Fityle 45cm Human Spine Model Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Fityle 45cm Human Spine Model. This life-size anatomical model is designed for educational and demonstrative purposes, offering a highly detailed representation of the human vertebral column with pelvis.

The model features all major characteristics of each spine section, including the spinal column, nerve roots, vertebral arteries, intervertebral discs, transverse processes, and a cross-section of the spine, along with the femur. Its design allows for demonstration of correct and incorrect postures, as well as pathological misalignments, with color-coded regions for enhanced learning.

Product Overview

Figure 1: The Fityle 45cm Human Spine Model, showcasing the full vertebral column with the attached pelvis and femur heads, mounted on its stable base.

Figure 2: A detailed view of the upper sections of the spine model, highlighting the color-coded cervical and thoracic vertebrae and nerve roots.

Figure 3: Frontal perspective of the spine model, illustrating the overall structure and proportions.

Figure 4: Detailed view of the lumbar region and pelvis, showing the articulation points and the base attachment.

Figure 5: Lateral view of the spine model, demonstrating the natural curvature and the placement of the nerve roots.

Figure 6: An alternative lateral view, providing a comprehensive look at the model's flexibility and detailed structure.

Figure 7: Close-up of the mid-thoracic spine, showing the intricate details of the vertebrae and intervertebral discs.

Figure 8: An angled perspective of the model, emphasizing its three-dimensional accuracy and educational utility.

Setup Instructions

The Fityle 45cm Human Spine Model comes partially assembled for ease of transport. Follow these steps to set up your model:

1. Unpacking: Carefully remove all components from the packaging. Ensure you have the spine model, the pelvis attachment, and the display stand.
2. Attaching the Spine to the Pelvis: The spine is typically pre-attached to the pelvis. If separated, align the base of the sacrum (lower end of the spine) with the corresponding attachment point on the pelvis. Gently push until it clicks securely into place.
3. Mounting on the Stand: Insert the metal rod of the display stand into the designated hole at the base of the pelvis. Ensure the model is stable and upright on the stand.
4. Placement: Place the assembled model on a flat, stable surface to prevent accidental tipping.

Note: The model is designed to be flexible. Handle with care during setup to avoid excessive bending or stress on the joints.

Operating and Demonstration

This anatomical model is designed for interactive learning and demonstration. Its flexible nature allows for various educational applications:

• Flexibility: The model can be gently bent and articulated to demonstrate the natural movements of the human spine, including flexion, extension, lateral flexion, and rotation. This feature is particularly useful for illustrating spinal mechanics and posture.
• Pathological Demonstrations: Utilize the model to show common spinal conditions such as scoliosis, lordosis, and kyphosis by gently manipulating the spine into the desired curvature. The color-coded regions can assist in identifying specific sections affected by these conditions.
• Nerve Root and Artery Visualization: The detailed nerve roots and vertebral arteries are clearly visible, allowing for discussion and demonstration of their anatomical positions relative to the vertebrae and intervertebral discs.
• Intervertebral Discs: The intervertebral discs are represented to show their cushioning role and can be used to explain concepts like disc herniation (though the model itself does not simulate herniation, it provides the anatomical context).

Caution: While flexible, avoid extreme or forceful bending that could damage the internal structure or connections. Always return the model to a neutral, upright position when not in use for prolonged periods.

Maintenance

Proper care and maintenance will ensure the longevity and educational value of your Fityle Human Spine Model:

• Cleaning: Clean the model regularly with a soft, damp cloth. For stubborn marks, a mild soap solution can be used. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the PVC material and painted surfaces.
• Storage: Store the model in a cool, dry place, away from direct sunlight and extreme temperatures. Prolonged exposure to heat or cold can affect the PVC material's integrity and flexibility.
• Handling: Always handle the model by its base or the main spinal column. Avoid lifting or carrying it by individual nerve roots or delicate processes.
• Inspection: Periodically inspect the model for any signs of wear, cracks, or loose components. Address any issues promptly to prevent further damage.

Troubleshooting

This section addresses common issues you might encounter with your spine model:

Product Specifications

• Brand: F Fityle
• Model Number: B07MPZQCMJ (Manufacturer Part Number: 941267bca8ec9e65e5862c1f061c8c70)
• Material: PVC
• Color: As Pictures Shown (Color-coded regions for cervical, thoracic, lumbar, sacral, and coccygeal spine)
• Height: Approximately 45 cm (17.7 inches)
• Base Dimensions (L x W x H): Approximately 13 x 12 x 45 cm (5.1 x 4.7 x 17.7 inches)
• Package Includes: 1 Human Spine Model (with base)
• Batteries Required: No
• Recommended Age Range: Adult (for educational use)

Warranty and Support

For information regarding warranty coverage or technical support for your Fityle 45cm Human Spine Model, please refer to the purchase documentation or contact your retailer. Keep your proof of purchase for any warranty claims.

For general inquiries or further assistance, you may also visit the official Fityle brand website or contact their customer service department.