CakCity Boys Camouflage LED Sports Kids Watch Instruction Manual

Introduction

This manual provides detailed instructions for the proper setup, operation, and maintenance of your CakCity Boys Camouflage LED Sports Kids Watch. Please read this manual thoroughly to ensure optimal performance and longevity of your watch.

The CakCity Sports Watch is designed for active children, featuring multiple functions including time display, alarm, stopwatch, calendar, and EL backlight. It is built with a durable silicone band and a 50M water resistance rating, making it suitable for various sports and daily activities.

Getting Started

1. Initial Setup

Before first use, ensure you remove the protective film from the watch face. This film is applied during manufacturing to prevent scratches and should be peeled off for clear visibility.

Protective Film Removal: Gently peel off the transparent protective film from the watch display for optimal clarity.

2. Battery Information

The watch comes with one CR2 battery pre-installed. No immediate battery installation is required. For future battery replacement, please refer to the 'Care and Maintenance' section.

Operating Instructions

The watch features four main buttons: LIGHT, MODE, ADJ, and SET/START / RESET/STOP. These buttons are used to navigate through modes and adjust settings.

Watch Overview: The main display shows time, and buttons are labeled for easy identification.

Button Functions:

• LIGHT: Activates the EL backlight for viewing in low-light conditions.
• MODE: Cycles through the watch's different modes: Time Display, Chronograph (Stopwatch), and Alarm Setting.
• ADJ: Used to select items for adjustment within a setting mode.
• SET/START (Top Right): In setting modes, this button is typically used to increase values or move forward. In Chronograph mode, it starts and stops the timer.
• RESET/STOP (Bottom Right): In setting modes, this button is typically used to reset values or confirm settings. In Chronograph mode, it resets the timer.

1. Time and Date Setting

1. From the normal time display, press the MODE button three times to enter Time Setting mode. The seconds will begin to flash.
2. Press the ADJ button to cycle through the settings: Seconds → Hour → Minute → Month → Date → Day of Week.
3. While the desired value is flashing, use the SET/START button to adjust the value.
4. Once all settings are correct, press the MODE button to exit Time Setting mode and return to the normal time display.

2. Alarm Setting

1. From the normal time display, press the MODE button twice to enter Alarm Setting mode. The hour digits will begin to flash.
2. Press the ADJ button to select between Hour and Minute settings.
3. Use the SET/START button to adjust the flashing hour or minute value.
4. Once the desired alarm time is set, press the MODE button to exit Alarm Setting mode.
5. To turn the alarm ON/OFF, press and hold the SET/START button and then press the RESET/STOP button simultaneously in normal time display mode. An alarm icon will appear/disappear.

3. Stopwatch Function (Chronograph)

1. From the normal time display, press the MODE button once to enter Chronograph mode. The display will show '00:00:00'.
2. Press the SET/START button to start the stopwatch.
3. Press the SET/START button again to stop the stopwatch.
4. Press the RESET/STOP button to reset the stopwatch to '00:00:00'.
5. To exit Chronograph mode, press the MODE button.

Multifunction Display: Icons illustrating the watch's various features including time, backlight, water resistance, alarm, and timer.

4. EL Backlight

Press the LIGHT button (top left) to illuminate the display. The backlight will remain on for a few seconds, allowing you to read the time in the dark.

LED Backlight: The watch display illuminates for easy reading in low-light conditions.

Care and Maintenance

1. Water Resistance (50M / 164 Ft)

This watch is designed with 50 meters (164 feet) of water resistance, making it suitable for swimming and bathing in cold water. However, it is crucial to observe the following precautions:

• DO NOT press any buttons while the watch is underwater. Pressing buttons underwater can compromise the waterproof seals.
• Keep the watch away from steam and hot water. High temperatures and steam can damage the waterproof ring and internal components.

50M Water Resistance: Suitable for daily water exposure like hand washing, rain, and swimming in cold water.

2. Cleaning

To clean your watch, wipe it with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish or components.

3. Battery Replacement

The watch uses one CR2 battery. When the display becomes dim or the watch stops functioning, it may be time to replace the battery. It is recommended to have battery replacement performed by a qualified technician to ensure the waterproof seal is maintained.

Troubleshooting

• Watch not functioning: Check if the protective film has been removed. If the display is blank or dim, the battery may need replacement.
• Water inside the watch: If water or condensation appears inside the watch, stop using it immediately and seek professional service. This usually indicates a compromised waterproof seal, often due to pressing buttons underwater or exposure to hot water/steam.
• Incorrect time display: Follow the 'Time and Date Setting' instructions to reset the time.

If you encounter issues not covered in this manual, please contact CakCity customer service for assistance.

Product Specifications

Basic Information and Dimensions: Key measurements and material details for the watch.

Physical Specifications: Details on watch band perimeter, buckle type, band material, and case construction.

Warranty and Support

CakCity is committed to providing quality products and customer satisfaction. While specific warranty details are not provided in this manual, we offer friendly customer services to assist with any product-related inquiries or issues.

For support, please refer to the contact information provided with your purchase or visit the official CakCity website.