52TOYS BeastBOX BB-07 Behemoth Original

1. Product Overview

The 52TOYS BeastBOX BB-07 Behemoth Original is a collectible transforming figure. It is designed to convert between a compact cube form and a detailed robotic rhino form. This manual provides instructions for assembly, transformation, and care of your Behemoth figure.

The figure is constructed from PVC and ABS materials, featuring metal axes for durability and smooth articulation during transformation.

Image 1.1: The Behemoth figure in its compact cube form, demonstrating its small size (approximately 2.1 inches or 5 cm).

2. Package Contents

Please verify that all items listed below are included in your package:

• 1x BeastBOX BB-07 Behemoth transforming figure
• 2x Animal guns (accessories)
• 2x Adaptors (for accessories)
• 1x Storage box

Image 2.1: All included components: the Behemoth figure, two animal-themed guns, two adaptors, and a clear display/storage box.

3. Initial Setup

1. Carefully remove all components from the packaging.
2. Inspect the figure and accessories for any visible damage or missing parts. If any issues are found, please refer to the 'Warranty and Support' section.
3. Familiarize yourself with the figure in its initial cube form.

4. Transformation Instructions

The BeastBOX BB-07 Behemoth transforms between a cube and a robotic rhino. Always handle the figure with care during transformation to avoid damage to joints or parts. It is recommended to follow these steps carefully, especially during the first transformation.

4.1. Cube to Robotic Rhino Form

1. Begin with the figure in its compact cube form.
2. Carefully unfold the side panels to reveal the limbs.
3. Extend the front and rear sections to form the body and tail.
4. Rotate and position the legs and feet to achieve the robotic rhino stance. Ensure all joints click securely into place.
5. Adjust the head and horn components as needed.

Image 4.1: The Behemoth figure in its initial cube configuration.

Image 4.2: The Behemoth figure fully transformed into its robotic rhino mode.

4.2. Robotic Rhino to Cube Form

1. Begin with the figure in its robotic rhino form.
2. Carefully retract and fold the head and tail sections.
3. Fold the legs and feet inward, ensuring they align with the body panels.
4. Close the side panels, ensuring all parts are neatly tucked away to form a perfect cube. Apply gentle pressure until all latches engage.

5. Operating the Figure

5.1. Attaching Accessories

The BB-07 Behemoth comes with two animal guns and two adaptors. These can be attached to the figure in its robotic form:

• Identify the attachment points on the figure, typically on the sides or back.
• Use the adaptors if necessary to secure the animal guns firmly into the designated ports.

5.2. Posing

Once in robotic form, the figure has multiple articulation points. Gently adjust the limbs, head, and body to create various poses. Avoid forcing joints beyond their natural range of motion.

6. Care and Maintenance

• Cleaning: Use a soft, dry cloth to gently wipe the figure. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by immediate drying. Avoid harsh chemicals or abrasive materials.
• Storage: When not in use, store the figure in its cube form within the provided storage box. Keep it in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation.
• Handling: Always handle the figure by its main body parts. Avoid gripping small, delicate components tightly during transformation or posing.

7. Troubleshooting

• Difficulty Transforming: If the figure is stiff or difficult to transform, ensure all previous steps are completed correctly. Do not force parts. Check for any misaligned tabs or panels that might be obstructing movement. Sometimes, a gentle wiggle or slight adjustment can help align parts.
• Parts Not Fitting Securely: Ensure all parts are fully extended or retracted as required for each form. Verify that no small accessories are interfering with the transformation process.
• Loose Joints: Over time, joints may become slightly loose. This is generally part of normal wear. If a joint becomes excessively loose, contact customer support for advice.

8. Product Specifications

9. Warranty and Support

For warranty information, product support, or to report any issues with your 52TOYS BeastBOX BB-07 Behemoth Original figure, please contact the manufacturer directly through their official website or the retailer from whom the product was purchased. Keep your proof of purchase for any warranty claims.