1. Introduction
This manual provides detailed instructions for the safe and effective operation of your SAHAUHY IGB-P18 18x1W RGBW LED Stage Light. Please read this manual thoroughly before use and retain it for future reference. This device is designed for stage lighting, event lighting, and decorative illumination.
2. Safety Information
- Ensure the power supply voltage matches the device's requirements (240V).
- Do not open the housing; there are no user-serviceable parts inside. Refer all servicing to qualified personnel.
- Avoid direct eye exposure to the light source.
- Keep the device away from water, moisture, and high temperatures.
- Ensure proper ventilation to prevent overheating. Do not block ventilation openings.
- Always disconnect from power before cleaning or maintenance.
- Use only the provided power cord and accessories.
3. Package Contents
Verify that all items are present in your package:
- SAHAUHY IGB-P18 LED Stage Light Unit(s)
- Remote Control (requires 1 CR2 battery, included)
- Power Cable
- Instruction Manual
4. Product Overview
The SAHAUHY IGB-P18 features 18x1W RGBW LEDs, offering a wide range of color mixing possibilities. It includes a sturdy bracket for versatile mounting and a digital display for mode selection and DMX addressing.
Figure 4.1: Multiple SAHAUHY IGB-P18 LED Stage Light units with their remote controls.
Figure 4.2: Product dimensions showing a width of 4.52 inches, height of 3.34 inches, and a cable length of 39.37 inches.
Figure 4.3: Detailed view of the rear panel, highlighting the four-digit display, DMX IN and DMX OUT ports, 18 LED lights, and the bracket adjustment knob.
5. Setup
5.1 Mounting
The integrated bracket allows for various mounting options:
- Floor Stand: Position the light on a flat, stable surface.
- Truss Mounting: Secure the bracket to a lighting truss using appropriate clamps (not included). Ensure the fixture is securely fastened.
- Wall/Ceiling Mounting: Attach the bracket to a wall or ceiling using suitable hardware (not included). Ensure the mounting surface can support the weight of the fixture.
5.2 Power Connection
Connect the provided power cable to the power input on the rear of the light unit and then to a compatible power outlet (240V). Ensure the connection is secure.
6. Operating Modes
The SAHAUHY IGB-P18 offers multiple operating modes, which can be selected via the remote control or the unit's digital display and buttons.
Figure 6.1: Examples of Red, Green, Blue, and White light output from the RGBW LED Par Light.
6.1 Auto Mode
In Auto Mode, the light cycles through pre-programmed patterns and color changes automatically. This mode is ideal for continuous, dynamic lighting effects without manual intervention.
6.2 Sound Activated Mode
The Sound Activated Mode allows the light to react to ambient sound or music. The light patterns and color changes will synchronize with the beat, creating an interactive visual experience.
6.3 Static Color Mode
Select a single, fixed color (Red, Green, Blue, White, or mixed colors) to maintain a consistent ambiance.
6.4 Jump Mode
Colors change abruptly from one to another, creating a sharp, energetic effect.
6.5 Fade Mode (The Gradient)
Colors smoothly transition from one to another, providing a gradual and subtle lighting change.
6.6 Pulse Variable Mode
The light intensity or color pulses, creating a rhythmic effect.
6.7 Manual Dimming
Adjust the overall brightness of the light output.
7. Remote Control Functions
The included remote control provides convenient access to various functions and modes.
Figure 7.1: Remote control layout with buttons for On/Off, Sound, Auto, Manual Dimming, Jump, Pulse Variable, The Gradient (Fade), DMX Console Mode, Functional Speed Adjust, and Flash Color/Speed Selection.
- On/Off: Powers the unit on or off.
- Sound: Activates Sound Activated Mode.
- Auto: Activates Auto Mode.
- Manual Dimming: Adjusts brightness.
- Jump: Activates Jump Mode.
- Pulse Variable: Activates Pulse Variable Mode.
- The Gradient (Fade): Activates Fade Mode.
- DMX Console Mode: Switches to DMX control.
- Functional Speed Adjust (+/-): Increases or decreases the speed of dynamic modes (Jump, Fade, Pulse).
- Flash Color Selection: Cycles through flash colors.
- Flash Speed Selection: Adjusts the speed of flash effects.
8. DMX Control
The IGB-P18 supports DMX control, allowing integration with professional lighting consoles. It operates using an 8-channel DMX protocol.
8.1 DMX Connection
Use standard 3-pin DMX cables to connect the light unit to a DMX controller or other DMX-compatible devices. Connect the DMX OUT of your controller to the DMX IN of the first light unit. For multiple units, daisy-chain them by connecting the DMX OUT of the first unit to the DMX IN of the second, and so on.
8.2 DMX Addressing
Set the DMX address for each unit using the digital display and buttons on the rear panel. Each unit requires a unique starting address to be controlled independently.
8.3 DMX Channel Functions (8-Channel Mode)
Refer to the specific DMX channel chart for detailed control over Red, Green, Blue, White intensity, strobe, master dimmer, and various program selections. This chart is typically provided with the DMX controller or can be found on the manufacturer's website.
9. Maintenance
9.1 Cleaning
Regularly clean the lens and housing with a soft, lint-free cloth. For stubborn dirt, use a mild glass cleaner. Ensure the unit is unplugged before cleaning.
9.2 Storage
When not in use, store the light in a dry, dust-free environment. Disconnect all cables and pack the unit securely to prevent damage.
10. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not power on. | No power supply; faulty cable; unit malfunction. | Check power connection and outlet. Try a different power cable. If problem persists, contact support. |
| No light output. | Dimmer set to minimum; mode not active; DMX issue. | Increase brightness. Select an active mode. Check DMX connection and address. |
| Remote control not working. | Battery depleted; obstruction; remote out of range. | Replace CR2 battery. Ensure clear line of sight to the light's sensor. Move closer to the unit. |
| Light flickers or behaves erratically. | Unstable power; DMX signal interference; internal issue. | Ensure stable power supply. Check DMX cabling for damage. If problem persists, contact support. |
11. Specifications
- Model: IGB-P18
- Light Source: 18 x 1W RGBW LEDs
- Dimensions: 11.48 x 8.48 x 9.5 cm (approx. 4.52 x 3.34 x 3.74 inches)
- Weight: 4.1 kg (approx. 9 lbs)
- Power Source: Corded Electric
- Voltage: 240 Volts
- DMX Channels: 8-channel mode
- Control Modes: Auto, Sound Activated, DMX, Static Color, Jump, Fade, Pulse, Manual Dimming
- Remote Control Battery: 1 x CR2 (included)
12. Warranty and Support
For warranty information or technical support, please refer to the purchase documentation or contact your retailer. Keep your proof of purchase for any warranty claims.
