Gorilla Tough & Clear Double Sided Mounting Tape User Manual

Product Overview

Gorilla Tough & Clear Mounting Tape is a clear, double-sided adhesive tape designed for instant, long-lasting, and weatherproof bonds. It is engineered to hold up to 38 pounds and remains crystal clear without yellowing over time. This versatile tape is suitable for both indoor and outdoor projects, adhering effectively to a variety of smooth and rough surfaces.

Figure 1: Front view of the Gorilla Tough & Clear Mounting Tape packaging, highlighting its strength and clarity.

Key Features:

• Heavy Duty: Designed to mount objects weighing up to 38 pounds instantly.
• All-Purpose: Functions reliably both indoors and outdoors, with an industrial-strength weatherproof adhesive.
• All Surface: Specially formulated to grip rough and uneven surfaces including wood, stone, stucco, plaster, and brick.
• Extra Long: Provides 150 inches of permanent two-way bonding.
• Extra Narrow: Measures 1 inch across, allowing for discreet placement behind objects.
• Crystal Clear: Tape remains clear and does not yellow over time.

Setup and Application

Proper preparation and application are crucial for achieving the strongest bond. Follow these steps carefully:

Preparation:

• Ensure surfaces are flat, dry, and free of dirt and oil. Clean surfaces thoroughly prior to application.
• Apply tape when temperature is above 50°F (10°C).
• Do not use on wallpaper, delicate surfaces, polyethylene and polypropylene plastics, Teflon® or other non-stick surfaces.

Application Steps:

1. Apply Tape: Apply tape to the back of the object vertically, allowing for even distribution of weight. Avoid touching the adhesive surfaces of the tape. A general guideline is to apply 4 inches of tape per 1 pound of weight.
   

   Figure 2: Applying the tape vertically to ensure proper weight distribution.

2. Cut and Secure: Cut the tape to the desired length and press firmly to secure it to the object.
   

   Figure 3: Ensuring the tape is securely pressed onto the object.

3. Remove Liner: Carefully remove the clear liner from the tape. For easier liner removal, pinch and stretch a corner of the adhesive until the liner lifts from the tape.
   

   Figure 4: Peeling off the clear protective liner from the tape.

4. Position and Press: Align the object to its desired placement on the surface. Press firmly for 60 seconds. The heavy-duty tape conforms to the surface and creates a strong, permanent bond.

Figure 5: Detailed application instructions from the product packaging.

Operating Instructions and Best Practices

For optimal performance and longevity of the bond, consider the following best practices:

• Surface Contact: Tape must make complete contact with the surface. If the surface is uneven, the tape may not be able to make full contact and will not hold effectively.
• Weight Distribution: When mounting objects, ensure the weight is evenly distributed across the applied tape. Avoid concentrating weight on a single small area.
• Temperature Range: For best results, apply within a temperature range of 40°F to 248°F (4°C to 120°C).
• Permanent Bond: This tape is designed for permanent applications. Once an object is mounted, it is intended to be held in place permanently and is not meant for removal.

Maintenance

As Gorilla Tough & Clear Mounting Tape creates a permanent bond, ongoing maintenance primarily involves ensuring the integrity of the initial application and proper storage of unused tape.

• Surface Cleanliness: Always ensure surfaces are clean and dry before applying tape to prevent adhesion issues.
• Tape Storage: Store unused tape in its original packaging in a cool, dry place to maintain its adhesive properties.
• Avoid Contamination: Prevent dust, dirt, or oils from coming into contact with the adhesive surface of the tape before application.

Troubleshooting

While Gorilla Tough & Clear Mounting Tape is designed for strong, permanent bonds, certain situations may lead to unexpected results. Here are common issues and considerations:

• Adhesion Failure: If the tape does not hold, ensure the surfaces were clean, dry, and within the recommended temperature range (above 50°F). Also, verify that the tape made complete contact with the surface and that the object's weight did not exceed the tape's capacity (4 inches per 1 lb).
• Surface Damage Upon Removal: This tape is permanent. Attempting to remove a mounted object may cause surface damage or leave adhesive residue. It is crucial to consider the permanent nature of the bond before application.
• Incompatible Surfaces: The tape is not recommended for use on wallpaper, delicate surfaces, polyethylene, polypropylene plastics, Teflon®, or other non-stick surfaces. Using it on these materials may result in poor adhesion or damage.
• Yellowing Over Time: The crystal clear tape is formulated to resist yellowing. If discoloration occurs, it may be due to extreme environmental conditions or prolonged exposure to certain chemicals not typically encountered in standard use.

Specifications

Warranty and Support

For any questions, concerns, or support regarding your Gorilla Tough & Clear Mounting Tape, please contact The Gorilla Glue Company directly.

• Manufacturer: The Gorilla Glue Company
• Website: www.gorillatough.com
• Customer Service: 1-800-966-3458

Please refer to the manufacturer's website or contact customer service for specific warranty details and policies.