AVIOT TE-D01D Bluetooth 5.0 IPX4 Wireless Earbuds User Manual

Introduction

This manual provides essential information for the safe and effective use of your AVIOT TE-D01D Bluetooth 5.0 IPX4 Wireless Earbuds. Please read these instructions carefully before using the product and retain them for future reference.

Package Contents

Verify that all items are present in your product package:

• AVIOT TE-D01D Wireless Earbuds (Left and Right)
• Charging Case
• Micro USB Charging Cable (1 pc)
• Standard Eartips (S/M/L sizes, 1 pair of each)
• Ear Wings (S/M sizes, 1 pair of each)
• Storage Pouch
• User Manual (this document)
• Warranty Card

Product Overview

Familiarize yourself with the components of your AVIOT TE-D01D earbuds.

The AVIOT TE-D01D wireless earbuds and their charging case, showcasing the compact design and red finish.

A woman wearing the AVIOT TE-D01D earbuds, demonstrating their in-ear fit and discreet profile.

A woman wearing the AVIOT TE-D01D earbuds, showcasing their ergonomic design for comfortable wear during sports and IPX4 water resistance.

Setup

1. Charging the Earbuds and Case

1. Place the earbuds into the charging case. Ensure they are correctly seated to initiate charging.
2. Connect the Micro USB charging cable to the charging port on the case and to a USB power source.
3. The indicator lights on the case will show the charging status. A full charge for both earbuds and case takes approximately 2 hours.

The charging case has a battery capacity of 1800 mAh, and each earbud has a 50 mAh battery.

The AVIOT TE-D01D charging case connected via a Micro USB cable, demonstrating its 1800 mAh battery capacity and ability to charge a smartphone.

2. Bluetooth Pairing

1. Initial Pairing: Open the charging case. The earbuds will automatically enter pairing mode.
2. On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
3. Select "AVIOT TE-D01D" from the list of found devices.
4. Once connected, a confirmation sound or indicator will signify successful pairing.

The earbuds support Bluetooth version 5.0 and multi-pairing with up to 3 devices.

A woman wearing the AVIOT TE-D01D earbuds, emphasizing the stable Bluetooth connection provided by the QCC3026 chip, even in challenging environments.

Operating Instructions

Power On/Off

• Power On: Open the charging case, and the earbuds will automatically power on.
• Power Off: Place the earbuds back into the charging case and close the lid. They will automatically power off and begin charging.

Music Playback

The earbuds feature touch controls for managing music playback.

• Play/Pause: Tap once on either earbud.
• Next Track: Double-tap the right earbud.
• Previous Track: Double-tap the left earbud.
• Volume Up: Triple-tap the right earbud.
• Volume Down: Triple-tap the left earbud.

Call Management

Manage phone calls using the touch controls.

• Answer/End Call: Tap once on either earbud.
• Reject Call: Press and hold either earbud for 2 seconds.
• Activate Voice Assistant: Press and hold either earbud for 3 seconds (when not on a call).

Multi-pairing

The AVIOT TE-D01D supports connecting to up to 3 devices simultaneously. To switch between paired devices, ensure Bluetooth is active on the desired device and select the earbuds from its Bluetooth menu. The earbuds will automatically connect to the last active device.

Maintenance

Cleaning

• Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
• Remove eartips and ear wings for separate cleaning. Use a mild soap solution if necessary, then rinse and dry thoroughly before reattaching.
• Avoid using harsh chemicals, aerosols, or abrasive cleaners.

Storage

• When not in use, store the earbuds in their charging case to protect them and keep them charged.
• Store the product in a cool, dry place, away from extreme temperatures and direct sunlight.

Troubleshooting

• No Sound/Low Volume:
  • Ensure earbuds are charged.
  • Check device volume and earbud volume.
  • Ensure earbuds are properly paired and connected to your device.
  • Try re-pairing the earbuds.
• Earbuds Not Pairing:
  • Ensure both earbuds are out of the case and in pairing mode.
  • Turn off Bluetooth on other nearby devices to avoid interference.
  • Forget the device from your phone's Bluetooth settings and try pairing again.
• Charging Issues:
  • Ensure the charging cable is securely connected to both the case and the power source.
  • Check if the charging port is clean and free of debris.
  • Try a different Micro USB cable or power adapter.
• Intermittent Connection:
  • Ensure your device is within the effective Bluetooth range (typically 10 meters/33 feet).
  • Avoid physical obstructions between the earbuds and your device.
  • Minimize interference from other wireless devices.

Specifications

A woman wearing the AVIOT TE-D01D earbuds, illustrating the extended playback time of up to 100 hours with the charging case.

Warranty and Support

Your AVIOT TE-D01D earbuds come with a warranty. Please refer to the included warranty card for details regarding coverage and duration. In case of product malfunction, loss of an earbud, or damage to the charging case, please contact AVIOT customer support or your retailer for assistance. Replacement services may be available under specific conditions during the warranty period.

An icon representing warranty service, indicating support for earbud loss or charging case damage within the warranty period.