Cecotec Coffee 66 Smart Drip Coffee Maker User Manual

1. Introduction

Welcome to the user manual for your new Cecotec Coffee 66 Smart Drip Coffee Maker. This appliance is designed to provide you with delicious coffee with convenience and advanced features. Please read this manual thoroughly before first use to ensure proper operation, maintenance, and safety.

Important Safety Instructions

• Read all instructions carefully before operating the appliance.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against fire, electric shock, and injury to persons, do not immerse cord, plugs, or coffee maker in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner.
• The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
• Do not use appliance for other than intended use.
• The glass carafe is designed for use with this coffee maker. It must never be used on a range top.
• Do not place a hot carafe on a cold or wet surface.
• Do not use a cracked carafe or a carafe having a loose or weakened handle.
• Do not clean carafe with cleansers, steel wool pads, or other abrasive material.

2. Product Components

Familiarize yourself with the parts of your Cecotec Coffee 66 Smart Drip Coffee Maker:

Figure 2.1: Overview of the Cecotec Coffee 66 Smart Drip Coffee Maker, showcasing its sleek design, digital display, and accompanying coffee beans and pastries.

• Main Unit with Control Panel and Digital Display
• Glass Carafe (1.5 liters capacity, up to 12 cups)
• Water Tank with Level Window
• Permanent Filter (removable and washable)
• Filter Holder
• Measuring Spoon
• Heating Plate

3. Setup

Initial Setup and First Use

Before using your coffee maker for the first time, follow these steps to clean the internal components:

1. Unpack the coffee maker and remove all packaging materials.
2. Wash the glass carafe, permanent filter, and filter holder in warm, soapy water. Rinse thoroughly and dry.
3. Fill the water tank with clean water up to the MAX level.


Figure 3.1: Filling the water tank. The transparent window allows for easy monitoring of the water level.

4. Place the permanent filter (or a paper filter) into the filter holder, and then place the filter holder into the coffee maker. Do not add coffee grounds for this initial cleaning cycle.
5. Place the empty glass carafe on the heating plate.
6. Plug the coffee maker into a power outlet.
7. Run two full brewing cycles with only water to clean the internal system. Discard the water after each cycle.
8. Your coffee maker is now ready for use.

4. Operating Instructions

Brewing Coffee

Follow these steps to brew a fresh pot of coffee:

1. Open the top lid and fill the water tank with fresh, cold water to the desired level, indicated by the cup markings on the side. The water level window allows you to control the water level at all times.


Figure 4.1: Close-up of the water tank with its clear level indicator, showing the maximum fill line for 12 cups.

2. Place the permanent filter into the filter holder. Add the desired amount of ground coffee using the provided measuring spoon. A general recommendation is one scoop per cup, or adjust to your taste for intensity.


Figure 4.2: Adding ground coffee into the reusable filter basket, ensuring proper placement for brewing.

3. Close the top lid and ensure the glass carafe is correctly placed on the heating plate.
4. Press the power button to start the brewing process. The coffee maker will begin brewing.
5. Once brewing is complete, the coffee maker will automatically switch to the "Keep Warm" function.

Programming the Coffee Maker (24-hour timer)

The 24-hour programmable timer allows you to set the coffee maker to automatically start brewing at a desired time.

1. First, set the current time on the digital display using the "HOUR" and "MINUTE" buttons.


Figure 4.3: The digital control panel, highlighting the 24-hour programming feature for scheduled brewing.

2. Prepare the coffee maker with water and coffee grounds as described in the "Brewing Coffee" section.
3. Press and hold the "PROGRAM" button (usually indicated by a clock icon) for approximately 3 seconds until the display flashes, indicating programming mode.
4. Use the "HOUR" and "MINUTE" buttons to set the desired start time for brewing.
5. Press the "PROGRAM" button again to confirm the setting. The display will show the current time, and a small indicator light (e.g., "PROG") will illuminate to confirm the timer is set.
6. The coffee maker will automatically start brewing at the programmed time.

ExtremeAroma Technology

This technology enhances the coffee flavor through a continuous dripping and spraying process, ensuring a more intense aroma and taste. Activate this function by pressing the dedicated "Intense Aroma" button (if available, refer to your specific model's button layout) or it may be an automatic part of the brewing cycle.

Keep Warm Function

After brewing, the coffee maker's heating plate will automatically keep the coffee warm for approximately 40 minutes. After this period, the appliance will automatically shut off for safety and energy saving.

5. Maintenance and Cleaning

Daily Cleaning

Regular cleaning ensures optimal performance and taste:

• Always unplug the coffee maker and allow it to cool completely before cleaning.
• Remove the permanent filter and filter holder. Discard used coffee grounds.
• Wash the glass carafe, permanent filter, and filter holder in warm, soapy water. Rinse thoroughly and dry. These parts are generally dishwasher safe on the top rack, but hand washing is recommended for longevity.
• Wipe the exterior of the coffee maker with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.
• Do not immerse the main unit, cord, or plug in water or any other liquid.

Descaling (AutoClean Function)

Mineral deposits from water can build up over time, affecting performance and coffee taste. The AutoClean function helps with descaling. It is recommended to descale your coffee maker approximately every 4 months, or more frequently if you have hard water.

1. Fill the water tank with a mixture of water and descaling solution (or white vinegar). Follow the descaling solution manufacturer's instructions for ratios, or use a 1:2 ratio of white vinegar to water.
2. Place the empty glass carafe on the heating plate.
3. Press the "AutoClean" button (often the first button from the bottom, as per user reviews) to start the descaling cycle. This cycle is designed to clean the machine and improve descaling processes.
4. After the cycle is complete, discard the descaling solution.
5. Run two full cycles with fresh, clean water to rinse out any remaining descaling solution.

6. Troubleshooting

If you encounter any issues with your coffee maker, refer to the table below for common problems and solutions:

7. Specifications

Key technical specifications for the Cecotec Coffee 66 Smart Drip Coffee Maker:

8. Warranty and Support

Warranty Information

Your Cecotec Coffee 66 Smart Drip Coffee Maker comes with a three-year warranty against manufacturing defects. Please retain your proof of purchase for warranty claims. This warranty covers defects in materials and workmanship under normal use and service.

Customer Support

For technical assistance, warranty claims, or any questions regarding your product, please contact Cecotec customer support. Refer to the official Cecotec website or your purchase documentation for the most up-to-date contact information.

When contacting support, please have your model number (01555) and proof of purchase ready.