Product Instruction Manual

Product Overview

This manual provides detailed instructions for the installation, operation, and maintenance of the Kluhsman Racing Products KRC-8270 Yoke Assembly. This component is designed to enhance the adjustability and comfort of collapsible steering columns in racing applications, specifically fitting 1-1/2" cross bars in Late Model/Modified Stock Cars.

Image: The Kluhsman Racing Products KRC-8270 Yoke Assembly, a durable metal component designed for steering column adjustability. It features a central shaft connecting two bracket arms, each with circular openings and multiple bolt holes for mounting.

Specifications

Setup and Installation

Proper installation is crucial for the safety and performance of your steering system. It is recommended that installation be performed by a qualified mechanic.

Required Tools:

• Standard wrench set
• Torque wrench
• Measuring tape
• Safety glasses and gloves

Installation Steps:

1. Preparation: Ensure the vehicle is safely secured and the steering column is accessible. Disconnect the battery if working near electrical components.
2. Remove Existing Components (if applicable): Carefully remove any existing bracketry or components that will be replaced by the KRC-8270 assembly.
3. Positioning the Yoke Assembly: The KRC-8270 is designed to fit a 1-1/2" cross bar. Position the yoke assembly onto the cross bar. The assembly is fully adjustable to accommodate various driver sizes and preferences.
4. Utilizing Spacers: Use the provided spacers to fine-tune the position and angle of your steering column. Experiment with different spacer configurations to achieve the desired ergonomic setup.
5. Securing the Assembly: Fasten the yoke assembly securely to the cross bar using appropriate hardware (not included, refer to vehicle manufacturer specifications for bolt size and torque). Ensure all connections are tight and free from play.
6. Connecting to Steering Column: The KRC-8270 is designed for 1-1/8" steering columns. If using the KRC-8271 (3/4" column), it fits over the Quick Disconnect steering wheel hex without requiring the steering shaft to be cut. Connect the steering column to the yoke assembly.
7. Final Check: Double-check all fasteners for tightness. Verify that the steering column moves freely and without obstruction through its full range of motion.

Operating Instructions

The KRC-8270 Yoke Assembly is a passive component designed to provide structural support and adjustability for your steering column. Once installed, its operation is integrated with the vehicle's steering system.

Adjusting the Steering Column:

• The assembly allows for adjustment of the steering column's position. Loosen the securing bolts slightly to make adjustments.
• Carefully slide or pivot the steering column to the desired position.
• Once the optimal position is found, re-tighten all securing bolts to the manufacturer's specified torque settings.
• Always ensure the steering column is firmly secured before operating the vehicle.

Maintenance

Regular inspection and maintenance will ensure the longevity and safe operation of your KRC-8270 Yoke Assembly.

Routine Checks:

• Visual Inspection: Periodically inspect the assembly for any signs of wear, damage, cracks, or corrosion.
• Fastener Tightness: Check all bolts and nuts securing the assembly to the cross bar and steering column. Re-torque to specifications if necessary. Loose fasteners can lead to play in the steering system.
• Cleanliness: Keep the assembly clean from dirt, debris, and corrosive substances. Use a mild cleaner and soft cloth.

If any damage or excessive wear is observed, replace the component immediately. Do not attempt to repair damaged parts.

Troubleshooting

This section addresses common issues that may arise with the KRC-8270 Yoke Assembly.

Issue: Play or Looseness in Steering Column

• Possible Cause: Loose mounting bolts.
• Solution: Inspect all bolts securing the yoke assembly to the cross bar and the steering column. Re-torque them to the recommended specifications.
• Possible Cause: Incorrectly installed spacers.
• Solution: Review the installation steps and ensure spacers are correctly positioned and not allowing for excessive movement.
• Possible Cause: Worn components (e.g., bushings, bearings in the steering column itself).
• Solution: This assembly does not contain moving parts that wear in this manner. If play persists after checking fasteners, inspect other components of the steering column and system.

Issue: Difficulty Adjusting Steering Column Position

• Possible Cause: Bolts are too tight.
• Solution: Loosen the securing bolts slightly to allow for adjustment. Do not fully remove them unless necessary for re-installation.
• Possible Cause: Debris or corrosion.
• Solution: Clean the assembly and surrounding areas. Ensure no foreign objects are impeding movement.

If troubleshooting steps do not resolve the issue, contact Kluhsman Racing Products customer support or a qualified automotive professional.

Warranty Information

Kluhsman Racing Products stands behind the quality of its components. For specific warranty terms and conditions, please refer to the official warranty statement provided with your purchase or visit the Kluhsman Racing Products official website. Generally, warranties cover defects in materials and workmanship under normal use.

Note: Damage resulting from improper installation, misuse, modification, or racing incidents may not be covered under warranty.

Support and Contact

For further assistance, technical support, or inquiries regarding the KRC-8270 Yoke Assembly, please contact Kluhsman Racing Products directly.

• Website: www.kluhsmanracing.com (Note: This is a placeholder URL, please refer to official product documentation for actual contact details.)
• Email: support@kluhsmanracing.com (Note: This is a placeholder email, please refer to official product documentation for actual contact details.)
• Phone: Please check the official website for current contact numbers.

When contacting support, please have your product model number (KRC-8270) and purchase information ready.