Introduction
This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your Five Star Outdoor HD TV Antenna (Model FSA-3806). This antenna is designed to receive digital TV, 4K HD TV, 1080p, 1080i, 720p broadcasts, and FM radio signals. It features a motorized 360-degree rotation for optimal signal reception, a built-in super low noise amplifier, and an LTE filter to minimize interference from 4G phone signals. Please read this manual thoroughly before use to ensure proper setup and performance.
Package Contents
Verify that all items listed below are included in your package:
- Antenna (Base Element, Director Elements, Reflector Panels)
- Control Box
- Remote Control
- UL Approved Power Supply
- 40ft RG6 Coaxial Cable
- 4-Way Coaxial Splitter
- Cable Clips
- Mounting Hardware (screws, wingnuts, brackets)
- VHF Reception Enhancement Rod
Image: All components of the Five Star Outdoor HD TV Antenna laid out, including the antenna elements, control box, remote, cables, and mounting hardware.
Setup
Follow these steps to assemble and install your antenna:
- Assemble the Antenna Elements: Carefully unfold the base element and director elements. Secure them using the provided wingnuts and screws as indicated in the included manual diagrams. Attach the reflector panels to the main antenna frame.
- Attach VHF Enhancement Rod: Secure the VHF reception enhancement rod to the designated position on the antenna using the provided wingnut.
- Mount the Antenna: Choose a suitable outdoor location for mounting, such as a roof, eave, or deck. Ensure the location provides a clear line of sight to broadcast towers. Use the provided mounting hardware to securely attach the antenna to a sturdy pole or surface. The antenna includes a J-pole mount for flexible installation.
- Connect Coaxial Cable to Antenna: Connect one end of the 40ft RG6 coaxial cable to the antenna's output port. Ensure the connection is tight and weatherproof.
- Route Coaxial Cable: Carefully route the coaxial cable from the antenna to the indoor location where your TV and control box will be placed. Avoid sharp bends or kinks in the cable.
- Connect Coaxial Cable to Control Box: Connect the other end of the coaxial cable from the antenna to the 'ANT IN' port on the control box.
- Connect Power Supply: Plug the UL-listed power supply into the control box's 'AC IN' port and then into a standard electrical outlet. The power indicator light on the control box should illuminate.
- Connect Control Box to TV: Connect a coaxial cable from the 'TV1' or 'TV2' output on the control box to the 'ANT IN' or 'CABLE IN' port on your television. If connecting multiple TVs, use the provided 4-way splitter.
Image: The assembled Five Star Outdoor HD TV Antenna shown with the control box, remote, and coaxial cable.
Image: A diagram illustrating how to connect the antenna to either 2 televisions directly or up to 5 televisions using the included 4-way splitter.
Video: Official product video demonstrating the features and setup of the Five Star Outdoor HD TV Antenna FSA-3806.
Operating Instructions
Once the antenna is installed and connected, follow these steps for optimal performance:
- Power On: Ensure your TV and the antenna control box are powered on.
- Select Input: On your TV, select the correct input source (e.g., 'Antenna' or 'TV') that corresponds to where the control box is connected.
- Perform Channel Scan: Access your TV's menu, navigate to 'Settings' or 'Setup', and then find the 'Channel Scan' or 'Auto Program' option. Select 'Air' or 'Antenna' as the signal source and initiate the scan. This process may take several minutes.
- Motorized Rotation: Use the included remote control to rotate the antenna. Press and hold the rotation button on the remote to turn the antenna in one direction. Release and press again to change direction. Observe the signal strength on your TV while rotating to find the optimal direction for the best reception. The antenna rotates 360 degrees and will reverse direction when it reaches its limit.
- Optimize Reception: For best results, use online tools or apps (such as the FCC's DTV Reception Maps at fcc.gov/media/engineering/dtvmaps) to identify the direction of local broadcast towers. Point your antenna towards these towers for the clearest channels.
Image: The infrared remote control used to operate the 360-degree motorized rotation feature of the antenna.
Image: Visual guide showing the three main steps: 1) Connect the antenna to the TV, 2) Scan for channels in the TV's broadcasting menu, and 3) Enjoy watching TV.
Image: Two smartphone screens displaying the FCC's DTV Reception Maps, which help users locate nearby broadcast towers to optimize antenna direction for best signal reception.
Maintenance
To ensure the longevity and optimal performance of your antenna, consider the following:
- Regular Inspection: Periodically check the antenna and mounting hardware for any signs of wear, corrosion, or damage. Ensure all connections remain secure.
- Cleaning: Gently clean the antenna elements with a soft, damp cloth to remove dirt, dust, or debris that may accumulate and affect signal reception. Avoid using harsh chemicals.
- Cable Integrity: Inspect the coaxial cable for any cracks, fraying, or damage to the outer jacket. Ensure weatherproof connections are intact to prevent moisture ingress.
- Weather Protection: While designed for all weather conditions, extreme weather events like heavy snow or ice may temporarily impact performance. Clear any heavy snow or ice accumulation from the antenna if safely possible.
Troubleshooting
If you encounter issues with your antenna, refer to the table below for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Signal / Poor Picture Quality | Incorrect antenna direction, loose cable connections, TV not on correct input, or interference. | Rotate antenna using remote for optimal signal. Check all coaxial cable connections. Ensure TV input is set to 'Antenna' or 'TV'. Perform a channel scan. Check for local interference sources. |
| Remote Control Not Working | Dead batteries, remote out of range, or obstruction. | Replace remote batteries. Ensure remote is pointed at the control box and within range. Remove any obstructions between remote and control box. |
| Antenna Not Rotating | Power issue to control box, motor malfunction, or cable obstruction. | Check if control box power light is on. Ensure power supply is connected. Inspect the antenna's rotating mechanism for any physical obstructions. |
| Limited Channels Found | Antenna not optimally aimed, local terrain/obstructions, or weak signal in your area. | Use the remote to rotate the antenna and perform multiple channel scans at different orientations. Consult FCC DTV maps for tower locations. Consider repositioning the antenna higher or in a less obstructed area. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | FSA-3806 |
| Product Dimensions | 18.31 x 10.79 x 4.49 inches |
| Item Weight | 4.59 pounds |
| Operating Frequency | 45-860MHz |
| Gain | 15-35dB |
| Impedance | 75 Ohms |
| Maximum Range | 200 Miles |
| Rotation | Motorized 360 Degree |
| Supported Broadcasts | 4K HD TV, 1080p, 1080i, 720p, UHF, VHF, FM Radio |
| Built-in Features | Super Low Noise Amplifier, LTE Filter, Auto Gain Control |
Warranty and Support
This Five Star antenna comes with a manufacturer's warranty. For specific warranty details, including duration and coverage, please refer to the documentation included in your product packaging or contact Five Star customer support directly. For technical assistance or troubleshooting beyond this manual, please reach out to the manufacturer's support channels.
