Introduction
This manual provides comprehensive instructions for the safe and effective installation, operation, and maintenance of your Peerless-AV T6X4 Universal Flat/Tilt Wall Mount. Please read this manual thoroughly before beginning installation and retain it for future reference.
The Peerless-AV T6X4 wall mount is designed for 50-inch to 65-inch displays, offering a low-profile solution with flexible viewing angles. Its design prioritizes ease of installation, featuring a Hook-and-Hang system and Easy-Glide adaptors for a secure setup.
Safety Information
WARNING: Failure to read, understand, and follow all instructions can result in serious personal injury, property damage, or voiding of factory warranty. It is the installer's responsibility to ensure all components are properly assembled and installed.
IMPORTANT: Ensure the mounting surface can safely support the combined weight of the mount and the display. Always use appropriate tools and safety equipment. If unsure about any part of the installation, consult a qualified professional.
Package Contents
Verify that all components are present before beginning installation. If any parts are missing or damaged, do not proceed with installation. Contact Peerless-AV customer support.
- Wall Plate Assembly
- Display Adaptor Brackets (2)
- Mounting Hardware Kit (various screws, washers, spacers)
- Instruction Manual
Image: Main components of the Peerless-AV T6X4 Universal Flat/Tilt Wall Mount, including the wall plate and display adaptor brackets.
Setup and Installation
This section outlines the steps for installing the Peerless-AV T6X4 wall mount. It is recommended to have at least two people for the installation process, especially when lifting the display.
Step 1: Attach Display Adaptor Brackets to Display
- Carefully place the display face down on a soft, clean surface to prevent scratches.
- Identify the VESA mounting holes on the back of your display.
- Select the appropriate screws, washers, and spacers from the hardware kit that fit your display's mounting holes.
- Attach the two display adaptor brackets to the back of the display, ensuring they are centered and securely fastened. The Hook-and-Hang system requires the top hooks to face upwards.
Image: Close-up view of the display adaptor brackets being attached to the rear of a television, showing the screw points and bracket orientation.
Step 2: Mount Wall Plate to Wall
- Determine the desired height and location for your display on the wall. Use a stud finder to locate wall studs if mounting to wood.
- Position the wall plate against the wall at the desired height and use a level to ensure it is perfectly horizontal.
- Mark the drilling locations through the holes on the wall plate.
- Drill pilot holes according to the recommended drill bit size for your wall type (wood stud, concrete, brick).
- Secure the wall plate to the wall using the appropriate lag bolts and washers provided in the hardware kit. Ensure it is firmly attached.
Step 3: Hang Display on Wall Plate
- With assistance, carefully lift the display with the attached adaptor brackets.
- Align the top hooks of the display adaptor brackets with the top edge of the wall plate.
- Lower the display slowly, allowing the Easy-Glide adaptors to hook onto the wall plate. Ensure the display is securely seated.
- Engage the safety screws or locking mechanisms on the bottom of the adaptor brackets to prevent accidental dislodgement.
Image: A television securely mounted on a wall using the Peerless-AV T6X4 mount, integrated into a living room environment above a fireplace.
Operating Instructions
The Peerless-AV T6X4 mount offers simple adjustments for optimal viewing.
Tilt Adjustment
- The mount allows for a +70 tilt adjustment.
- To adjust the tilt, loosen the tilt knobs or bolts located on the side of the display adaptor brackets.
- Carefully tilt the display to the desired angle.
- Tighten the tilt knobs or bolts to secure the display in place.
Side-to-Side Adjustment
- After installation, the display can be shifted horizontally along the wall plate for ideal positioning.
- Ensure the safety screws are disengaged before attempting to slide the display.
- Gently slide the display left or right along the wall plate until it is centered or positioned as desired.
- Re-engage the safety screws to lock the display in its new position.
Maintenance
The Peerless-AV T6X4 wall mount requires minimal maintenance to ensure long-term performance.
- Cleaning: Use a soft, dry cloth to wipe down the mount. Avoid abrasive cleaners or solvents that could damage the finish.
- Periodic Inspection: Periodically check all screws and bolts to ensure they remain tight. Over time, vibrations or adjustments can cause fasteners to loosen.
- Weight Capacity: Do not exceed the maximum weight capacity of the mount. Refer to the specifications section for details.
Troubleshooting
If you encounter issues with your Peerless-AV T6X4 wall mount, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Mount feels unstable after installation. | Wall plate not securely fastened; incorrect anchors used; wall surface not strong enough. | Ensure all lag bolts are tightened. Verify wall type and use appropriate fasteners. Consult a professional if wall integrity is a concern. |
| Display is not level. | Wall plate installed unevenly. | Remove display, re-level wall plate using a spirit level, and re-secure. |
| Difficulty tilting the display. | Tilt knobs/bolts are too tight. | Loosen tilt knobs/bolts slightly, adjust tilt, then re-tighten. |
Specifications
| Model Number | T6X4 |
| Brand | Peerless-AV |
| Mounting Type | Wall Mount |
| Movement Type | Tilt |
| Compatible Display Sizes | 50 Inches to 65 Inches |
| Maximum Tilt Angle | +7 Degrees |
| Low Profile Distance from Wall | 1.27 inches |
| Universal Mounting Pattern (Max) | 600 mm x 400 mm (23.62 in. W x 15.75 in. H) |
| Item Weight | 4.07 pounds |
| Product Dimensions (L x W x H) | 1.27 x 25.2 x 16.46 inches |
| Color | Black |
| UPC | 735029342526 |
| Manufacturer | PEERLESS INDUSTRIES INC |
Warranty and Support
For warranty information and technical support, please contact Peerless-AV directly. Keep your purchase receipt as proof of purchase.
- Manufacturer: PEERLESS INDUSTRIES INC
- Brand: Peerless-AV
- Website: www.peerless-av.com (Note: This is a generic link, actual support link may vary.)
For the most up-to-date support information, please visit the official Peerless-AV website or refer to the product packaging.
