Boston Tech BE-106 Paraffin Wax for Hand and Foot Treatment

1. Introduction

The Boston Tech BE-106 Paraffin Wax is designed for therapeutic and cosmetic treatments of hands and feet. This product provides deep therapeutic heat, which is beneficial for reducing stiffness, alleviating pain, and accelerating tissue recovery. It is particularly effective for conditions such as arthritis, osteoarthritis, rheumatism, muscle pain, fibromyalgia, chronic inflammation, blood circulation problems, tendonitis, sprains, and limited joint mobility.

This paraffin wax is intended for use with a compatible paraffin wax warmer. Please refer to your warmer's instruction manual for specific device operation details.

Image 1: Key features of Boston Tech BE-106 Paraffin Wax, highlighting its melting point, quantity per block, orange aroma, reusability up to 4 times, therapeutic benefits, hydrating properties, ease of removal, and high viscosity.

2. Safety Information

WARNING: Paraffin wax is flammable. Risk of burns; do not use near open flames or other ignition sources.

• Always ensure the paraffin wax warmer is placed on a stable, heat-resistant surface.
• Do not leave the warmer unattended while in use.
• Keep out of reach of children and pets.
• Before dipping, always test the wax temperature on a small area of your skin (e.g., wrist) to ensure it is comfortable and not too hot.
• Do not apply wax to broken, irritated, or sensitive skin. Consult a physician if you have any skin conditions or circulatory problems.
• Ensure hands or feet are clean and dry before application.

3. Package Contents

Your Boston Tech BE-106 Paraffin Wax package includes:

• 6 blocks of 450g reusable paraffin wax with Orange scent.

Image 2: The Boston Tech BE-106 Paraffin Wax package containing six blocks of orange-scented wax.

4. Setup

To prepare the paraffin wax for treatment, follow these steps:

1. Place the paraffin wax blocks into a suitable paraffin wax warmer.
2. The melting point of the wax is approximately 48-50°C. Set your warmer's temperature to 70°C for initial melting.
3. Allow the wax to fully melt. This may take some time depending on your warmer model.
4. Once melted, reduce the temperature to a comfortable level for application, typically around 50-55°C. Always test the temperature before use.

Image 3: A close-up view of the orange paraffin wax block, indicating its scent.

5. Operating Instructions

Follow these steps for an effective paraffin wax treatment:

1. Clean Hands/Feet: Ensure your hands or feet are thoroughly clean and dry before starting the treatment.
2. Insert Grid: Place the protective grid at the bottom of the wax warmer to prevent direct contact with the heating element.
3. Dip into Wax: Slowly dip your hand or foot into the melted paraffin wax for 20-30 seconds. Carefully remove and allow the wax to solidify slightly. Repeat this process 5-7 times to build a thick, even layer of wax. Alternatively, use a brush for application, repeating 5-7 times for a thick layer.
4. Cover: Immediately after applying the final layer of wax, cover your treated hand or foot with a disposable plastic glove, followed by a cotton glove or mitt to retain heat.
5. Wait: Keep the gloves/mitts on for approximately 15 minutes to allow the heat and moisturizing properties to penetrate the skin.
6. Remove Wax: After 15 minutes, remove the cotton glove/mitt and then the disposable plastic glove, peeling off the dried wax along with it. Discard the used wax.
7. Moisturize: Apply a nourishing hand or foot cream to your skin to lock in moisture and enhance the treatment's benefits.

Instructional Video: Paraffin Wax Application

Video 1: A step-by-step guide demonstrating the application of paraffin wax for hand treatment, including melting, dipping, and removal. This video is provided by the seller.

6. Maintenance

• Wax Reusability: The Boston Tech BE-106 paraffin wax can be reused up to 4 times. After each use, allow the wax to cool and solidify. Once solidified, it can be stored in a clean, dry container.
• Storage: Store unused or solidified wax in a cool, dry place away from direct sunlight and heat sources.
• Warmer Cleaning: Regularly clean your paraffin wax warmer according to its specific instructions to ensure hygiene and optimal performance.

7. Troubleshooting

If you encounter any issues during the use of your paraffin wax, consider the following:

• Wax not melting: Ensure your paraffin warmer is plugged in, turned on, and set to the correct melting temperature (e.g., 70°C). Allow sufficient time for the wax to melt completely.
• Wax too hot/cold: Always test the wax temperature before application. Adjust your warmer's thermostat to achieve a comfortable and safe temperature (typically 50-55°C for application).
• Wax not adhering well: Ensure your hands or feet are clean and completely dry before dipping. Any moisture or oils can prevent proper wax adhesion.

For issues related to your paraffin wax warmer, please consult its specific instruction manual or contact the warmer's manufacturer.

8. Specifications

9. Warranty and Support

Boston Tech products are generally backed by a 3-year warranty. For specific warranty claims or technical support regarding your paraffin wax or other Boston Tech products, please refer to the official Boston Tech website or contact their customer service directly.