audio experience, you can pair two LectroFan Micro 2 units together for stereo sound:

1. Ensure both LectroFan Micro 2 units are powered on and not currently paired with any other device.
2. Follow the specific instructions provided with your devices for initiating stereo pairing mode. This usually involves a specific button press sequence on both units.
3. Once paired, connect your audio source to one of the LectroFan Micro 2 units via Bluetooth as described above. Audio will then play in stereo through both units.

Charging and Battery Life

The LectroFan Micro 2 features a built-in rechargeable battery. A full charge provides approximately 20-30 hours of continuous use, depending on volume level and sound mode.

• To charge, connect the included USB-C cable to the device and a USB power source.
• The charging indicator light will illuminate during charging and change color or turn off when fully charged.
• For optimal battery longevity, avoid completely draining the battery frequently.

Maintenance

To ensure the longevity and proper functioning of your LectroFan Micro 2:

• Cleaning: Wipe the device with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Storage: Store the device in a cool, dry place when not in use. If storing for extended periods, ensure the battery is partially charged.
• Avoid Extreme Conditions: Do not expose the device to extreme temperatures, direct sunlight, or high humidity.

Troubleshooting

Specifications

Note: The original product specifications mentioned "1 LR44 batteries required. (included)" which contradicts the "Rechargeable via USB-C" feature. Based on product description, the device operates on an internal rechargeable battery.

Warranty and Support

For warranty information, technical support, or customer service inquiries, please refer to the official LectroFan website or contact Adaptive Sound Technologies directly. Details are typically provided with your product packaging or on the manufacturer's website.

Online resources may include FAQs, troubleshooting guides, and contact forms for assistance.