CREATE /POTTS/Express Multi-Capsule Espresso Machine User Manual

1. Introduction

Thank you for choosing the CREATE /POTTS/Express Multi-Capsule Espresso Machine. This compact and versatile coffee maker is designed to brew various types of coffee, including ground coffee and capsules from popular brands like Dolce Gusto and Nespresso. With 19 bar pressure and 1450 W power, it ensures a rich and aromatic coffee experience. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to help you get the most out of your new coffee machine.

Front view of the CREATE /POTTS/Express Multi-Capsule Espresso Machine.

2. Important Safety Instructions

• Read all instructions before using the appliance.
• Do not immerse the appliance, power cord, or plug in water or any other liquid.
• Ensure the voltage indicated on the appliance corresponds to your local mains voltage before connecting.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
• The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
• Do not use outdoors.
• Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
• Do not use appliance for other than intended use.
• Caution: If the locking lever is stiff, the capsule may not be seated correctly. Remove and reinsert. Do not use force.
• Important: Before first use or after accidental dry running, the pump may need to be primed. Refer to the setup section for instructions.

3. Product Components

Familiarize yourself with the parts of your CREATE /POTTS/Express coffee machine:

• Water Tank: Transparent, 600 ml capacity, located at the back.
• Control Buttons: For power and brewing selection.
• Brewing Head: Where capsules or ground coffee adapters are inserted.
• Drip Tray: Removable for easy cleaning and to accommodate different cup sizes.
• Capsule Adapters: Specific holders for Nespresso, Dolce Gusto, and ground coffee.
• Locking Lever: Secures the capsule adapter during brewing.

Key components: water tank (top left), priming tool (top right), ground coffee adapter (bottom right), and the main unit (bottom left).

Various capsule holders for different coffee types, including ground coffee, Nespresso, and Dolce Gusto compatible capsules.

4. Initial Setup

1. Unpacking: Carefully remove all packaging materials and ensure all components are present.
2. First Clean: Before first use, clean the water tank, drip tray, and capsule adapters with warm, soapy water. Rinse thoroughly and dry.
3. Positioning: Place the machine on a stable, flat surface away from heat sources and water.
4. Fill Water Tank: Fill the transparent water tank with fresh, cold water up to the MAX line. Ensure the tank is properly seated.
5. Priming the Pump:
   • Ensure the water tank is filled.
   • Place a cup under the coffee outlet.
   • Turn on the machine.
   • Without inserting any capsule or ground coffee, press the brew button. Water should start flowing. If not, the pump may need manual priming.
   • To manually prime, use the provided priming tool (a long, thin tool, often with a small cup at one end). Insert it into the water inlet or follow specific instructions in the diagram if available to help draw water through the system. This is crucial if the machine has run dry.
6. First Rinse Cycle: Run at least two cycles with only water (no coffee) to clean the internal system.

5. Operating Instructions

The CREATE /POTTS/Express machine is designed for multi-capsule compatibility and ground coffee.

5.1 Preparing Coffee with Capsules (Nespresso/Dolce Gusto Compatible)

1. Fill Water Tank: Ensure the water tank is filled with fresh water.
2. Power On: Plug in the machine and press the power button. Wait for the indicator light to stop flashing, indicating it's ready.
3. Insert Adapter: Select the appropriate capsule adapter (e.g., Nespresso or Dolce Gusto compatible).
4. Place Capsule: Insert the capsule into the adapter.
5. Close Lever: Place the adapter with the capsule into the brewing head and firmly close the locking lever. Ensure it clicks into place without excessive force.
6. Position Cup: Place your desired cup on the drip tray. The drip tray height can be adjusted by pulling out the removable rack to accommodate different cup sizes.
7. Brew Coffee: Press the desired brew button (e.g., short or long coffee). The machine will start brewing.
8. Stop Brewing: The machine will stop automatically, or you can press the button again to stop manually for a desired volume.
9. Remove Capsule: After brewing, lift the locking lever and carefully remove the used capsule and adapter. Dispose of the capsule.

Operating the lever to secure the capsule adapter before brewing.

Coffee being dispensed into a cup, demonstrating the brewing process.

5.2 Preparing Coffee with Ground Coffee

1. Fill Water Tank: Ensure the water tank is filled with fresh water.
2. Power On: Plug in the machine and press the power button. Wait for the indicator light to stop flashing.
3. Prepare Ground Coffee Adapter: Use the ground coffee adapter. Fill it with your desired amount of finely ground coffee. Do not overfill or tamp too hard.
4. Insert Adapter: Place the ground coffee adapter into the brewing head and firmly close the locking lever.
5. Position Cup: Place your cup on the drip tray.
6. Brew Coffee: Press the desired brew button.
7. Stop Brewing: The machine will stop automatically, or you can press the button again to stop manually.
8. Clean Adapter: After brewing, lift the locking lever, remove the adapter, and dispose of the used coffee grounds. Clean the adapter thoroughly.

A hand inserting the ground coffee adapter into the machine's brewing chamber.

6. Cleaning and Maintenance

Regular cleaning ensures optimal performance and extends the life of your coffee machine.

1. Daily Cleaning:
   • Empty and rinse the drip tray after each use.
   • Wipe the exterior of the machine with a damp cloth.
   • Rinse the water tank daily and refill with fresh water.
   • Clean used capsule adapters immediately after use. Non-electric parts are dishwasher safe.
2. Descaling:
   • Depending on water hardness and frequency of use, descale the machine every 2-3 months.
   • Use a suitable descaling solution for coffee machines. Follow the descaling solution manufacturer's instructions.
   • Typically, you will fill the water tank with the descaling solution, run several cycles through the machine without coffee, then rinse thoroughly with fresh water.
3. Storage: If storing the machine for an extended period, ensure it is clean, dry, and empty of water. Store in a cool, dry place.

7. Troubleshooting

8. Product Specifications

Product dimensions: 26.8 cm (Depth) x 11 cm (Width) x 26 cm (Height).

9. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or contact CREATE customer service. Keep your proof of purchase for any warranty claims.