Fossil Men's 48mm Flynn Chronograph Watch BQ2232 Instruction Manual

Introduction

Thank you for choosing the Fossil Men's 48mm Flynn Chronograph Watch BQ2232. This timepiece combines classic design with modern chronograph functionality. This manual provides essential information for setting up, operating, and maintaining your watch to ensure its longevity and accurate performance.

Image 1: Front view of the Fossil Flynn Chronograph Watch BQ2232, showcasing the smoke-tone stainless steel case and bracelet, white dial with Roman numerals, and chronograph sub-dials.

Setup

1. Setting the Time

1. Pull the crown (middle button on the right side of the watch) out to position 2.
2. Turn the crown clockwise or counter-clockwise to set the hour and minute hands to the correct time.
3. Push the crown back into position 1 to start the watch.

2. Setting the Date (if applicable)

Note: This model features a chronograph movement, but specific date setting instructions are not provided in the product description. If your watch has a date function, typically you would pull the crown out to position 1 (halfway) and turn it to adjust the date. Refer to the full manufacturer's manual for precise instructions if a date window is present.

3. Bracelet Adjustment

The stainless steel bracelet can be adjusted for a comfortable fit. This typically involves removing or adding links. It is recommended to have this procedure performed by a qualified jeweler or watch technician to prevent damage to the bracelet or watch.

Image 2: The Fossil Flynn Chronograph Watch BQ2232 worn on a wrist, demonstrating its size and fit. The smoke-tone stainless steel bracelet is visible.

Operating the Chronograph

Your Fossil Flynn Chronograph watch features a stopwatch function for measuring elapsed time.

1. Start/Stop: Press the top pusher (button A) to start the chronograph. Press it again to stop the chronograph.
2. Reset: While the chronograph is stopped, press the bottom pusher (button B) to reset all chronograph hands to their zero positions.

The sub-dials typically display elapsed seconds, minutes, and sometimes hours, depending on the specific chronograph movement.

Maintenance

1. Cleaning

• Wipe the watch case and bracelet regularly with a soft, dry cloth to remove dust and dirt.
• For stainless steel, a slightly damp cloth can be used, followed by a dry cloth. Avoid harsh chemicals or abrasive materials.

2. Water Resistance

This watch is water resistant up to 50 meters (5 ATM). This means it is suitable for short periods of recreational swimming in shallow water. Do not press any buttons or pull the crown while the watch is wet or submerged. Avoid hot water, steam, and diving, as these can compromise the water resistance seals.

3. Battery Replacement

The watch is powered by a quartz movement, requiring a battery. When the watch stops or the second hand begins to jump erratically (indicating a low battery), it is time for a replacement. It is highly recommended to have the battery replaced by an authorized Fossil service center or a professional watchmaker to ensure proper sealing and maintain water resistance.

4. General Care

• Avoid exposing your watch to extreme temperatures, strong magnetic fields, or sudden impacts.
• Keep the watch away from solvents, detergents, perfumes, and cosmetics, as these can damage the case, seals, or bracelet.

Troubleshooting

• Watch Not Running: Check if the crown is fully pushed in. If it is, the battery may need replacement.
• Chronograph Hands Not Resetting to Zero: If the chronograph hands do not return to their 12 o'clock (zero) position after pressing the reset button, the chronograph may need calibration. This usually involves pulling the crown out to a specific position and using the pushers to adjust the hands. Refer to a detailed chronograph manual or seek professional assistance.
• Condensation Inside the Crystal: This indicates a breach in the water resistance. Have the watch inspected and serviced immediately by a professional to prevent further damage.

Specifications

Warranty and Support

Fossil watches typically come with a limited warranty covering manufacturing defects. For detailed warranty information, terms, and conditions, please refer to the official Fossil website or the warranty card included with your purchase.

For service, repairs, or further assistance, please contact Fossil customer support or visit an authorized Fossil service center.

You can find more information and contact details on the official Fossil website: www.fossil.com

Visit the Fossil Store on Amazon: Fossil Store