GREX BNCOM00000035

N-com B601 R Twin Pack User Manual

Model: BNCOM00000035

Introduction

Welcome to the user manual for the N-com B601 R Basic Series Bluetooth Communication System. This twin pack system is designed to provide reliable and clear communication for motorcyclists, enhancing safety and convenience during rides. Please read this manual carefully before installation and use to ensure optimal performance and longevity of your device.

Setup and Installation

The N-com B601 R system is designed for easy integration into compatible Nolan and GREX helmets.

Package Contents

  • 2 x N-com B601 R Communication Units
  • 2 x Microphone and Speaker Kits
  • 2 x USB Charging Cables
  • User Manual (this document)
N-com B601 R Twin Pack product box

Image: The N-com B601 R Twin Pack retail box, showing two helmet icons, indicating it contains two complete communication systems.

Installation Steps

  1. Prepare the Helmet: Ensure your helmet is compatible with N-com systems. Locate the designated slots for the communication unit, speakers, and microphone.
  2. Install the Main Unit: Carefully insert the N-com B601 R unit into the external slot on the left side of the helmet. Ensure it clicks securely into place.
    3. N-com B601 R unit installed on a white motorcycle helmet, side view

    Image: A white motorcycle helmet with the N-com B601 R communication unit installed on its left side, showing the microphone boom extended.

  3. Position Speakers: Place the speakers inside the helmet's ear pockets, ensuring they are aligned with your ears for optimal audio quality. Use the provided adhesive pads if necessary.
  4. Mount Microphone: Attach the microphone to the designated area inside the helmet, typically near the chin bar, ensuring it is close to your mouth but does not obstruct your vision or breathing.
    5. N-com B601 R unit installed on a white motorcycle helmet, rear view

    Image: A rear-side view of a white motorcycle helmet with the N-com B601 R communication unit installed, highlighting its sleek integration.

  5. Connect Cables: Route all cables neatly within the helmet's lining, connecting them to the main unit. Avoid pinching or damaging the cables.
  6. Initial Charge: Before first use, fully charge the unit using the provided USB cable. The charging indicator will change once charging is complete.

Operating Instructions

The N-com B601 R features intuitive controls for easy operation while riding.

Close-up of the N-com B601 R communication unit with buttons

Image: A close-up view of the N-com B601 R communication unit, showing its ergonomic design and the main control buttons, including the prominent "N" button.

Power On/Off

To power on, press and hold the main "N" button for approximately 3 seconds until you hear an audible confirmation. To power off, press and hold the "N" button again for 3 seconds.

Bluetooth Pairing

  1. Pairing Mode: With the unit off, press and hold the "N" button for about 5-7 seconds until the LED indicator flashes rapidly, indicating pairing mode.
  2. Device Search: On your mobile phone or other Bluetooth device, search for available devices. Select "N-com B601 R" from the list.
  3. Confirmation: Once paired, the LED indicator will change, and you will hear a confirmation tone.

Intercom Communication

The B601 R Twin Pack allows for rider-to-passenger or bike-to-bike communication.

  1. Initiate Intercom: Briefly press the "N" button on one unit to initiate an intercom connection with a paired B601 R unit.
  2. End Intercom: Briefly press the "N" button again to end the intercom conversation.

Music Playback and Phone Calls

  • Music Play/Pause: Briefly press the "N" button to play or pause music from a paired device.
  • Next/Previous Track: Use the volume up/down buttons to skip tracks.
  • Answer/End Call: Briefly press the "N" button to answer an incoming call or end an ongoing call.
  • Reject Call: Press and hold the "N" button for 2 seconds to reject an incoming call.

Volume Adjustment

Use the dedicated volume up (+) and volume down (-) buttons on the unit to adjust the audio level.

Maintenance and Care

Proper care ensures the longevity and optimal performance of your N-com B601 R system.

  • Cleaning: Use a soft, damp cloth to clean the exterior of the unit. Do not use abrasive cleaners or solvents.
  • Storage: Store the unit in a dry place at room temperature when not in use. Avoid extreme temperatures.
  • Charging: Always use the provided USB cable for charging. Do not overcharge the battery.
  • Water Resistance: The unit is designed to be weather-resistant, but avoid submerging it in water.

Troubleshooting

ProblemSolution
Unit does not power onEnsure the battery is charged. Connect to a power source and try again.
Cannot pair with phoneEnsure the unit is in pairing mode (rapidly flashing LED). Turn off and on Bluetooth on your phone. Try resetting the unit.
Intercom not connectingEnsure both units are powered on and within range. Re-pair the units if necessary.
No audio from speakersCheck volume levels. Ensure speakers are properly connected to the main unit.

Technical Specifications

  • Model Name: N BNCOM00000035
  • Product Dimensions: 7 x 6 x 2 inches (approximate, for the twin pack)
  • Item Weight: 1.03 pounds (469 Grams)
  • Connectivity: Bluetooth
  • Compatibility: Designed for Nolan and GREX helmets
  • Manufacturer: N (Nolan)
  • Special Features: Intercom, Music Playback, Phone Calls

Warranty and Support

For warranty information and technical support, please refer to the official GREX or Nolan N-com website, or contact your authorized dealer. Keep your proof of purchase for warranty claims.

Online Resources:

© 2024 GREX. All rights reserved.